testknow

What functionality is available with Basic Shipping in SAP S/4HANA Supply Chain for transportation management? Note: There are 3 correct answers to this question. Transportation planning based on inbound deliveries. Transportation planning based on outbound deliveries. Transportation planning based on forwarding orders. Transportation execution without event management.

You want to ensure that the system interprets rates from a rate table as percentages. Where do you have to set the percentage indicator? Note: There are 2 correct answers to this question. Calculation sheet. Scale. Calculation profile. Rate table.

You want to perform carrier selection for a freight order created in SAP S/4HANA Supply Chain for transportation management. Which of the following can you use as decision criteria? Note: There are 2 correct answers to this question. Costs from charge management. Priority from carrier selection settings. Priority from transportation lane. Costs from shipment cost document.

What is the maximum number of freight settlement documents that can be created from a freight order with two deliveries during its lifecycle, given that all the charge elements in the calculation sheet have a value greater than zero?. 2. 3. 1. No limit.

Which of the following are some of the process steps in the strategic freight procurement process? Note: There are 3 correct answers to this question. Evaluate responses and optimize. Define trade lanes. Generate business shares. Generate freight agreements. Prepare request for quotation (RFQ).

In which object can you track and trace the whole journey of your goods, if the whole journey has multiple transportation stages?. Freight order. Freight booking. Consignment order. Freight unit.

In which SAP Fiori apps can you define whether business shares are considered in the carrier selection process? Note: There are 2 correct answers to this question. Edit Carrier Selection Settings. Create Business Share. Define Transportation Lane. Edit Freight Agreement.

When using dispute management, which activities can a carrier perform in SAP Business Network for Logistics? Note: There are 2 correct answers to this question. Add a detention charge. Change a charge line's calculation base. Upload files. Change the document currency.

Which documents are created in materials management when you transfer a freight settlement document from transportation management to materials management when cost distribution is NOT enabled? Note: There are 2 correct answers to this question. Purchase order. Service entry sheet. Carrier invoice. Settlement management document.

The following settings are defined for a freight order from location A to location B with two freight units: The distance between locations A and B in the transportation lane is 1500 km, the duration is 19 hours, and the Fix Transportation Duration flag is set. The average speed for the means of transport is defined as 100 km/h and the GIS quality flag is NOT set. Loading and unloading of each freight unit at locations A and B is defined as 1 hour. The vehicle resource is available weekdays from 8:00 am to 8:00 pm. Loading starts on Monday at 8:30 am. When is unloading finished?. Tuesday 7:30 pm. Tuesday 7:30 am. Tuesday 5:30 pm. Tuesday 6:30 pm.

Which of the following incompatibility types can you use in the Automatic and Manual Planning incompatibility area? Note: There are 2 correct answers to this question. Freight unit - Freight booking. Carrier - Transportation order. Vehicle resource - Location (stay level). Transportation request header - Transportation request header.

A carrier has responded to your request for quotation but was NOT automatically assigned to the freight order. What could be reasons for this? Note: There are 2 correct answers to this question. The program to evaluate freight quotations was NOT executed. The carrier responded after the response time had expired. The tendering process was set to "Direct Tendering - Send Freight Order Directly". The tendering profile contains a subsequent step.

You want to avoid dependency on a single carrier. Which object should you define to balance the load across multiple carriers? Incompatibility Condition Transportation allocation Business share. Incompatibility. Condition. Transportation allocation. Business share.

You want to increase the rates of a rate table by 3 percent for a specific source country using the Mass Update function. What must you specify in the Update Rates function?. Scale item. Rounding profile. Scale range. Currency.

To which of the following can you assign a dimensional weight profile?. Calculation profile. Calculation base. Charge type. Charges profile.

From which of the following transportation management documents can you trigger integration to SAP Extended Warehouse Management?. Freight unit. Package unit. Consignment order. Freight order.

You have fixed-price contracts with your carriers. The carriers have guaranteed availability for all of your transports. How can you streamline the subcontracting process?. Use carrier selection with the Automatic Tendering option. Use carrier selection with the Assign Best Carrier option. Use tendering with the Broadcast Tendering - First Acceptable Offer type. Use tendering with the Peer-to-Peer Tendering - No Response Required type.

You want to set up charge calculation for freight orders. Valid charges should consist of a base charge based on the distance and gross weight of the freight order, and a supplemental charge per container that is included in the freight order. Multiple containers are allowed for each freight order, and the charge is based on the container type. The container type can be small, medium, or large. What is the minimum number of charge lines with instruction type "standard" that you must set up?. 2. 1. 3. 0.

Assuming an agreement determination condition is NOT used, which of the following involved parties determine the correct freight agreement for charge calculation in a freight order? Note: There are 2 correct answers to this question. Ordering party. Carrier. Purchasing organization. Executing carrier.

You want to use advanced shipping and receiving. What must you define? Note: There are 2 correct answers to this question. Location with type 1011 (vendor). Location with type 1001 (production plant). Location with type 1200 (loading point). Location with type 1003 (shipping point).

A carrier has an agreement with a shipper that starts on January 1 for fuel price as 5% of the base freight. The fuel surcharge is pegged to the current price of 3 USD a gallon. The fuel surcharge can change proportionally based on the fuel price on the calculation date. How will you define fuel surcharge calculation in transportation management? Note: There are 2 correct answers to this question. Use a determination rule for the index rate table. Use an index table for the fuel surcharge charge item. Use a rate table for the fuel surcharge with calculation date as a scale. Use the rating amount or a standard rate table for the fuel surcharge.

You create a freight agreement request for quotation (RFQ) master with seven RFQ items. Carrier A is NOT incumbent for three items and is removed from those items. Four other carriers are assigned to this freight agreement RFQ master. You generate the individual freight agreement RFQs. How many individual freight agreement RFQs are created for carrier A?. 1. 4. 7. 3.

Based on your company policy, the hazardous product POISON should NOT be transported on means of transport TRUCK unless authorized by user A. How can you maintain the system reaction in the corresponding incompatibility definition used by user A? Note: There are 2 correct answers to this question. Automatic Violation: Incompatibility Must Not Be Violated Manual Violation: Incompatibility Must Not Be Violated. Automatic Violation: Incompatibility Must Not Be Violated Manual Violation: Incompatibility is Ignored. Automatic Violation: Incompatibility Must Not Be Violated Manual Violation: Warning If Incompatibility Is Violated. Automatic Violation: Incompatibility Is Ignored Manual Violation: Warning If Incompatibility Is Violated.

Which of the following profiles is directly assigned to an organizational unit?. Calculation profile. Dimensional weight profile. Charges profile. Distribution profile.

You want to use destination-based distance costs when planning freight orders with the VSR optimizer. What MUST you define?. A freight unit building rule that does NOT use default routes. Costs for distance in the transportation lane. Planning strategy VSR_DEF in the optimizer settings. Costs for distance in the constraints and cost settings.

You have defined the transportation zone hierarchy and means of transport hierarchy as shown in the screenshot. Transportation lanes have been defined for all means of transport between all transportation zones. Five allocations have been defined: Orientation: Within; From: 1; To: 1; Means of transport: B Orientation: Within; From: 1; To: 1; Means of transport: A Orientation: Along; From: 2; To: 3; Means of transport: B Orientation: Along; From: 4; To: 2; Means of transport: A Orientation: Along; From: 4; To: 5; Means of transport: C Which allocations are consumed by a freight order with means of transport B from transportation zone 4 to transportation zone 5? Note: There are 3 correct answers to this question. Orientation: Along; From: 2; To: 3; Means of transport: B. Orientation: Along; From: 4; To: 5; Means of transport: C. Orientation: Along; From: 4; To: 2; Means of transport: A. Orientation: Within; From: 1; To: 1; Means of transport: A. Orientation: Within; From: 1; To: 1; Means of transport: B.

In which of the following areas can you use incompatibilities? Note: There are 3 correct answers to this question. Charge calculation. Tendering. Delivery proposal. Freight unit building. Carrier selection.

Where can you initiate carrier selection? Note: There are 2 correct answers to this question. From the container unit user interface. From SAP Business Network for Logistics. From report/SCMTMS/PLN_OPT. From the freight booking user interface.

To which document type would you assign the event profile to calculate event-based charges in a rail transport?. Freight unit. Transportation unit. Freight order. Freight booking.

You add an assessorial charge to a freight order after the freight settlement document (FSD) has been posted and accruals have been booked in materials management. The background report to create FSDs determines change strategy "Reverse and Repost with new FSD" for this freight order. What will you see in transportation management and materials management? Note: There are 2 correct answers to this question. 1 purchase order in materials management. 3 FSDs in transportation management. 2 FSDs and 1 credit memo in transportation management. 3 service entry sheets in materials management.

Which of the following can you determine using conditions in transportation charge management? Note: There are 2 correct answers to this question. Validity date of the rate table. Rate table. Freight agreement. Carrier in the freight agreement.

You are implementing a side-by-side scenario integrating sales orders and outbound deliveries to transportation management. Sales order integration has created 30 freight units for 1 sales order (1 freight unit per sales order item). During planning, the freight units were assigned to 3 trucks (10 freight units or each truck). Based on this planning result, delivery creation is triggered. During packaging, up to 3 items can be packed into 1 case. What is the minimum number of freight units that exist in transportation management at the end of this process?. 6. 10. 12. 3.

You want to plan transports with driver assignment. Where can you assign a driver? Note: There are 2 correct answers to this question. Freight order. Vehicle resource. Transportation lane. Freight booking.

A discrepancy is configured with tolerance and blocking. Which of the following blocks are set when a discrepancy outside the configured tolerance is reported for a freight order? Note: There are 3 correct answers to this question. An invoicing block for the freight order A planning block for the freight order An execution block for the freight order An invoicing block for the freight unit An execution block for the freight unit. An invoicing block for the freight order. A planning block for the freight order. An execution block for the freight order. An invoicing block for the freight unit. An execution block for the freight unit.

In a side-by-side scenario, which of the following objects can you map from transportation management (TM) to materials management (MM)? Note: There are 2 correct answers to this question. TM charge type to MM service master. TM charge type to MM service material group. TM charge category to MM G/L account. TM purchasing organization to MM purchasing organization.

You want to print a road waybill document, a loading list, and labels for your freight orders with freight order type FOT1. You also want to send emails and XML messages to the carriers of freight orders of this type. What is the MINIMUM number of PPF (Post-Processing Framework) action profiles that you need to define for this purpose?. 3. 4. 2. 1.

You want to ensure that the system interprets rates from a rate table as percentages. Where do you have to set the percentage indicator? Note: There are 2 correct answers to this question. Scale. Calculation sheet. Rate table. Calculation profile.

You want to make sure that a particular forwarding house is entered as the ordering party in a freight order based on the ID of the consignee. What do you have to define in Customizing for the freight order type? Partner determination profile Shipper/consignee determination Organizational unit determination condition Creation strategy. Partner determination profile. Shipper/consignee determination. Organizational unit determination condition. Creation strategy.

You are using direct shipment options. How can you determine the freight order type when you are converting a freight unit to a freight order? Note: There are 2 correct answers to this question. Based on the freight order type defined in the freight unit type. Based on the freight order type maintained in a condition in the planning profile. Based on the default freight order type. Based on the freight order type in the freight unit building rule.

What business documents (objects) can be used as a base for track and trace functionality in transportation management? Note: There are 2 correct answers to this question. Freight order. Forwarding order. Service order. Resource.

You have completed the configuration tasks for cost distribution and freight settlement in transportation management and materials management. The settlement documents were successfully posted. Which of the following business documents would you check to verify that the amounts and postings are correct? Note: There are 2 correct answers to this question. Forwarding settlement document. Shipment cost document. Settlement management document. Service entry sheet.

You are planning to use Package Builder to estimate freight volume more accurately for better capacity planning. On what criteria can you base the definition of the package type assignment? Note: There are 2 correct answers to this question. Business partner. Handling unit type. Shipping type. Shipping location.

Your customer wants to use the cost distribution function to include transportation costs in the material valuation. Which of the following documents can support this requirement? Note: There are 3 correct answers to this question. Purchase order Outbound delivery Sales order Inbound delivery Stock transport order. Purchase order. Outbound delivery. Sales order. Inbound delivery. Stock transport order.

Which of the following can be used as origin of condition? Note: There are 2 correct answers to this question. Determination class Direct business object access Data crawler BRFplus decision table. Determination class. Direct business object access. Data crawler. BRFplus decision table.

What happens if you unassign a freight unit that has blocked a freight order because of a discrepancy? The block remains on the freight order but is removed from the freight unit. The block is removed from both the freight unit and the freight order. The block remains on the freight unit and the freight order. The block remains on the freight unit but is removed from the freight order. The block remains on the freight order but is removed from the freight unit. The block is removed from both the freight unit and the freight order. The block remains on the freight unit and the freight order. The block remains on the freight unit but is removed from the freight order.

Which transactions can you use to run the path finder? Note: There are 2 correct answers to this question. Carrier selection Explanation tool Transportation network cockpit Edit freight order. Carrier selection. Explanation tool. Transportation network cockpit. Edit freight order.

Which of the following driver management settings are maintained in freight order customization? Default driver Default truck handling Number of required drivers Home location. Default truck handling. Number of required drivers. Default driver. Home location.

Which of the following are features of the transportation cockpit? Note: There are 3 correct answers to this question. Command line Gantt chart Cost determination Distance calculation Multiple screens. Command line. Gantt chart. Cost determination. Distance calculation. Multiple screens.

In an embedded transportation management implementation, what are some possible predecessor documents to a freight order? Note: There are 2 correct answers to this question. Freight unit. Sales order. Order-based transportation requirement. Shipment.

In the logistics integration profile, the Incoterm location stage building is set to "Source location to Incoterm location- type 1". You create a sales order in which you specify an Incoterm and Incoterm location. What will be the result of these settings?. Two stages created: An active stage from the source location to the Incoterm location, and an additional non-planning-relevant stage from the Incoterm location to the destination location. One stage created: An active stage from the Incoterm location to the destination location. One stage created: An active stage from the source location to the Incoterm location. Two stages created: An active stage from the Incoterm location to the destination location, and an additional non-planning-relevant stage from the source location to the Incoterm location.

What settings are controlled by the freight unit type? Note: There are 3 correct answers to this question. Freight unit building rule Direct shipment options Organizational unit determination Change controller settings Tendering settings. Freight unit building rule. Direct shipment options. Organizational unit determination. Change controller settings. Tendering settings.

You want to configure a scenario in which a single trailer will be hauled by more than one truck. Which of the following must you customize? Note: There are 2 correct answers to this question. Freight order type Transportation unit type Freight booking type. Freight order type. Transportation unit type. Freight booking type. Forwarding order type.

To which of the following document types can you assign change controller strategies? Note: There are 2 correct answers to this question. Forwarding order. Order-based transportation requirement. Service order. Freight order.

You have defined the transportation zone hierarchy shown in the attached screenshot. Which transportation lanes can you use to transport from transportation zone 5 to transportation zone 3? Note: There are 3 correct answers to this question. 1->3. 2->6. 4->3. 1->1.

You are a consultant on an SAP S/4HANA Cloud brownfield project. In a meeting the customer decides to remodel an existing business process in accordance with clean core principles. Which of the following SAP Signavio solutions can be used for the remodeling?. SAP Signavio Process Intelligence. SAP Signavio Process Manager. SAP Signavio Process Insights. SAP Signavio Process Governance.

Which of the following can you use to determine a stage sequence in a forwarding order? Note: There are 2 correct answers to this question. Stage type. Stage profile. Movement type. Shipping type.

How can you create a schedule departure? Note: There are 2 correct answers to this question. Upload via report. Copy from a freight booking. Maintain in default route. Generate from a rule.

You want to optimize the load that you have planned for one of your trucks. From which of the following can you start the load planning function? Note: There are 2 correct answers to this question. Vehicle resource. Transportation cockpit. Freight order. Freight booking.

What are some SAP recommended guiding principles to achieve clean core operations? Note: There are 3 correct answers to this question. Establish regular housekeeping tasks and procedures. Define roles and responsibilities as part of a process transformation office. Integrate clean core practices in the end-to-end value process chain. Establish release management. Establish an organizational structure, technical foundation, and transformation methodology for clean core.

What functionality is available with Basic Shipping in SAP S/4HANA Supply Chain for transportation management? Note: There are 3 correct answers to this question. Transportation planning based on forwarding orders. Transportation execution without event management. Transportation planning based on sales orders. Transportation planning based on inbound deliveries. Transportation planning based on outbound deliveries.

Which item category in a forwarding order item hierarchy is NOT considered in subsequent execution documents?. Package. Product. Service. Passive vehicle.

Which attributes can you directly define in a schedule? Note: There are 2 correct answers to this question. Capacity. Transportation lane. Carrier. Downtimes.

Which of the following resources can be used to represent a capacity? Note: There are 2 correct answers to this question. Calendar resource. Handling resource. Equipment types. Transportation unit resource.

On which of the following documents can you calculate profitability?. Consignment order. Forwarding order. Forwarding quotation. Freight order.

To which of the following can you assign instruction sets? Note: There are 2 correct answers to this question. Stage type. Movement type. Forwarding order type. Freight order type.

Which of the following API types does SAP recommend to use to achieve clean core integrations? Note: There are 2 correct answers to this question. SOAP. IDoc. OData. RFC.

Which of the following attributes are used to define a business partner with role Driver? Note: There are 2 correct answers to this question. Fixed assignment to a vehicle resource. Non-working times and absences. Planning profile. Validity period.

Which of the following configuration settings can be used to automatically assign business partners? Note: There are 2 correct answers to this question. Freight unit type. Partner function. Business function. Freight order type.

Which of the following are functions of a consignment order? Note: There are 2 correct answers to this question. Subcontracting. Load planning. Charge calculation. Tendering.

In a shipper-to-logistics service provider (LSP) B2B scenario, both parties are using SAP Transportation Management. The LSP will plan and execute transportation for the shipper. Which documents are involved? Note: There are 2 correct answers to this question. Shipper's freight unit. Shipper's freight unit. LSP's service order. LSP's forwarding quotation. Shipper's freight order.

For which of the following documents is it possible to do forward and backward scheduling in the transportation cockpit?. Forwarding order. Freight unit. Sales order. Freight order.

Which type of order represents a logical grouping and is used in communication between shippers and consignees?. Sales order. Freight order. Service order. Consignment order.

You are a consultant on an SAP S/4HANA Cloud Greenfield project. Which of the following aspects should you focus on to achieve and maintain clean core data quality? Note: There are 2 correct answers to this question. Efficiency. Timeliness. Stability. Accuracy.

What can you directly enter in the forwarding order to specify how transportation is to be carried out? Note: There are 2 correct answers to this question. Shipping type. Instruction set. Stage profile. Movement type.

You need to plan freight units with multiple stages. In which master data object would you define different carriers for the different stages of your freight units?. Transportation lane. Default route. Schedule. Carrier profile.

In a side-by-side deployment between SAP S/4HANA and transportation management in SAP S/4 HANA, which interface is used to transfer business partner, product, and location master data?. Intermediate document (IDoc). Data replication framework (DRF). Core interface (CIF). Web service (WS).

You define an incompatibility to prevent two products from being shipped together. Which incompatibility validity area will you use?. Automatic Planning and Manual Planning. Carrier Selection. Delivery Proposal. Freight Unit Building.

How can you limit the number of columns that are displayed in a forwarding order worklist?. Define a new query. Apply a filter. Define a new view. Define a new page layout.

You are using SAP S/4HANA without geographical services. How can you determine the geographical coordinates for a location? Note: There are 2 correct answers to this question. The location coordinates cannot be determined. The location coordinates are determined at street level. The location coordinates are determined based on manual entry. The location coordinates are determined at region or country level.

You have two sales orders with three items each for the same customer with the same delivery date. No incompatibilities exist. The following customizing settings are defined: Build freight units automatically Freight unit building rule strategy is "consolidate as much as possible" What is the minimum number of freight units that are created?. 3. 6. 2. 1.

Which of the following characteristics describe transportation zones? Note: There are 2 correct answers to this question. Transportation zones increase the effort needed to model the network. Transportation zones transfer their properties to their locations. Transportation zones are used to group locations. Transportation zones are physical locations.

Your company operates its own fleet of trucks. One part of your planning process is the assignment of drivers. To which of the following can you assign drivers in the transportation cockpit? Note: There are 2 correct answers to this question. Freight order header. Freight unit header. Vehicle resource. Freight order stage.