A company has a Mobility Master (MM)-based solution with an employee WLAN Several users report that they can connect to the WLAN, but they cannot access all of the resources that they should.
Where should the network administrator look in the MM interface to find the roles to which these users are actually assigned? Configuration > Policies & Roles Dashboard > Security Dashboard >Clients Configuration >WlANs > Profiles > AAA Profile.
Which Mobility Master (MM) dashboard should an administrator access to view a list of rogue and interfering APs? Potential issues Security Performance Network.
A company has a Mobility Master (MM)-based solution. How does a Mobility Controller (MC) behave if it loses contact with all MM nodes? A. The MC loses all licenses and cannot support APs or clients. B. The MC retains its current licenses for 30 days.
C. The MC contacts Aruba Activate and uses the licensing limits defined there. D. The MC maintains only licenses that have been locally installed on it.
A company has an Aruba solution. The company wants to support a guest WLAN with the internal captive portal, but the company also wants to develop their own custom portal pages.
What correctly describes the level of customization that the internal captive portal supports? A. The internal captive portal must use the default pages without modification, but administrators can upload pages developed externally. B. Administrators can modify the default internal captive portal pages, but cannot upload pages developped externally. C. Administrators can modify the default internal captive portal pages or upload pages developped externally. D. The internal captive portal must use the default pages without modification, and administrators cannot upload pages developped externally.
A network administrator needs to use Aruba AirWave to view statistics for an AP’s 802.11ac radio. How can the administrator update the information on-demand rather than wait the typical interval? Click Poll Controller Now Click the 802.11ac link Log out of the interface and log back in . Refresh the browser.
A network administrator creates a guest WLAN on an Aruba Mobility Master (MM). The exhibit shows some of the settings for the WLAN.
How should the network administrator handle the Auth server settings? A. Add an authentication server with the LDAP type and the IP address of the company AD server.
B. Add an authentication server with the LDAP type and IP address 10.10.10.10.
C. Add an authentication server with the RADIUS type and IP address 10.10.10.10.
D. Add an authentication server with the RADIUS type and the IP address of the company AD server.
.
A company plans to deploy a Mobility Master (MM). The MM will manage 50 Mobility Controller (MC) appliances that will control a total of 700 APs, and 10 Virtual Mobility Controllers (VMCs) that will control a total of 200 APs.
How many MM licenses does the company require? 60 210 900 960.
A company has an Aruba solution and wants to provide guests with wireless access. The company wants to assign guests IP addresses in subnets that exist only within the Aruba solution.
Which feature should network administrators set up so guests can send traffic on the Internet without changes to the company routing solution? A. Enable NAT on the VLAN assigned to the guest WLAN.
B. Set up a dynamic default gateway on the Mobility Controllers (MCs).
C. Create destination NAT rules for the guest role.
D. Enable policy-based routing for the guest traffic.
.
Network administrators use the wizard to create a WLAN that uses WPA2-Enterprise security to a RADIUS server at 10.21.98.55. They do not manually change any settings.
Which device determines the EAP type that the wireless clients must support? Mobility Master (MM) Mobility Controller (MC) RADIUS server AP.
A network administrator creates an employee WLAN on an Aruba solution that uses WLAN WPA2-Enterprise security and an external RADIUS server. When the administrator tests the WLAN, the test client receives limited connectivity and cannot access any resources, but the RADIUS server shows that the user authenticated successfully.
What should the administrator check as a possible source of this issue? A. the connectivity between the AP that the client is associated to and the MC
B. the firewall role and policy that apply to this user
C. the certificate on the RADIUS server
D. the connectivity between the Master Controller (MC) for the client and the RADIUS server
.
Which settings can a Mobility Master (MM) deploy to Mobility Controllers (MCs) but master controllers CANNOT deploy to local controllers?
A. radio profiles
B. AAA profiles
C. Interface settings
D. WLAN settings
.
A network administrator sets up the Exam_Employees WLAN on an Aruba solution with a default role of guest, as shown in the exhibit. To which users does the guest role apply?
A. users who successfully authenticate and are assigned to the default role by the RADIUS server
B. users who successfully authenticate and are not assigned a different role by the RADIUS server
C. users who have connected to the SSID, but have not yet attempted authentication
D. users who fail authentication
.
Assume that administrators accept the default forwarding mode for WLANs. How does wireless user traffic flow in a master-local architecture, and how does it flow in a Mobility Master (MM) architecture? A. In the master-local architecture, all traffic is tunneled to the master controller to handle. In a MM architecture, all traffic is tunneled to the MM to handle.
B. In both architectures, APs forward corporate user traffic locally and tunnel guest user traffic to a Mobility Controller (MC) to handle.
C. In both architectures, traffic is tunneled to a Mobility Controller (MC) to handle.
D. In the master-local architecture, traffic is tunneled to a local Mobility Controller (MC) to handle. In a MM architecture, all traffic is tunneled to the MM to handle.
.
What describes the behavior for this WLAN?
A. APs in the default group broadcast the SSID. Clients can connect to the WLAN on APs in the default group only.
B. No APs broadcast the SSID. Clients cannot connect to the WLAN until administrators activate it.
C. No APs broadcast the SSID. Clients can connect to the WLAN on APs in the default gorup only.
D. APs in the default group broadcast the SSID. Clients can connect to the WLAN on APs in any group.
.
A company deploys a wireless network in a typical office environment with many surfaces where the signal can bounce. Which 802.11 technology uses the characteristics of this environment to increase wireless speeds?
A. Channel bonding
B. Multiple Input Multiple Output (MIMO)
C. Transmit Power Control (TPC)
D. QAM modulation
.
What is one difference between captive portal authentication and 802.1X authentication?
A. 802.1X authentication always authenticates the wireless client, while captive portal authentication always authenticates the wireless user.
B. 802.1X authentication occurs at Layer 2, while captive portal authentication occurs at Layer 3.
C. 802.1X authentication must use an LDAP server, while captive portal authentication can use a RADIUS server or an LDAP server.
D. 802.1X authentication is typically implemented without encryption, while captive authentication is often combined with WPA or WPA2.
.
A company has a single Aruba Mobility Master (MM)-based solution with two Mobility Controllers (MCs). Network administrators want APs in building 1 to support a WLAN but do not want APs in building 2 to support the WLAN.
How can administrator ensure that they can enforce this rule as they set up the WLAN in the Mobility Master (MM) Interface? A. Place APs in different buildings in different AP Groups.
B. Assign APs in different buildings to different MM nodes.
C. Configure APs in different buildings to use different frequency bands.
D. Assign different radio profiles to APs in different buildings.
.
A company has an Aruba solution. A network administrator wants to prevent wireless users from accessing shopping web sites with a bad reputation. What should the administrator set up to deny such traffic? A. an AppRF engine
B. application filters in the Traffic Analysis dashboard
C. firewall access control rules that specify HTTP and HTTPS services
D. firewall application rules
.
What does an Aruba Mobility Master (MM) do before it deploys a configuration to a Mobility Controller (MC)?
A. It encrypts the configuration to be deployed and backs it up to a secure archive.
B. It obtains the current configuration, encrypts it, and backs it up to a secure archive.
C. It synchronizes the configuration with templates on Aruba AirWave.
D. It removes any commands that are not supported on that MC or have dependency errors.
.
A network administrator needs to configure firewall rules for three roles:
Finance
Sales
Employee
Several rules apply to both the Employee and Sales roles, but not to the Finance role. What is the simplest way to configure these rules? A. Define the Employee and Sales roles as internal roles, and then configure the rules as global rules for internal users.
B. Apply these rules as a subnet-based policy, and then ensure that only Employee and Sales users are assigned IP addresses in that subnet.
C. Select either the Employee or Sales role, and then configure these rules within the global policy.
D. Create a policy with these rules, and then apply that policy to the Employee and Sales roles.
.
A network administrator wants to use unique digital certificates installed on user devices to authenticate wireless users. Which EAP method should the RADIUS server and clients support?
A. PEAP and MS-CHAPv2
B. EAP-TLS
C. EAP-TTLS and MS-CHAPv2
D. LEAP
.
Which type of authentication server should administrators select to authenticate users to a ClearPass server?
A. Windows
B. RADIUS
C. TACACS+
D. LDAP
.
A network administrator wants to implement MAC filtering for the wireless network of a local financial firm to ensure that only employees can access the wireless network. What is a potential weakness of this solution?
A. MAC filters cannot be applied with WPA2 encryption.
B. Authorized MAC addresses are visible in plaintext in the air and can be easily spoofed.
C. Many popular clients do not have the capability to connect to WLANs that use MAC filters.
D. MAC filters offer no protection against authorized users who try to connect unauthorized devices.
.
Which task can an Aruba Air Monitor (AM) perform?
A. Analyze wireless traffic patterns at the application level.
B. Optimize RF through the AP channel and transmit power plans.
C. Analyze RF signals to determine the cause of non-802.11 interference.
D. Help to detect rogue APs in the environment.
.
A network administratpr adds several new APs to an Aruba solution that uses AirMatch. The administrator does not want to change the channel for the existing APs, but wants the new APs to receive a provisional plan for their channels and power.
What should the administrator do to meet this goal? A. Run an on-demand quick AirMatch optimization.
B. Run an on-demand incremental AirMatch optimization.
C. Temporarily enable ARM on the existing and new APs, while AirMatch scheduling remains enabled.
D. Temporarily disable AirMatch scheduling, and then enable ARM on the existing and new APs.
.
What is the minimum space between channels in the 2.4GHz range to prevent overlap?
1 channel 3 channel 5 channel 7 channel.
A WLAN in an Aruba Mobility Master (MM)-based solution enforces Enterprise-WPA2 security and uses the tunnel forwarding mode. The company has an external RADIUS server.
Which device exchanges RADIUS packets with the RADIUS server? A. Mobility Controller (MC)
B. wireless client
C. access point (AP)
D. Mobility Master (MM)
.
A network administrator needs to create an Aruba firewall rule that permits wireless users to receive DHCP settings when they first connect to the Aruba solution.
What are the correct source and destination aliases for the rule? A. source = any and destination = user
B. source = any and destination = any
C. source = user and destination = user
D. source = user and destination = any
.
How can network administrators upgrade AirMatch on an Aruba Mobility Master (MM)?
A. Upgrade Client Match as part of a global software upgrade, and upgrade AirMatch separately as a loadable service module (LSM).
B. Upgrade AirMatch as part of a global software upgrade, and upgrade Client Match separately as a loadable service module (LSM).
C. Upgrade AirMatch and Client Match through a global software upgrade.
D. Upgrade Client Match and AirMacth separetely as a loadable service modules (LSMs).
.
What is a requirement for the Dashboard > Traffic Analysis window on the Aruba Mobility Master (MM) to show data?
A. Airmatch and ClientMatch must be enabled.
B. The solution must have active PEFNG licenses.
C. Firewall policies must include application filtering rules.
D. WLANs must use the decrypt-tunnel forwarding option.
.
the exhibit shows output from a Mobility Master (MM) dashboard. What is a valid reason for the administrator to click the akamai square under applications?
A. to create filter rules in order to control wireless user access to this application
B. to download a report about the usage of this application over time
C. to see more details about this application, such as a list of aggregated sessions
D. to see the break down for only roles, destinations, WLANs and devices that use this application
.
Network administrators need to set up a WLAN that uses WPA2 encryption and authenticates users with a preshared key (PSK) that is the same for all users. Administrators do not see where they should specify the option for the preshared key.
What should the administrators do? A. Click Personal in the slide bar.
B. Click the + icon in the Authentication server section
C. Return to the first page in the wizard and select the guest option
D. Configure an L3 authentication profile after the WLAN wizard is complete
.
What is a reason for a company to choose to deploy an Aruba 7024 Mobility Controller (MC) rather than an Aruba 7010 MC? A. to support 802.11ac Aps rather than only 802.11n APs
B. to support more wireless users
C. to support more POE devices directly connected to the MC
D. to support a faster firewall throughput rate
.
A company wants to provide wireless access for guests with their Aruba solution. Which configuration feature requires the customer to purchase PEFNG licenses?
A. redirection of guests to an external captive portal
B. provision of DHCP services to unauthenticated guests
C. addition of custom rules to control access for authenticated guests
D. customization of the internal captive portal login page
.
A company has an Aruba Mobility Master (MM)-based solution. A network administrator wants to collect and analyze information about clients and access points (APs) over extended periods of time.
What should the administrator do to achieve this goal? A. Add Aruba AirWave to the solution.
B. Run a Traffic Analysis report on the MM.
C. Make sure that MM has sufficient AppRF licenses.
D. Enable archival from the MM interface Maintenance windows.
.
An Aruba solution uses AirMatch with the default AirMatch profile settings. A network administrator sees that a scheduled optimization was completed, but a plan was not deployed.
Based on the exhibit, why did this occur? A. The cost of the new plan exceeds the amount allowed by the feature license
B. The new plan did not offer significantly improved quality
C. The solution uses master-local mode
D. ARM is disabled in the radio profile, so AP radios are considered frozen
.
|
