D-E-S-1-D-1-2

What is a consideration when sizing a Dell EMC SC Series system for capacity?. A. Read/Write ratio. B. IOPS. C. Page size. D. RAID overhead.

Which file resources are supported with Dell EMC Unity asynchronous replication?. A. File systems and LUNs. B. LUNs and VMFS datastores. C. NAS servers and NFS datastores. D. Consistency Groups and file systems.

Which bus is the Dell EMC Unity 880F DPE connected?. A. 0. B. 49. C. 89. D. 99.

Match each Dell EMC Unity feature with its destination. Cascade Replication. NAS server mobility. MetroSync. Fan-out replication.

When sizing a Dell EMC Unity Hybrid array, what are considerations for performance?. A. Workload and hardware bottlenecks. B. Active data and load balancing. C. Drive size and component redundancy. D. General capacity and port utilization.

Which Dell EMC storage system can a Dell EMC PowerStore array natively import data?. A. VNX. B. PowerVault. C. VMAX. D. VNX2.

What is the minimum recommended amount of Flash capacity in a Dell EMC Unity 880 Hybrid pool?. A. 5%. B. 8%. C. 10%. D. 15%.

What storage capacity should be specified to scope the system with Tier 1 RAID 10 protection? A customer requests a proposal for a new Dell EMC SC Series storage system with the following specifications: IO type: Random Existing data: 100 TB Rate of change: 2 TB per day Growth rate: 100 GB per day Snapshot retention: 1 week What storage capacity should be specified to scope the system with Tier 1 RAID 10 protection?. A. 2.5 TB. B. 4.5 TB. C. 6.5 TB. D. 8.5 TB.

A customer wants to provision a file system while creating a NAS server in a Dell EMC PowerStore T system. What information is needed to create the NAS server?. A. FQDN. B. Subnet. C. DNS details. D. WWPN.

What is a best practice for avoiding performance issues during these burst periods?. A. Enabling Quality of Service (QoS) will limit the burst problem. B. Quality of Service (QoS) is enabled by default, so one only needs to configure burst settings. C. Enable Quality of Service (QoS) then limit I/O for the entire FC port. D. Enable Quality of Service (QoS) then configure burst settings.

What is the correct order of steps to create a VM in a storage container provisioned on a Dell EMC PowerStore system? DRAG DROP In vCenter, what is the correct order of steps to create a VM in a storage container provisioned on a Dell EMC PowerStore system? Select and Place: Add powerstore cluster and VASA storage provider. configure powerstore connectivity. Provision VMs based on vVol datastore. Create VM storage policies. Create vVol datastore.

Which Dell EMC Midrange storage platforms support NVMe SCM drives?. A. PowerStore T and SC Series only. B. PowerStore T and PowerStore X. C. PowerStore T, Unity XT, and SC Series. D. PowerStore X, Unity XT, and SC Series.

What automatically chooses the destination appliance for the resource?. A. Performance Policy. B. Resource Balancer. C. Master appliance. D. Source array.

Which snapshot frequency interval (in minutes) is available? A Dell EMC PowerStore customer wants to schedule snapshots daily at 6 AM. Which snapshot frequency interval (in minutes) is available?. A. 5. B. 10. C. 20. D. 45.

What is a feature of Dell EMC Unity unified snapshots?. A. Delta set extension. B. Copy on First Access. C. Redirect on Write. D. Copy on First Write.

DRAG DROP Match each term with its description. Select and Place: Throughput. latency. IOPs. Queue Depth.

Which feature helps to enable file service High Availability on Dell EMC PowerStore?. A. NAS Network Heartbeat. B. RAID protected disk drives. C. Multiple redundant network ports with system bond. D. Redundant nodes with Live Volume enabled.

Which NVMe SSDs are supported by Dell EMC PowerStore?. A. 960 GB, 1920 GB, 3840 GB, and 7680 GB. B. 3840 GB, 7680 GB, and 15360 GB only. C. 1920 GB, 3840 GB, and 7680 GB only. D. 1920 GB, 3840 GB, 7680 GB, and 15360 GB.

What disk drive redundancy rule applies to 3.84 TB SSDs? A customer is managing a Dell EMC SC7020 array running SCOS 7.2. The array is running out of capacity. The customer asks you to begin scoping the system for additional drives. What disk drive redundancy rule applies to 3.84 TB SSDs?. A. Forced Dual Redundancy. B. Default Dual Redundancy. C. Default Single Redundancy. D. Forced Non-Redundancy.

What is a characteristic of tenant traffic on a Dell EMC Unity array?. A. Separated by the associated VLANs at the Linux Kernel layer. B. Separated by the associated subnet providing data separation with increasing security at the network layer. C. Separated by one associated VLAN providing data separation with increasing security at the Linux Kernel layer. D. Separated by the associated subnet at the Linux Kernel layer.

Which includes a pool of 64 drives in a RAID 5 (4+1) configuration. What is the minimum number of drives needed to expand the pool? A customer wants to expand their Dell EMC Unity Hybrid system, which includes a pool of 64 drives in a RAID 5 (4+1) configuration. What is the minimum number of drives needed to expand the pool?. A. 1. B. 5. C. 6. D. 7.

What should be your response? A customer has invested much time using the Dell PS Series Host Integration Toolkit (HIT) to integrate SAN snapshot protection with Microsoft SQL Server native snapshot technology. The customer expresses concern about whether Dell EMC SC Series cross-platform replication supports that capability. What should be your response?. A. Recreate integration on the SC Series array and use only SC-to-SC replication for those volumes. B. Leverage the integration investment and use only PS-to-PS replication on those volumes. C. Cross-platform replication works with SC Series HIT integrations. D. Cross-platform replication works with PS Series HIT integrations.

What combination of Dell EMC SC Series features meets these requirements? An ISP needs a data storage solution that allows them to set policies over resource usage. The solution needs to support network multi-tenancy while also providing full network failover protection. What combination of Dell EMC SC Series features meets these requirements?. A. Thin Replication and Storage Profiles. B. VLAN Tagging and QoS. C. Multi-protocol and Live Volume. D. Replication and vVols.

What are characteristics of D@RE on a Dell EMC Unity array?. A. Impacts array only during implementationHas minimal impact on performance. B. Does not impact array during implementationHas some impact on performance for a moment. C. Impacts array for a moment after implementationHas no impact on performance. D. Does not impact array during implementationHas minimal impact on performance.

How many hierarchical snapshots are supported by Dell EMC Unity?. A. 32 levels deep for LUNs 16 levels deep for file systems. B. 16 levels deep for LUNs 8 levels deep for file systems. C. 16 levels deep for LUNs 16 levels deep for file systems. D. 10 levels deep for LUNs 10 levels deep for file systems.

What provides data analytics for Dell EMC Midrange storage?. A. eLab Advisor. B. Unisphere Central. C. DSM. D. CloudIQ.

Which term should you use in response?. A. MB. B. IOPS. C. CPU Cycles. D. Latency.

What component or feature is provided by both the Dell EMC PowerStore 1000T array and the Dell EMC Unity XT 380 Series array?. A. Container Integration. B. Configured Block with Hypervisor. C. Unified System. D. NVMe disks.

Which design path on the Midrange Sizer should you take? You are designing a Dell EMC Unity solution. You need to predict its expected performance based on workload, number o and type of drives, and RAID protection. A. System Designer path. B. Application Oriented path. C. Quick Configuration path. D. Performance Data Input path.

Which encryption algorithm is used for SMB shares on Dell EMC Unity?. A. AES-CCM. B. AES128-GCM. C. AES-CMAC. D. HMAC-SHA256.

Which QoS options are supported by Dell EMC Unity XT?. A. VMFS Datastore and Storage Pool. B. iSCSI and Attached Snapshot. C. Individual LUN and iSCSI. D. Individual LUN and Group LUN.

What granularity are blocks deduplicated on a Dell EMC PowerStore array?. A. 4 KB. B. 8 KB. C. 32 KB. D. 64 KB.

What is the minimum percentage of total system IOPS that should be applied to Tier 3 drives? For Dell EMC SC Series arrays, what is the minimum percentage of total system IOPS that should be applied to Tier 3 drives?. A. 15%. B. 20%. C. 25%. D. 100%.

Which Dell EMC Unity storage array models support NVMe?. A. 380, 880, and 880F. B. 680F, 880, and 880F only. C. 680, 680F, 880, and 880F. D. 380, 380F, and 480F.

What is needed to correctly size the new array? A storage administrator wants to do a tech refresh from a legacy EQL system to a new Dell EMC SC Series array. What is needed to correctly size the new array?. A. Latency. B. Peak IOPS information. C. Storage tiers. D. Contract support end date.

What are the two biggest factors that determine IOPS when using SSDs in a Dell EMC SC Series array?. A. Current latency and queue depth. B. Application block size and overall throughput. C. Multi-tenant arrays and tier configuration. D. Read/write percentage and peak workload.

Which Dell EMC SC Series array allows for back-end expansion cards?. A. SCv3000. B. SC7020. C. SC5020. D. SCv3020.

When a remove replication operation is performed on a Dell EMC PowerStore array, what happens to the destination storage resource?. A. Is deleted. B. Stays in read/write mode. C. Stays in read-only mode. D. Taken offline.

What is a consequence of using an 800 GB drive and five 400 GB drives in a Dell EMC Unity XT dynamic pool?. A. Extents 9 – 14 are used to create a RAID Group. B. Unisphere short strokes the 800 GB drive to 8 extents. C. Extents 9 – 14 are marked unavailable until more 800 GB drives are added. D. Extents 9 – 14 are marked unavailable and can never be recovered.

What is a term for this configuration? A Dell EMC Unity storage administrator needs to build a NAS server configuration to support failover between SPs and NAS resources. What is a term for this configuration?. A. Local Replication. B. IP Multi-tenancy. C. LACP. D. Separate IP Switches.

What should be your response? You are designing a Dell EMC PowerStore solution with a customer. They ask if they can populate Slots 0 to 10 with NVMe SSD drives. What should be your response?. A. Any drive type can be populated in the remaining slots. B. NVMe SSDs must be populated in the remaining empty slots. C. NVMe SCM drives are required in Slots 0 through 10. D. NVMe SCM drives must be populated in the remaining empty slots.

When designing a Dell EMC SC Series system, which factors regarding general performance are important to understand?. A. Write size and latency. B. Block size and read size. C. Latency and queue depth. D. Transport and queue depth.

What is a characteristic of single-tier Flash on Dell EMC SC Series arrays?. A. Supports both write-intensive and read-intensive SSDs in the same tier. B. Snapshot data is kept on Tier1 in RAID 10 to optimize performance. C. Read only data is migrated to lower tiers when a snapshot is taken. D. Supports either write-intensive or read-intensive SSDs in the same tier.

What storage resources are affected with a refresh option on a Dell EMC PowerStore array?. A. Thin clones and volumes only. B. Snapshots, thin clones, and volumes. C. Thin clones, volumes, and replicas. D. Thin clones and snapshots only.

How many PCI-E lanes are provided for Slot 0 and Slot 1 in Dell EMC Unity XT arrays?. A. 8 for Slot 0; 8 for Slot 1. B. 16 for Slot 0; 16 for Slot 1. C. 8 for Slot 0; 16 for Slot 1. D. 16 for Slot 0; 8 for Slot 1.

What is recommended as a general guideline for making spare drive assignments? A customer has a Dell EMC SC9000 array with six SC420 enclosures running SCOS 7.3. The enclosure configuration is as follows: Two enclosures have write-intensive SSDs Four enclosures have read-intensive SSDs What is recommended as a general guideline for making spare drive assignments?. A. 2 spare drives per shell. B. Dedicated spares are not required. C. 2 spares per drive type per array. D. 1 spare per drive type per shell.

Which type of drive? The last two drive slots in a Dell EMC PowerStore 3000 are reserved for which type of drive?. A. SAS SSD. B. NVMe NVRAM. C. NVMe SSD. D. NVMe SCM.

What is a key feature of the Dell EMC Future-Proof Storage Loyalty Program for Dell EMC SC Series arrays?. A. 4:1 Performance Guarantee. B. 4 Year Satisfaction Guarantee. C. 4:1 Reduction Guarantee. D. 4:1 Efficiency Guarantee.

What should be your response? You are upgrading a Dell EMC Unity array to a Dell EMC PowerStore 1000 T array. The customer asks what they need to do so they can map PowerStore snapshots from the new PowerStore array to a host. What should be your response?. A. Create a volume group of the snapshot. B. Create a read/write snapshot of the snapshot. C. Create a copy of the snapshot. D. Create a thin clone of the snapshot.

Which features were introduced in SCOS 7.3?. A. Distributed Sparing and Live Volume ALUA. B. Data-in-Place upgrade for SC4020 and 4K HDD support. C. Unisphere for SC and Live Volume Auto-failover. D. CloudlQ support and Cross Platform Replication.

When enabling a multi-protocol NAS implementation on a Dell EMC PowerStore array, what is required for an end-to-end mapping of a Windows system?. A. Group ID (GID). B. User ID (UID). C. Active Directory (AD). D. Security ID (SID).

What is a benefit of cross-platform replication between Dell EMC SC Series and Dell PS Series arrays?. A. Leverages existing interfaces. B. Enables replication of volume collections. C. Supports cascade mode for the PS Group. D. Provides active snapshot replication.

Which KMS product should be recommended for use with Dell EMC SC Series arrays? Recent legislation requires a government customer to enhance data security by utilizing D@RE with SED drivers and use Level 3 certified security. Which KMS product should be recommended for use with Dell EMC SC Series arrays?. A. Dell EMC CloudLink. B. StorSecure StorMagic. C. Gemalto SafeNet K460. D. Thales Vormetric VTE.

Which Dell EMC SC Series technology should you use? A customer configures their Live Volume setup for synchronous replication with the High Availability option. They are designing a DR resiliency plan to ensure data integrity in the event of data corruption. Which Dell EMC SC Series technology should you use?. A. Live Volume with Non-Uniform Presentation. B. Live Volume with Uniform Presentation. C. Synchronous Replication with High Consistency. D. Live Volume with Managed Replication.

What is the minimum number of 10Gb iSCSI front-end ports required to meet the throughput needs? You are sizing a new Dell EMC SC Series array. Upon analyzing the Live Optics report, you find the current system has a peak throughput of 4687 MB. What is the minimum number of 10Gb iSCSI front-end ports required to meet the throughput needs?. A. 8. B. 10. C. 12. D. 16.

What is the Dell EMC best practice for sizing and designing a Dell EMC SC Series solution?. A. Front-end ports required for performance should always meet capacity needs. B. Drive capacity should meet performance needs. C. Size for performance first and capacity second. D. Size for capacity; Data Progression should always meet performance needs.

What course of action is recommended? You plan to schedule a Live Optics sampling with your customer to size a Dell EMC SC Series array. However, the customer wants to postpone the run until the end of the quarter because there could be more activity on the current storage system. What course of action is recommended?. A. Wait until the end of the quarter and collect a week-long sampling. B. Take a single-day sampling on any given day because that is sufficient in most instances. C. Wait until the end of the quarter and collect a single-day sampling. D. Take a week-long sampling on any given week because that is sufficient in most instances.

Which Dell EMC Unity feature could reduce failover times? A customer site has four NAS servers participating in MetroSync replication. Which Dell EMC Unity feature could reduce failover times?. A. QoS Failover Policy. B. Cabinet Failover. C. SRDF Metro. D. Consistency Groups.

What approach is recommended? You are designing a two-tiered Dell EMC SC Series solution that will be optimized for performance. You gather the necessary data from Live Optics and find that the read/write ratio is 80:20. What approach is recommended?. A. Size Tier 1 for 100% of the adjusted IOPS. B. Use distributed adjusted IOPS for all tiers. C. Use distributed adjusted IOPS for Tiers 1 and 2 only. D. Size Tier 2 for 100% of the adjusted IOPS.

What is the purpose of the NVMe NVRAM drives in a Dell EMC PowerStore 9000 array?. A. Read cache and vaulting. B. Read cache and base OS. C. Write cache and base OS. D. Write cache and vaulting.

Which Unity configuration should be recommended? Using customer supplied information, you have designed a solution using a Dell EMC Unity 450F array with 250 drives. The customer now wants to increase the drive count to 340 drives at the lowest cost. A. Keep the Unity 450F and add four 25-drive DAEs. B. Keep the Unity 450F and add two 80-drive DAEs. C. Upgrade to a Unity 480F and add four 25-drive DAEs. D. Upgrade to a Unity 480F and add two 80-drive DAEs.

What are components of a Dell EMC PowerStore Base Volume Family?. A. Thin clones, snapshots, and original volume only. B. Snapshots, original volume, and replication target only. C. Thin clones and snapshots only. D. Thin clones, snapshots, original volume, and replication target.

How many snapshots, per file system, are supported for Dell EMC Unity XT?. A. 128. B. 256. C. 512. D. 1024.

While provisioning volumes using the Dell EMC PowerStore Manager interface, what automatically determines on which appliance the volume will be provisioned?. A. Storage Volume. B. Storage Container. C. Resource Balance. D. Federation.

Which Dell EMC Unity model should be recommended? A customer needs a solution to support a virtual desktop infrastructure that requires faster storage at the lowest cost. In addition, they want to limit the maximum number of drives to 450. A. 380F. B. 480F. C. 680F. D. 880F.

Which Dell EMC Unity feature would meet the customer requirements? You are adding a Linux host running Oracle to a Dell EMC Unity Hybrid array. The customer requires the Oracle application to have low I/O latency and be deployed on available 10K SAS or NL-SAS drives. A. Quotas. B. Dynamic pools. C. FAST VP. D. FAST Cache.

What is the frequency with which capacity data is retrieved from Dell EMC Unity storage for use in the CloudIQ statistic?. A. 5 minutes. B. 1 hour. C. 6 hours. D. 30 minutes.

The last four drive slots in a Dell EMC PowerStore 5000 are reserved for which type of drive?. A. NVMe NVRAM. B. C. D.

A customer has a Dell EMC Unity XT array with six 600 GB drives using RAID 5 protection. They ask you for guidance about their plan to increase capacity by adding seven 600 GB drives with RAID 6 protection. A. RAID/width set in partnership groups cannot be changed. B. C. D.

What is the granularity of the sub-LUN slices for FastVP Policies on the Dell EMC Unity array?. A. 64 MB. B. 128 MB. C. 256 MB. D. 512 MB.

What information is required when creating a thin clone of a volume in Dell EMC PowerStore Manager?. A. Perfromance policy. B. Host Connectivity. C. Protection Policy. D. Storage Group.

What is the purpose of the NVMe NVRAM drives in Dell EMC PowerStore?. A. Vaulting and read cache. B. Vaulting and write cache. C. Read cache and metadata. D. Read.

Based on best practices, what should be the first step when designing a new Dell EMC Unity solution?. A. Calculate the aggregate performance of all hardware. B. Meet customer and obtain Live Optics report, if applicable. C. Gather impl.bin configuration file. D. Run netstat on the host.

A customer sales order lists M.2 Devices as a line item. The order is for a Dell EMC Unity 480F array. How many M.2 Devices should appear in the order?. A. 2. B. 4. C. 6. D. 8.

A storage administrator needs to configure Flash drive usage for a Dell EMC Unity Hybrid array. What is the minimal recommended percentage for the Flash drive when using active data?. A. 5%. B. C. D.

What are the recommended locations for NVMe drives on a Dell EMC Unity 880F array?. A. DPE Slots 17 - 24. B. DPE Slots 21 - 24. C. only DPE Slots 4 - 16. D. DPE Slots 22 - 24.

Where is SMB Encryption enabled in Dell EMC Unity?. A. Share advanced properties. B. C. D.

How can skew affect the design of a Dell EMC Unity system?. A. Skew can help to optimize performance. B. C. D.

When creating a Snapshot schedule with Dell EMC Unity, what is the minimum time interval for Snapshot frequency that one can select?. A. hours. B. C. D.

What block size is subject to the Dell EMC Unity data reduction algorithm?. A. 8 KB. B. C. D.

What is a characteristic of a Dell EMC Unity Consistency Group with active snapshots?. A. NO LUN can be added or removed if there are snapshots on them. B. C. D.

Which feature was added to MetroSync Replication in Dell EMC Unity OE version 4.4?. A. Cabinet failover. B. C. D.

You have a customer with 110 VAC (low line) power. They want to purchase a Dell EMC PowerStore array.What should you advise the customer?. A. They must provide 220-240 or adaptor. B. C. D.

A customer wants to understand how Dell EMC PowerStore hosts the base OS and storage system software, and if there are redundancies in case of a component failure. Which PowerStore components should you mention?. A. External SAS SSDs. B. External NVMe SSDs. C. Internal M.2 modules. D. Internal NVMe SCM drives.

A Dell EMC PowerStore customer wants to restore a volume from a snapshot. What should you advise?. A. Create a thin clone of the snapshot. B. Select the volume from the menu, click More Actions, then click Restore from Snapshot. C. D.

What is a consideration when using duplicate IP addresses for NAS servers on Dell EMC Unity storage?. A. Separate subnets must be established. B. It is not possible​ ... C. IP multi-tenancy must be enabled. D.

What are required when deploying multi-tenancy on a Dell EMC Unity array?. A. Separate network namespaces and one VLAN. B. A single network namespace and separate VLANs. C. Shared network namespaces and private VLAN. D. Separate network namespaces and multiple VLANs.

Which tool is a performance automation platform for gathering, analyzing, and viewing details of the customer environment and workload to promote the awareness of actual compute performance needs?. A. Live Optics. B. C. D.

Which Dell EMC Unity feature should you use to load balance servers and file system resources across SPs?. A. NAS Server Mobility. B. C. D.

What action is needed to associate a volume with a host when creating the storage resource in Dell EMC PowerStore to allow host access to block storage resources?. A. SATA SSD. B. NVMe SSD. C. NVMe SCM. D. SAS SSD.

What data is required when sizing a Dell EMC Unity solution?. A. Server information, workload characterization, capacity requirement replication and tiering. B. C. D.

How many replication rules can be associated with a protection policy in Dell EMC PowerStore?. A. 1. B. 2. C. 3. D. 4.

A customer is creating a replication rule for Dell EMC PowerStore Data Services. They need to guarantee that data is protected in case of a failure.What is the lowest acceptable RPO setting should they use?. A. 1 minute. B. 5 minutes. C. 15 minutes. D. 30 minutes.

A customer wants to expand their Dell EMC Unity All Flash system, which includes a pool of 64 drives in a RAID 5 (4+1) configuration. What is the minimum number of drives needed to expand the pool?. A. 1. B. 5. C. 6. D. 7.

When using vVols, what is the recommended API for communication with the ESXi VMware servers?. A. VASA. B. C. D.

Which NVMe SCM drives are supported by Dell EMC PowerStore?. A. 600 GB and 1.2 TB. B. 375 GB and 750 GB. C. 800 GB and 1.6 TB. D. 400 GB and 1 TB.

A customer has installed 10GbE Optical SFPs in their Dell EMC Unity XT array. While zoning, they are unable to locate the PWWN of the ports.What could be the reason for this issue?. A. 10Gb SFPs are not supported. B. C. D.

What is the correct order of steps to complete a non-disruptive upgrade of a Dell EMC PowerStore system?. A. Commit 4. B. Run Health Check and PUHC 2. C. Upgrade 3​. D. Upload Software 1 - Run Health Check and PUHC 2 - Upgrade 3 - Commit 4.

A customer wants to migrate a Dell EMC Unity x00/x50F file system to a new Dell EMC PowerStore cluster. How can this be done?. A. Import of the file storage resources is not supported. B. C. D.

How are vVol datastores mounted in Dell EMC PowerStore storage during the creation of vVol datastores in the vSphere environment shared by ESXi hosts?. A. Volume Groups. B. Storage containers. C. Storage Groups. D. VMFS datastores.

Which Dell EMC Unity feature provides network high availability with active-passive ports when provisioning File storage for a NAS client?. A. Redundant Interfaces. B. Preferred Interfaces. C. Link Aggregation. D. Fail-safe Networking.

When sizing a Dell EMC Unity Hybrid array, what are considerations for growth?. A. Port utilization and load balancing. B. Cache utilization and hardware bottlenecks. C. Latency and queue depth. D. General capacity and active data.

What is a benefit of restoring data from a Dell EMC Unity snapshot?. A. Can select which Consistency Group members have data restored. B. Supports replication to up to 32 remote systems. C. Enables efficient storage usage with 8 KB block granularity. D. Does not require additional pool storage.

To which bus is the Dell EMC Unity 880F DPE connected?. A. 0. B. 49. C. 89. D. 99.