ccna - basics (and a bit of ccnp to boot)

VLANs are logically independent network organizations built using the resources of layer 2 of the OSI model. Currently, the IEEE 802.1q protocol is widely used to build VLANs, which adds a field with a length, in bits, of. 8. 24. 4. 32. 16.

When implementing a new Campus, the IFPE network administrator will have to separate traffic from different sectors using VLANs and a different address range will be used for each network. Using the address 10.25.0.0, what are, respectively, the network, broadcast and subnet mask addresses that will be used for the laboratory network (with 510 hosts)?. 10.25.0.0/23, 10.25.1.255, 255.255.254.0. 10.25.0.1/23, 10.25.0.255, 255.255.254.0. 10.25.0.0/23, 10.25.1.255, 255.255.255.0. 10.25.0.1/24, 10.25.1.255, 255.255.255.0. 10.25.0.0/24, 10.25.0.255, 255.255.255.0.

Knowing that VLANs were not configured on the SWITCH, the topology presents. 1 collision domain and broadcast domains. 1 collision domain and 1 broadcast domain. 1 collision domain and 2 broadcast domains. 2 collision domains and 1 broadcast domain. 2 collision domains and 2 broadcast domains.

When using an access restriction policy with NAC, a quarantine VLAN is used as a restricted access location, where a given client must be inserted to apply a security patch or update antivirus software, before actually joining the computer network. true. false.

What is the maximum number of VLANs on a given Ethernet network, according to the IEEE 802.1Q specification?. 2046. 2048. 4094. 8190. 8192.

Based on the process mentioned above, select the correct alternative. Port 20 was configured as the access port for VLAN 2. Ports 0 to 10 are in the same broadcast domain. VLAN 2 was replaced by vlan-cgp. Ports defined in the range 0 to 20 are trunk ports.