CREATE TEST

ERASED TEST, YOU MAY BE INTERESTED ON TEST A

COMMENTS	STATISTICS	RECORDS

TAKE THE TEST

Title of test: TEST A Description: Testi per Palo Alto Author: IchbinPimi Other tests from this author Creation Date: 11/10/2024 Category: Others Number of questions: 75

Share the Test:

New Comment

No comments about this test.

Content:

Which CLI command is used to simulate traffic going through the firewall and determine which Security policy rule, NAT translation, static route, or PBF rule will be triggered by the traffic? check find test sim. An organization has Palo Alto Networks NGFWs that send logs to remote monitoring and security management platforms. The network team has reported excessive traffic on the corporate WAN. How could the Palo Alto Networks NGFW administrator reduce WAN traffic while maintaining support for all the existing monitoring/security platforms? Forward logs from firewalls only to Panorama and have Panorama forward logs to other external services. Forward logs from external sources to Panorama for correlation, and from Panorama send them to the NGFW. Configure log compression and optimization features on all remote firewalls. Any configuration on an M-500 would address the insufficient bandwidth concerns. A customer wants to set up a VLAN interface for a Layer 2 Ethernet port. Which two mandatory options are used to configure a VLAN interface? (Choose two.) Virtual router Security zone ARP entries Netflow Profile. An administrator has been asked to configure a Palo Alto Networks NGFW to provide protection against worms and trojans. Which Security Profile type will protect against worms and trojans? Anti-Spyware Instruction Prevention File Blocking Antivirus. A company needs to preconfigure firewalls to be sent to remote sites with the least amount of preconfiguration. Once deployed, each firewall must establish secure tunnels back to multiple regional data centers to include the future regional data centers. Which VPN configuration would adapt to changes when deployed to the future site? Preconfigured GlobalProtect satellite Preconfigured GlobalProtect client Preconfigured IPsec tunnels Preconfigured PPTP Tunnels. An administrator has been asked to configure active/passive HA for a pair of Palo Alto Networks NGFWs. The administrator assigns priority 100 to the active firewall. Which priority is correct for the passive firewall? 0 99 1 255. An administrator pushes a new configuration from Panorama to a pair of firewalls that are configured as an active/passive HA pair. Which NGFW receives the configuration from Panorama? The passive firewall, which then synchronizes to the active firewall The active firewall, which then synchronizes to the passive firewall Both the active and passive firewalls, which then synchronize with each other Both the active and passive firewalls independently, with no synchronization afterward. When configuring a GlobalProtect Portal, what is the purpose of specifying an Authentication Profile? To enable Gateway authentication to the Porta To enable Portal authentication to the Gateway To enable user authentication to the Portal To enable client machine authentication to the Portal. If a template stack is assigned to a device and the stack includes three templates with overlapping settings, which settings are published to the device when the template stack is pushed? The settings assigned to the template that is on top of the stack. The administrator will be promoted to choose the settings for that chosen firewall. All the settings configured in all templates. Depending on the firewall location, Panorama decides with settings to send. Which method will dynamically register tags on the Palo Alto Networks NGFW? Restful API or the VMware API on the firewall or on the User-ID agent or the ready-only domain controller (RODC) Restful API or the VMware API on the firewall or on the User-ID agent XML API or the VMware API on the firewall or on the User-ID agent or the CLI XML API or the VM Monitoring agent on the NGFW or on the User-ID agent. How does an administrator schedule an Applications and Threats dynamic update while delaying installation of the update for a certain amount of time? Configure the option for Threshold. Disable automatic updates during weekdays Automatically download only and then install Applications and Threats later, after the administrator approves the update. Automatically download and install but with the disable new applications option used. To connect the Palo Alto Networks firewall to AutoFocus, which setting must be enabled? Device>Setup>Services>AutoFocus Device> Setup>Management >AutoFocus AutoFocus is enabled by default on the Palo Alto Networks NGFW Device>Setup>WildFire>AutoFocus Device>Setup> Management> Logging and Reporting Settings. An administrator encountered problems with inbound decryption. Which option should the administrator investigate as part of triage? Security policy rule allowing SSL to the target server Firewall connectivity to a CRL Root certificate imported into the firewall with Trust enabled Importation of a certificate from an HSM. Which two virtualization platforms officially support the deployment of Palo Alto Networks VM-Series firewalls? (Choose two.) Red Hat Enterprise Virtualization (RHEV) Kernel Virtualization Module (KVM) Boot Strap Virtualization Module (BSVM) Microsoft Hyper-V. Which User-ID method maps IP addresses to usernames for users connecting through an 802.1x-enabled wireless network device that has no native integration with PAN-OSֲ software? XML API Port Mapping Client Probing Server Monitoring. Decrypted packets from the website https://www.microsoft.com will appear as which application and service within the Traffic log? eb-browsing and 443 SSL and 80 SSL and 443 web-browsing and 80. Which PAN-OSֲ® policy must you configure to force a user to provide additional credentials before he is allowed to access an internal application that contains highly-sensitive business data? Security policy Decryption policy Authentication policy Application Override policy. A Security policy rule is configured with a Vulnerability Protection Profile and an action of `Deny`. Which action will this cause configuration on the matched traffic? The configuration is invalid. The Profile Settings section will be grayed out when the Action is set to Deny. The configuration will allow the matched session unless a vulnerability signature is detected. The Deny action will supersede the per-severity defined actions defined in the associated Vulnerability Protection Profile. The configuration is invalid. It will cause the firewall to skip this Security policy rule. A warning will be displayed during a commit The configuration is valid. It will cause the firewall to deny the matched sessions. Any configured Security Profiles have no effect if the Security policy rule action is set to Deny. A user's traffic traversing a Palo Alto Networks NGFW sometimes can reach http://www.company.com. At other times the session times out. The NGFW has been configured with a PBF rule that the user's traffic matches when it goes to http://www.company.com. How can the firewall be configured automatically disable the PBF rule if the next hop goes down? Create and add a Monitor Profile with an action of Wait Recover in the PBF rule in question. Create and add a Monitor Profile with an action of Fail Over in the PBF rule in question Enable and configure a Link Monitoring Profile for the external interface of the firewall. Configure path monitoring for the next hop gateway on the default route in the virtual router. What are two benefits of nested device groups in Panorama? (Choose two.) Reuse of the existing Security policy rules and objects Requires configuring both function and location for every device All device groups inherit settings from the Shared group Overwrites local firewall configuration. Which Captive Portal mode must be configured to support MFA authentication? NTLM Redirect Single Sign-On Transparent. An administrator needs to implement an NGFW between their DMZ and Core network. EIGRP Routing between the two environments is required. Which interface type would support this business requirement? Virtual Wire interfaces to permit EIGRP routing to remain between the Core and DMZ Layer 3 or Aggregate Ethernet interfaces, but configuring EIGRP on subinterfaces only Tunnel interfaces to terminate EIGRP routing on an IPsec tunnel (with the GlobalProtect License to support LSVPN and EIGRP protocols) Layer 3 interfaces, but configuring EIGRP on the attached virtual router. A speed/duplex negotiation mismatch is between the Palo Alto Networks management port and the switch port to which it connects. How would an administrator configure the interface to 1Gbps? set deviceconfig interface speed-duplex 1Gbps-full-duplex set deviceconfig system speed-duplex 1Gbps-duplex set deviceconfig system speed-duplex 1Gbps-full-duplex set deviceconfig Interface speed-duplex 1Gbps-half-duplex. A web server is hosted in the DMZ, and the server is configured to listen for incoming connections only on TCP port 8080. A Security policy rule allowing access from the Trust zone to the DMZ zone need to be configured to enable we browsing access to the server. Which application and service need to be configured to allow only cleartext web-browsing traffic to thins server on tcp/8080? application: web-browsing; service: application-default application: web-browsing; service: service-https application: ssl; service: any application: web-browsing; service: (custom with destination TCP port 8080). If the firewall has the following link monitoring configuration, what will cause a failover? ethernet1/3 and ethernet1/6 going down ethernet1/3 going down ethernet1/3 or ethernet1/6 going down ethernet1/6 going down. In the image, what caused the commit warning? The CA certificate for FWDtrust has not been imported into the firewall. The FWDtrust certificate has not been flagged as Trusted Root CA SSL Forward Proxy requires a public certificate to be imported into the firewall The FWDtrust certificate does not have a certificate chain. Which method does an administrator use to integrate all non-native MFA platforms in PAN-OSֲ® software? Okta DUO RADIUS PingID. How would an administrator monitor/capture traffic on the management interface of the Palo Alto Networks NGFW? Use the debug dataplane packet-diag set capture stage firewall file command. Enable all four stages of traffic capture (TX, RX, DROP, Firewall). Use the debug dataplane packet-diag set capture stage management file command. Use the tcpdump command. An administrator needs to optimize traffic to prefer business-critical applications over non-critical applications. QoS natively integrates with which feature to provide service quality? Port Inspection Certificate revocation Content-ID App-ID. A session in the Traffic log is reporting the application as `incomplete.` What does `incomplete` mean? The three-way TCP handshake was observed, but the application could not be identified. The three-way TCP handshake did not complete. The traffic is coming across UDP, and the application could not be identified. Data was received but was instantly discarded because of a Deny policy was applied before App-ID could be applied. Refer to the exhibit. Untrust (Any) to Untrust (10.1.1.1), web-browsing -Allow Untrust (Any) to Untrust (10.1.1.1), ssh -Allow Untrust (Any) to DMZ (1.1.1.100), web-browsing -Allow Untrust (Any) to DMZ (1.1.1.100), ssh -Allow Untrust (Any) to DMZ (10.1.1.100, 10.1.1.101), ssh, web-browsing -Allow. Which three settings are defined within the Templates object of Panorama? (Choose three.) Setup Virtual Routers Interfaces Security Application Override. A customer has an application that is being identified as unknown-tcp for one of their custom PostgreSQL database connections. Which two configuration options can be used to correctly categorize their custom database application? (Choose two.) Application Override policy. Security policy to identify the custom application Custom application. Custom Service object. An administrator logs in to the Palo Alto Networks NGFW and reports that the WebUI is missing the Policies tab. Which profile is the cause of the missing Policies tab? Admin Role WebUI Authentication Authorization. An administrator has left a firewall to use the default port for all management services. Which three functions are performed by the dataplane? (Choose three.) WildFire updates NAT NTP antivirus file blocking. An administrator is using Panorama and multiple Palo Alto Networks NGFWs. After upgrading all devices to the latest PAN-OSֲ® software, the administrator enables log forwarding from the firewalls to Panorama. Pre-existing logs from the firewalls are not appearing in Panorama. Which action would enable the firewalls to send their pre-existing logs to Panorama? Use the import option to pull logs into Panorama A CLI command will forward the pre-existing logs to Panorama Use the ACC to consolidate pre-existing logs. The log database will need to exported form the firewalls and manually imported into Panorama. A firewall just submitted a file to WildFire for analysis. Assume a 5-minute window for analysis. The firewall is configured to check for verdicts every 5 minutes. How quickly will the firewall receive back a verdict? More than 15 minutes 5 minutes 10 to 15 minutes 5 to 10 minutes. What are the differences between using a service versus using an application for Security Policy match? Use of a service enables the firewall to take immediate action with the first observed packet based on port numbers. Use of an application allows the firewall to take immediate action if the port being used is a member of the application standard port list There are no differences between service or application. Use of an application simplifies configuration by allowing use of a friendly application name instead of port numbers. Use of a service enables the firewall to take immediate action with the first observed packet based on port numbers. Use of an application allows the firewall to take action after enough packets allow for App-ID identification regardless of the ports being used Use of a service enables the firewall to take action after enough packets allow for App-ID identification. Which Palo Alto Networks VM-Series firewall is valid? VM-25 VM-800 VM-50 VM-400. An administrator creates a custom application containing Layer 7 signatures. The latest application and threat dynamic update is downloaded to the same NGFW. The update contains an application that matches the same traffic signatures as the custom application. Which application should be used to identify traffic traversing the NGFW? Custom application System logs show an application error and neither signature is used. Downloaded application Custom and downloaded application signature files are merged and both are used. Starting with PAN-OS version 9.1, GlobalProtect logging information is now recorded in which firewall log? GlobalProtect System Authentication Configuration. Refer to the exhibit. ethernet1/6 ethernet1/3 ethernet1/7 ethernet1/5. Which three authentication services can an administrator use to authenticate admins into the Palo Alto Networks NGFW without defining a corresponding admin account on the local firewall? (Choose three.) Kerberos PAP SAML TACACS+ RADIUS LDAP. Which event will happen if an administrator uses an Application Override Policy? Threat-ID processing time is decreased The Palo Alto Networks NGFW stops App-ID processing at Layer 4. The application name assigned to the traffic by the security rule is written to the Traffic log. App-ID processing time is increased. Which Security policy rule will allow an admin to block facebook chat but allow Facebook in general? Deny application facebook-chat before allowing application facebook. Deny application facebook on top. Allow application facebook on top. Allow application facebook before denying application facebook-chat. A client is concerned about resource exhaustion because of denial-of-service attacks against their DNS servers. Which option will protect the individual servers? Enable packet buffer protection on the Zone Protection Profile. Apply an Anti-Spyware Profile with DNS sinkholing. Use the DNS App-ID with application-default Apply a classified DoS Protection Profile. If the firewall is configured for credential phishing prevention using the `Domain Credential Filter` method, which login will be detected as credential theft? Mapping to the IP address of the logged-in user. First four letters of the username matching any valid corporate username. Using the same user's corporate username and password. Matching any valid corporate username. An administrator has users accessing network resources through Citrix XenApp 7.x. Which User-ID mapping solution will map multiple users who are using Citrix to connect to the network and access resources? Client Probing Terminal Services agent GlobalProtect Syslog Monitoring. An administrator needs to upgrade a Palo Alto Networks NGFW to the most current version of PAN-OSֲ® software. The firewall has internet connectivity through an Ethernet interface, but no internet connectivity from the management interface. The Security policy has the default security rules and a rule that allows all web- browsing traffic from any to any zone. What must the administrator configure so that the PAN-OSֲ® software can be upgraded? Security policy rule CRL Service route Scheduler. Which feature prevents the submission of corporate login information into website forms? Data filtering User-ID File blocking Credential phishing prevention. Which option is part of the content inspection process? Packet forwarding process SSL Proxy re-encrypt IPsec tunnel encryption Packet egress process. In a virtual router, which object contains all potential routes? MIB RIB SIP FIB. An administrator creates an SSL decryption rule decrypting traffic on all ports. The administrator also creates a Security policy rule allowing only the applications DNS, SSL, and web-browsing. The administrator generates three encrypted BitTorrent connections and checks the Traffic logs. There are three entries. The first entry shows traffic dropped as application Unknown. The next two entries show traffic allowed as application SSL. Which action will stop the second and subsequent encrypted BitTorrent connections from being allowed as SSL? Create a decryption rule matching the encrypted BitTorrent traffic with action No-Decrypt, and place the rule at the top of the Decryption policy. Create a Security policy rule that matches application encrypted BitTorrent and place the rule at the top of the Security policy Disable the exclude cache option for the firewall. Create a Decryption Profile to block traffic using unsupported cyphers, and attach the profile to the decryption rule. Refer to the exhibit Certificate from Default Trust Certificate Authorities Domain Sub-CA Forward-Trust Domain-Root-Cert. Which option would an administrator choose to define the certificate and protocol that Panorama and its managed devices use for SSL/TLS services? Configure a Decryption Profile and select SSL/TLS services. Set up SSL/TLS under Policies > Service/URL Category > Service. Set up Security policy rule to allow SSL communication. Configure an SSL/TLS Profile. Which menu item enables a firewall administrator to see details about traffic that is currently active through the NGFW? ACC System Logs App Scope Session Browser. Which protection feature is available only in a Zone Protection Profile? SYN Flood Protection using SYN Flood Cookies ICMP Flood Protection Port Scan Protection UDP Flood Protections. Which CLI command can be used to export the tcpdump capture? scp export tcpdump from mgmt.pcap to < username@host:path> scp extract mgmt-pcap from mgmt.pcap to < username@host:path> scp export mgmt-pcap from mgmt.pcap to < username@host:path> download mgmt-pcap. An administrator has configured the Palo Alto Networks NGFW's management interface to connect to the internet through a dedicated path that does not traverse back through the NGFW itself. Which configuration setting or step will allow the firewall to get automatic application signature updates? A scheduler will need to be configured for application signatures. A Security policy rule will need to be configured to allow the update requests from the firewall to the update servers. A Threat Prevention license will need to be installed. A service route will need to be configured. Which three options are supported in HA Lite? (Choose three.) Virtual link Active/passive deployment Synchronization of IPsec security associations Configuration synchronization Session synchronization. Which CLI command enables an administrator to view details about the firewall including uptime, PAN-OSֲ® version, and serial number? debug system details show session info show system info show system details. During the packet flow process, which two processes are performed in application identification? (Choose two.) Pattern based application identification Application override policy match Application changed from content inspection Session application identified. Which tool provides an administrator the ability to see trends in traffic over periods of time, such as threats detected in the last 30 days? Session Browser Application Command Center TCP Dump Packet Capture. The certificate information displayed in the following image is for which type of certificate? Forward Trust certificate Self-Signed Root CA certificate Web Server certificate Public CA signed certificate. Which three steps will reduce the CPU utilization on the management plane? (Choose three.) Disable SNMP on the management interface Application override of SSL application Disable logging at session start in Security policies. Disable predefined reports. Reduce the traffic being decrypted by the firewall. Which feature must you configure to prevent users from accidentally submitting their corporate credentials to a phishing website? URL Filtering profile Zone Protection profile Anti-Spyware profile Vulnerability Protection profile. How can a candidate or running configuration be copied to a host external from Panorama? Commit a running configuration. Save a configuration snapshot Save a candidate configuration. Export a named configuration snapshot. If an administrator does not possess a website's certificate, which SSL decryption mode will allow the Palo Alto Networks NGFW to inspect traffic when users browse to HTTP(S) websites? SSL Forward Proxy SSL Inbound Inspection SSL Reverse Proxy SSL Outbound Inspection. An administrator sees several inbound sessions identified as unknown-tcp in the Traffic logs. The administrator determines that these sessions are form external users accessing the company's proprietary accounting application. The administrator wants to reliably identify this traffic as their accounting application and to scan this traffic for threats. Which option would achieve this result? Create a custom App-ID and enable scanning on the advanced tab. Create an Application Override policy Create a custom App-ID and use the ג€ordered conditionsג€ check box. Create an Application Override policy and a custom threat signature for the application. The administrator has enabled BGP on a virtual router on the Palo Alto Networks NGFW, but new routes do not seem to be populating the virtual router. Which two options would help the administrator troubleshoot this issue? (Choose two.) View the System logs and look for the error messages about BGP Perform a traffic pcap on the NGFW to see any BGP problems. View the Runtime Stats and look for problems with BGP configuration. View the ACC tab to isolate routing issues. An administrator has enabled OSPF on a virtual router on the NGFW. OSPF is not adding new routes to the virtual router. Which two options enable the administrator to troubleshoot this issue? (Choose two.) View Runtime Stats in the virtual router View System logs. Add a redistribution profile to forward as BGP updates. Perform a traffic pcap at the routing stage. Which three firewall states are valid? (Choose three.) Active Functional Pending Passive Suspended. Which virtual router feature determines if a specific destination IP address is reachable? Heartbeat Monitoring Failover Path Monitoring Ping-Path. An administrator has a requirement to export decrypted traffic from the Palo Alto Networks NGFW to a third-party, deep-level packet inspection appliance. Which interface type and license feature are necessary to meet the requirement? Decryption Mirror interface with the Threat Analysis license Virtual Wire interface with the Decryption Port Export license Tap interface with the Decryption Port Mirror license Decryption Mirror interface with the associated Decryption Port Mirror license. When is the content inspection performed in the packet flow process? after the application has been identified before session lookup before the packet forwarding process after the SSL Proxy re-encrypts the packet.

Report abuse