Refer to the exhibit. How does the router manage traffic to 192.168.12.16? A. It chooses the EIGRP route because it has the lowest administrative distance. B. It load-balances traffic between all three routes. C. It chooses the OSPF route because it has the longest prefix inclusive of the destination address. D. It selects the RIP route because it has the longest prefix inclusive of the destination address. A packet is destined for 10.10.1.22. Which static route does the router choose to forward the packet? A. ip route 10.10.1.0 255.255.255.240 10.10.255.1 B. ip route 10.10.1.20 255.255.255.252 10.10.255.1 C. ip route 10.10.1.16 255.255.255.252 10.10.255.1 D. ip route 10.10.1.20 255.255.255.254 10.10.255.1. Which interface mode must be configured to connect the lightweight APs in a centralized architecture? A. WLAN dynamic B. trunk C. access D. management. Refer to the exhibit. Users need to connect to the wireless network with IEEE 802.11r-compatible devices. The connection must be maintained as users travel between floors or to other areas in the building. What must be the configuration of the connection? A. Disable AES encryption. B. Enable Fast Transition and select the FT 802.1x option. C. Enable Fast Transition and select the FT PSK option. D. Select the WPA Policy option with the CCKM option. Refer to the exhibit. What is the result if Gig1/11 receives an STP BPDU? A. The port transitions to STP blocking. B. The port immediately transitions to STP forwarding. C. The port goes into error-disable state. D. The port transitions to the root port. An engineer must configure traffic for a VLAN that is untagged by the switch as it crosses a trunk link. Which command should be used? A. switchport trunk encapsulation dot1q B. switchport trunk allowed vlan 10 C. switchport mode trunk D. switchport trunk native vlan 10. Refer to the exhibit. Only four switches are participating in the VLAN spanning-tree process.
Which switch becomes the permanent root bridge for VLAN 5? Branch-1: priority 614440 - Branch-2: priority 39391170 - Branch-3: priority 0 - Branch-4: root primary -. An administrator must secure the WLC from receiving spoofed association requests. Which steps must be taken to configure the WLC to restrict the requests and force the user to wait 10 ms to retry an association request? A. Enable MAC filtering and set the SA Query timeout to 10. B. Enable 802.1x Layer 2 security and set the Comeback timer to 10. C. Enable Security Association Teardown Protection and set the SA Query timeout to 10. D. Enable the Protected Management Frame service and set the Comeback timer to 10. Which technology prevents client devices from arbitrarily connecting to the network without state remediation? A. 802.11n B. 802.1x C. MAC Authentication Bypass D. IP Source Guard. An engineer needs to add an old switch back into a network. To prevent the switch from corrupting the VLAN database, with action must be taken?
A. Add the switch in the VTP domain with a lower revision number. B. Add the switch in the VTP domain with a higher revision number. C. Add the switch with DTP set to dynamic desirable. D. Add the switch with DTP set to desirable. How does the dynamically-learned MAC address feature function? A. The CAM table is empty until ingress traffic arrives at each port B. Switches dynamically learn MAC addresses of each connecting CAM table. C. The ports are restricted and learn up to a maximum of 10 dynamically-learned addresses D. It requires a minimum number of secure MAC addresses to be filled dynamically.
