Practice PAY

In what customizing tabel do you group employees for use in personnel calculation rules (PCRs)?. V_001P_K. T503 / V_T503. T510. T554S.

Which activities must you configure before running payroll? Note: There are 2 correct answers to this questions. General payroll periods. Create control records. Set up absence valuation rules. Define work schedules.

What operation must you use to query an employee's personnel area in a personnel calculation rule (PCR)?. OUTWPPLANT. PAR. MOD. VWTCL.

Which processing class determines if a wage type should be considered for factoring?. Processing class 3. Processing class 6. Processing class 10. Processing class 20.

Which wage type do you use for cumulations?. 0010 – Basic Pay. /101 – Total Gross Amount. /559 – Net Pay Payment Amount. M020 – Overtime Time Wage Type.

How can you view the status of the payroll run?. By using the payroll period. By using the payroll area. By using the payroll control record. By using a payroll infotype.

Which functions use MODIF A to evaluate absences?. PAB. WPBP. P2001. RAB.

An employee reports an absence that spans several payroll periods. Where can SAP Payroll evaluate the absence using absence valuation? Note: There are 3 correct answers to this questions. On the working day in which the absence ends. In the payroll period in which the absence begins. In the working week in which the absence begins. On the actual dates in each affected payroll period. In the payroll period in which the absence ends.

What must you define in the attributes of a personnel calculation rule (PCR)? Note: There are 2 correct answers to this question. Processing class. Program class. Project assignment. Country grouping.

A vacation wage type is to be generated for an employee based on vacation. Which identifiers play an important role in Absence Valuation (v_T554C) in customizing?. MODIF W and the Day Rule. MODIF W and Absence Valuation Rule. MODIF 2 and Absence Valuation Rule. MODIF A and Absence Valuation Rule.

What is the result of the wage type in the output IT if it only runs through the following calculation rules: MULTI RAA and ADDWT?. Rate = 0, Number = 0, Amount = 130. Rate = 0, Number = 0, Amount = 0. Rate = 10, Number = 0, Amount = 130. Rate = 10, Number = 0, Amount = 0.

Which scenarios cause factoring to occur when they happen in the middle of a pay period? Note: There are 2 correct answers to this question. A different work schedule rule is assigned. An employee has a basic pay change. A new main bank record is created. An employee’s name is updated.

What function generates time wage types on the TIP table?. DAYMO. PIT. GWT. DAYPR.

In which payroll subschema are time wage types selected?. TC00 Time Data Processing, Wage Type Selection. XIN0 Initialization of Payroll (International). TM00 Time Evaluation With Clock Times. TM04 Time Evaluation Without Clock Times.

Which of the following personnel calculation rules does the system use in the subschema of XAL9 factoring and storage? Note: There are 2 correct answers to this question. X020. X015. XPPF. XVAL.

Which of the following rules are used to determine hourly rates for all employees? Note: There are 2 correct answers to this question. X010. X012. X013. X015.

Under what condition will a time wage type be selected using the rule shown in the attached graphic?. Only on working days that are not public holidays. Only on weekends. Only on public holidays. On all calendar days.

When processing a wage type, there is no requirement to differentiate between employee subgroup groupings. What value must you add in parameter 3 when function PIT calls the rule to process the wage type?. NOAB. No differentiation. Subgroup A. Subgroup B.

What is the name of the international subschema that is used to initialise payroll?. XINO. XAL0. TC00. XPP0.

You want to multiply wage type field rate and number in a calculation rule. The result should be in the amount field. The values in the rate and number fields should then be set to zero. Which arithmetic operations do you have to use?. MULTI ANR, ZERO = N, ZERO = A. ADDWT and SUB. DIV and CLEAR. MULTI and ADDWT.

You are working in an international accounting protocol of SAP with functions and tables. Which of the following is both a function and a table?. GENPS. COPY. WPBP. PIT.

In what order are the subschemas processed in the payroll main schema X000?. XT00 Gross remuneration (Time Management) → XBD0 Edit basic data → XAL9 Factoring and storage → XEND Final processing. XBD0 Edit basic data → XT00 Gross remuneration (Time Management) → XAL9 Factoring and storage → XEND Final processing. XEND Final processing → XBD0 Edit basic data → XT00 Gross remuneration (Time Management) → XAL9 Factoring and storage. BD0 Edit basic data → XAL9 Factoring and storage → XT00 Gross remuneration (Time Management) → XEND Final processing.

Which functions do you use to import infotypes data into the current payroll run? Note: There are 2 correct answers to this question. GENPS. WPBP. XPPF. PIT.

Which personnel calculation rule is used to determine the "Time Wage type selection group" (MODIFW)?. XMOD. XABZ. X006. X010.

Which wage type's can you use to calculate the hourly rate for salaried employees? Note: There are 2 correct answers to this question. Time wage types. /001 – Base Salary Cumulation. Bonus wage types. /002 – Additional Recurring Payments Cumulation.

In rule XPPF, what does operation PPPAR check? Note: There are 2 correct answers to this question. Work place basic pay splits. Employee entry or exit after period start. Current entry in arrears. Payments replaced.

What function do you use to select the time wage types for table DZL?. WPBP. OUTWPPLANT. GWT. PIT.

Which of the following values are allowed in parameter 2 for function PIT? Note: There are 2 correct answers to this question. NOAB. GEN. INF. PA.

You want to use rule Z123 to process only wage type 1200 in the results table (RT). The processing will differ for hourly and salary employees. How do you call the rule?. PIT Z123 1200. PIT Z123 1200 NOAB. PRT Z123 1200. PIT Z123 1200 IN.

What is the purpose of the GENAU constant in the standard payroll process?. It decreases the time for processing payroll. It increases the accuracy of rounding. It provides employee groupings for payroll. It removes redundancy from calculations.

What should be the status of payroll control record if you want to create live posting documents?. Released for payroll. Check payroll results. Released for correction. Exit payroll.

All wage types in the input table (IT) must be processed using personnel calculation rule Z123. In addition, you need to consider the employee subgroup grouping for the personnel calculation rule. What configuration should you set up to accomplish this?. Use PIT Z123 / GEN in the schema. Use PIT Z123 / NOAB in the schema. Use PRT Z123 in the schema. Assign wage type processing without any employee subgroup grouping.

What do you need to configure to valuate a time wage type using a wage-type-dependent constant?. Personnel calculation rule XMOD with MODIF A groupings. Personnel calculation rule XMOD with MODIF 2 groupings. Personnel calculation rule TMOD with MODIF W groupings. Personnel calculation rule TMOD with MODIF T groupings.

You want to use the possibilities of counting classes. Into which types can each counting class be classified? Note: There are 2 correct answers to this question. SA. KA. AU. AP.

Which of the following are processed before function MOD in subschema XT00? Note: There are 2 correct answers to this question. Function GENPS. Rule X010. Rule X015. Function AVERA.

What can be included in an average calculation rule? Note: There are 3 correct answers to this question. Cumulation rules. Function PARTT. Relevant average period. Final processing. Modifier groupings.

How can an HR administrator process payroll for an employee after the employee has left the organisation?. Extend the validity of Basic Pay Infotype (IT0008). Maintain Run payroll up to date on Payroll Status infotype (IT0003). Maintain the Earliest MD Change Date on the Payroll Status infotype (IT0003). Extend the validity of Payroll Status Infotype (IT0003).

How can you evaluate a wage type if it is configured to use constant valuation bases? Note: There are 3 correct answers to this question. Configure a varying amount based on employee group and employee subgroup. Configure a varying amount based on the hourly rate. Configure a varying amount based on pay scale group and pay scale level. Configure a varying amount based on an average rate. Assign a fixed amount.

What operation do you use to query the average working hours per pay period for each partial period in table PARTT?. TADVIP. GSDIVP. GADIVP. TSDIVP.

Which of the following infotypes are imported by function WPBP? Note: There are 3 correct answers to this question. 0008. 0007. 0015. 0001. 2001.

Which function is subschema XBDO (basic data) checks if all master data has been completely imported?. UPD. GON. ENAME. WPBP.

You want a basic wage type to be included in valuation basis /001 in order to determine an amount per hour. What processing class do you use to achieve that?. 10. 1. 15. 99.

What does operation ELIMI do in personnel calculation rule (PCR)?. It prepares wage types for accumulation. It adds up wage types. It sets the time period indicators. It divides two fields in the current entry and places the result in a third field.

With which operation can you transfer wage types to an internal table?. XINO. PIT. ADDWT. OUTWP.

What does function GEN/8 do?. Multiplies a wage type by 100.000 and writes the result to the rate (RTE) field. Divides a wage type by 100.000 and writes the result to the rate (RTE) field. Generates secondary wage types and writes them to the input table (IT) for each partial period. Generates a maximum of 8 secondary wage types and writes them to the input table (IT) for each partial period.

To include absence hours in the PARTA table, what must be defined in absence valuation rules?. Counting class. Day rule. As-if principle. Wage type.

You want to use a wage type in infotype 0008 that valuates your amounts indirectly from the pay scale table. Which module do you use for this?. SUMME. PRZNT. ARBPL. TARIF.

In which internal table can you find the cumulated time wage types?. IT. RT. PARTT. OT.

Which elements can you use to build wage type selection rules? Note: There are 2 correct answers to this question. XMOD grouping. Processing type. Work schedule rule. Conditions for the day.

Which of the following infotypes are evaluated for payroll factoring? Note: There are 3 correct answers to this question. Absence infotype (IT2001). Organisational Assignment infotype (IT0001). Bank Details infotypes (IT0009). Payroll Status infotypes (IT0003). Actions infotype (IT0000).

How many parameters can function DAYMO use?. 1. 2. 3. 4.

Which options can you use with function PIT to control wage type access in a personnel calculation rule (PCR)? Note: There are 2 correct answers to this question. GEN. NOAB. Pnn. ABART.

Which options do you have to assign a constant valuation basis to the time wage type? Note: There are 2 correct answers to this question. K. TG. 2. 1.

In which order can you carry out the payroll process?. Release Payroll, Start Payroll, Exit Payroll. Start Payroll, Release Payroll, Exit Payroll. Start Payroll, Check Result, Exit Payroll. Release Payroll, Start Payroll, Exit Payroll.

You want to calculate partial period factors including unpaid absences in work days for all counting classes. What variable do you use?. AAU**. SAP**. SAP02. KAU**.

Which secondary wage types are available for average calculation?. /840 to /1845. /201 to /232. /001 to /002. /801 to /816.

You are using operation ADDWTE*. Into which table will the wage type be transferred?. Output table (OT). Results table (RT). Working place basic pay table (WPBP). Time input table (TIP).

Which of the following is an executable payroll schema?. XT00. X000. X010. XPPF.

Which settings can limit the retrospective accounting depth of SAP payroll? Note: There are 3 correct answers to this question. The “Earliest personal retroactive accounting date” stored in the Payroll Status infotype (0003) for the personnel number. The hiring date stored for the personnel number. The “Earliest retroactive accounting period” in the Payroll control record. The start date of the current payroll period. The start date of the current data record for Basic Pay (infotype 8) for the personnel number.

Which calculation rule determines the valuation of wage type based on the cumulative average basis?. XVAL. XMOD. X018. X015.

You call up a main schema using transaction PE01 and you have several columns available in the editor. What are the names of these columns? Note: There are 3 correct answers to this question. Line. Parameter. Feature. Return Code. Function.

What transaction do you use to create a new personnel calculation rule?. PE01. PE30. PA03. PE02.

Which of the following are applicable to retroactive accounting? Note: There are 2 correct answers to this question. A change to master data that is relevant for payroll in the current period automatically leads to retroactive accounting. Every change to customizing data that is relevant for payroll leads to retroactive accounting. You can use the “Forced retro.accounting” data field to trigger a forced retroactive accounting. Every customizing change in the past automatically leads to retroactive accounting when you start payroll.

Which tables can you find in the PC_PAYRESULT transaction? Note: There are 2 correct answers to this question. Internal Table (IT). Output Table (OT). Results Table (RT). Bank Transfer (BT).

Which variable do you use to import and employee's actual planned working time for each partial period?. KDIVP | ADIVP | SDIVP. KSOLL | ASOLL | SSOLL. KDIVI | ADIVI | SDIVI. KAU** | AAU** | SAU**.

What condition can be included on and adjustment rule for averages?. Cumulation rule. Time unit. PCR for average formula. Average bases.

In addition to the fixed values from SAP, you want to use customer-specific values of the "Employee subgroup grouping for personnel calculation rule" in your personnel calculation rules. What rules can you use for this?. 5 to 9. 00 to 99. 1 to 3. 1 to 4.

What is the purpose of the Payroll Status infotype (IT0003)?. To determine the assigned current payroll period. To control an employee’s assignment to a payroll area. To determine the assigned payroll schema. To control the retroactivity of an employee’s time evaluation and payroll runs.

Which of the following can be queried using operation OUTWP? Note: There are 3 correct answers to this question. Cost centres. Infotypes. Wage types. Pay scales. Personnel areas.

You want to calculate wage types /801 and /802. Which personnel calculation rules ar accessed by XPPF?. XPP1 and XCH0. XPP0 and XVAL. XPP0 and XPP1. XCH0 and XVAL.

You changed the Organisational Assignment infotype (IT0001) after a productive payroll run. What happens in the next payroll run?. An error message is displayed. The payroll processes normally. A payroll retrospective calculation occurs. A warning message is displayed.

What modifier do you use to group employees for constant valuation (V_T510J) in rule XMOD?. MODIF T. MODIF D. MODIF 1. MODIF 2.

You want to propose a default value for the pay scale type and pay scale area (IT 0008) data fields. How can you achieve this?. Use table V_503_G. Use table V_T510. Use the LGMST feature. Use the table V_001P.

Some personnel number in payroll are rejected while others are subject to master data changes in the correction phase. How does the system recalculate these personnel numbers' payroll results in the next payroll run?. The personnel numbers are saved in table V_T549A. Matchcode R is set for these employees. Matchcode W is set for these employees. The indicator is set in infotype 0003.

What does operation MULTI RAA do?. Multiply the wage type being processed by the amount in the rate field. Multiply the wage type being processed by double the amount in the rate field. Multiply the value of the rate field by the value of the amount field and store the result in the amount field. Multiply the value of the rate field by the value of the amount field and store the result in the rate field.

Which function/parameter combination must you activate in a productive payroll schema?. OPT/INFT. OPT/TIME. PGM/ABR. CHECK/ABR.

Where do you define the time/measurement unit for a wage type?. Time wage type selection. Wage type characteristics. Base wage type valuation.

Which of the following are attributes of a schema? Note: There are 2 correct answers to this question. Program class. Processing class. Country grouping. Structure.

Which function does the new average processing perform?. PIT X015 GEN. X016. MEANW. AVERA.

Which operations would you use in a personnel calculation rule (PCR) called by function PIT to reduce the amount of a wage type by 10% and also retain it for further processing?. AMT 0.90 ADDWT*. AMT* 0.90 ADDWTI. AMT 0.10 ADDWT*. AMT 0.10 ADDWTI*.