CREATE TEST

ERASED TEST, YOU MAY BE INTERESTED ON Aruba Campus Access Professional - part 5

COMMENTS	STATISTICS	RECORDS

TAKE THE TEST

Title of test: Aruba Campus Access Professional - part 5 Description: Aruba Campus Author: Gerti Other tests from this author Creation Date: 11/12/2024 Category: Others Number of questions: 25

Share the Test:

New Comment

No comments about this test.

Content:

You are doing tests in your lab and with the following equipment specifications: * AP1 has a radio that generates a 20 dBm signal * AP2 has a radio that generates a 8 dBm signal * AP1 has an antenna with a gain of 7 dBI. * AP2 has an antenna with a gain of 12 dBI. * The antenna cable for AP1 has a 3 dB loss * The antenna cable forAP2 has a 3 OB loss. What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for AP1? A. 2dBm B. 8 dBm C. 22 dBm D. 24 dBm. A client is connecting to 802.1X SSID that has been configured in tunnel mode with the default AP- group settings. After receiving Access-Accept from the RADIUS server, the Aruba Gateway will send Access-Accept to the AP through which tunnel? A. IPsec tunnel B. Split tunnel C. GRE tunnel D. PAR tunnel. You must ensure the HPE Aruba network you are configuring for a client is capable of plug-and-play provisioning of access points. What enables this capability? A. UCC Service B. LLDP-MED C. SRTP D. CSMA. How is Dynamic Multicast Optimization (DMO) implemented in an HPE Aruba wireless network? DMO is configured individually tor each SSID in use in the network. The AP uses OOS to provide equal air time for multicast traffic, DMO is configured globally for each SSID in use in the network. The controller converts multicast streams into unicast streams. A. DMO is configured individually for each SSID in use in the network. B. The AP does not use QoS to provide equal air time for multicast traffic. QoS is a feature that prioritizes different types of traffic based on their importance and latency sensitivity. QoS does not affect how multicast streams are transmitted over the wireless link. C. DMO is not configured globally for each SSID in use in the network. DMO is configured individually for each SSID, as different SSIDs may have different multicast requirements. D. The controller does not convert multicast streams into unicast streams. The AP does the conversion, as it is closer to the wireless clients and can optimize the transmission based on the client capabilities and channel conditions. A customer wants to deploy a Gateway and take advantage of all the SD-WAN features. Which persona role option should be selected? A. ArubaOS 10 Branch B. ArubaOS 10 VPN Concentrator C. ArubaOS 10 Wireless D. ArubaOS 10 Mobility. You need to have different routing-table requirements With Aruba CX 6300 VSF configuration. Assuming the correct layer-2 VLAN already exists, how would you create a new SVI for a separate routing table? A. create a new VLAN, and attach the VRF to it. B. Create a new routing table, and attach VLANS to it C. Create a new SVI and use attach command. D. Create a new VLAN. and attach the routing table to it. You are are doing tests in your lab and with the following equipment specifications: * AP1 has a radio that generates a 16 dBm signal. * AP2 has a radio that generates a 13 dBm signal. * AP1 has an antenna with a gain of 8 dBi. * AP2 has an antenna with a gain of 12 dBi. * The antenna cable for AP1 has a 4 dB loss. * The antenna cable for AP2 has a 3 dB loss. What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for AP1? A. -9 dBm B. 20 dBm C. 40 dBm D. 15 dBm. Refer to Exhibit: With Access-1, What needs to be identically configured With MSTP to load-balance VLANS? A. Spanning-tree bpdu-guard setting B. Spanning-tree instance vlan mapppjng C. spanning-tree Cist mapping D. Spanning-tree root-guard setting. With the Aruba CX switch configuration, what is the Active Gateway feature that is used for and is unique to VSX configuration? A. VRRP and Active gateway are mutually exclusive on a VLAN B. VRID is set automatically as SVI vlan id C. VRIDs need to be non-overlapping with VRRP D. VRRP and Active Gateway can be configured on a single VLAN for interoperability. Your manufacturing client is deploying two hundred wireless IP cameras and fifty headless scanners in their warehouse. These new devices do not support 802.1X authentication. How can HPE Aruba enhance security for these new IP cameras in this environment? A. Use MPSK Local to automatically provide unique pre-shared Keys for devices. B. Aruba ClearPass performs the 802.1X authentication and installs a certificate. C. MPSK provides for each device in the WLAN to have its own unique pre-shared Key. D. MPSK Local will allow the cameras to share a rey and the scanners to share a different. With the Aruba CX 6100 48G switch with uplinks of 1/1/47 and 1/1/48. How do you automate the process of resuming the port operational state once a loop on a client port is cleared? A. Configure int 1/1/1-1/1/52 loop-protect disable timer. B. Configure global loop-protect disable timer. C. Configure int 1/1/1-1/1/46 loop-protect re-enable-timer. D. Configure global loop-protect re-enable-timer. Your customer currently has Iwo (2) 5406 modular switches with MSTP configured as their core switches. You are proposing a new solution. What would you explain regarding the Aruba CX VSX switch pair when the Primary VSX node is replaced and the system MAC is replaced? A. VSX will select the MAC address from a node that is the lower ID. B. Configure vMAC on the Primary VSX node under VSX to retain MAC after hardware replacement. C. VSX will select the MAC address from a node that is a higher ID. D. During the initial VSX configuration, the system-mac is assigned with a fixed MAC based on VSX ID. You are building a configuration in Central that will be used for a standardized network design for small sites for your company, you want to use GUI configuration for gateways and Aps, while template configuration for switches. You need to align with Aruba best practices. Which set of actions will satisfy these requirements? A. Create one group in Central for switches a second group for APs. and a third group for gateways. Create a unique site for each location, and assign devices to the appropriate site. B. Create one group in Central for switches and a second group for APs and gateways. Create a unique site for each location, and assign devices to the appropriate site. C. Create a single group in Central. Create a unique site for each location, and assign devices to the appropriate site. D. Create a single group in Central. Create a unique site for each type of device, and assign devices to the appropriate site. With the Aruba CX 6000 24G switch with uplinks of 1/1/25 and what does the switch do when a client port detects a loop and the do-not-disabie parameter is used? A. Port status will be validated once status is cleared B. An event log message is created. C. The network analytics engine is triggered. D. Port status led blinks in amber with 100hz. With the Aruba CX switch configuration, what is the Active Gateway feature that is used for and is unique to VSX configuration? A. Sixteen different VMACs are supported total as shared. B. Active Gateway can once MSTP instances are created for VLAN load sharing. C. Sixteen different VMACS are supported for each IPV4 and IPV6 stack simultaneously. D. copied over the ISL link for an optimized path. What is used to retrieve data stored in a Management Information Base (MIS)? A. SNMPv3 B. DSCP C. TLV D. CDP. Your Director of Security asks you to assign AOS-CX switch management roles to new employees based on their specific job requirements. After the configuration was complete, it was noted that a user assigned with the auditors role did not have the appropriate level of access on the switch. The user was not allowed to perform firmware upgrades and a privilege level of 15 was not assigned to their role. Which default management role should have been assigned for the user? A. sysadmin B. sysops C. administrators D. config. Your customer has asked you to assign a switch management role for a new user. The customer requires the user role to View switch configuration information and have access to the PUT and POST meth0ds for REST API. Which default AOS-CX user role meets these requirements? A. administrators B. auditors C. sysops D. helpdesk. Which standard supported by some Aruba APs can enable a customer to accurately locate wireless client devices within a few meters? A. 802.11mc B. 802.11W C. 802.11k D. 802.11r. What protocol should be configured to ensure redundancy for access switches in an Aruba-based network that lacks physical stacking capabilities? A. OSPF B. VRRP C. MSTP D. LACP. Which of the following is NOT a feature of Aruba's Virtual Switching Extension (VSX)? A. Dual active gateway capability B. Live upgrades without impacting network performance C. Ability to function without ArubaOS-CX D. Support for split and merge scenarios. What is the primary purpose of implementing Aruba's Dynamic Segmentation? A. To segregate network traffic based on VLAN IDs B. To provide robust network security at the edge C. To apply user roles dynamically across wired and wireless networks D. To reduce the complexity of VLAN configurations. In ArubaOS-CX, which command enables the exporting of sFlow samples to an external collector? A. sflow collector B. sflow enable C. mirror session D. flow export. You need to configure an ACL on an Aruba switch to block HTTP traffic but allow HTTPS. Which of the following ACL rules accomplishes this? A. permit tcp any any eq 443; deny tcp any any eq 80 B. deny tcp any any eq 80; permit tcp any any eq 443 C. deny tcp any any eq 443; permit tcp any any eq 80 D. permit tcp any any neq 80. Which statement about Aruba ClearPass Policy Manager is correct? A. It is primarily used for device firmware management. B. It serves as a gateway for all network traffic. C. It provides network access control and policy management. D. It only supports wireless authentication protocols.

Report abuse