CREATE TEST

ERASED TEST, YOU MAY BE INTERESTED ON dell operate

COMMENTS	STATISTICS	RECORDS

TAKE THE TEST

Title of test: dell operate Description: dell operate Author: maxim12 Other tests from this author Creation Date: 09/09/2024 Category: Others Number of questions: 57

Share the Test:

New Comment

No comments about this test.

Content:

1. What are the two proactive vSAN tests to validate the cluster? VM Creation Object Health Network Performance Cluster partition VM Creation Network Performance Cluster partition Object Health. What is true when scaling out a VxRail cluster? CAIU NA PROVA All-flash, NVMe, and hybrid nodes cannot be mixed in the same cluster. A cluster using 1 GbE networking is limited to a maximum of 10 nodes. All nodes in the same chassis must be identical for an E Series. A cluster using 1 GbE must be NVMe. A VxRail system administrator has been tasked to add the support account to all of the 50 VxRail clusters. The administrator is using API calls but is receiving 403 error codes. What is the likely issue? Username/password is not recognized Call has failed with internal errors Support account credentials provided are not valid User account does not have sufficient privileges. Which SolVe procedures are customer viewable and can be found in the Upgrade section? ACHO QUE CAIU NA PROVA Firmware Upgrade iDRAC Upgrade vCenter Upgrade Firmware Upgrade Hardware Upgrade/Expansion Software Upgrade Software Upgrade Stretched Cluster Upgrade Secure Connect Gateway Upgrade. What are the latency and bandwidth requirements between data sites when deploying a VxRail Stretched Cluster? Latency less than 10 ms Minimum bandwidth of 10 Gbps Latency less than 200 ms Minimum bandwidth of 1 Gbps Latency less than 10 ms Minimum bandwidth of 20 Gbps Latency less than 5 ms Minimum bandwidth of 10 Gbps. Which three processes are performed during a VxRail cluster shutdown? Client VMs are shut down. Service VMs are migrated. vSphere DRS is disabled. Health monitoring is enabled. v Sphere HA is disabled. Match each VxRail API request structure component to its description. There are more descriptions than VxRail API components. CHECK Header Base URL Body Method. An environment has two VxRail Clusters with this configuration: CAIU UMA BEM PARECIDA, SÓ QUE ERA FTT2, E 100GB, EU BOTEI QUE IRIA AUMENTAR 150GB TROCANDO DE RAID5 PARA RAID1, TEM QUE CONFERIR VMs on Cluster-A use a policy with FTT = 1 and FTM = Erasure Coding. VMs on Cluster-B use a policy with FTT = 1 and FTM = Mirroring. A 100 GB VM is planned to be vMotioned from Cluster-A to Cluster-B. How much more vSAN capacity is consumed in Cluster-B than in Cluster-A? 33 GB 50 GB 67 GB 100 GB. An administrator wants to perform maintenance on a VxRail system. What should the VxRail Cluster Health Monitoring status be set to before starting the maintenance activity? Enabled Maintenance mode Disabled Suspended. An organization wants to implement a zero data loss protection solution for its virtual machines. What is the recommended solution when using a VxRail system? VMware site recovery PowerProtect software RecoverPoint for VMs Stretched clusters. When is the vSAN performance service typically enabled? During periodic customer reviews During diagnosis through a vendor support case Manually during cluster deployment Automatically during cluster deployment. Using the VxRail Plugin, what does VxRail administrator use to compare the current component version state against the expected component version state? Compliance Reports Health Monitoring VxRail VxVerify Skyline Reports. What is the fault tolerance method provided by the default storage policy on a newly deployed VxRail all-flash cluster? CAIU NA PROVA RAID-1 RAID-6 RAID-1/0 RAID-5. An administrator has logged into their VxRail cluster and noticed that all nodes are in a disconnected state. Upon logging into individual nodes, all workloads are running and no services have been affected The licensing applied to the cluster is still in Evaluation mode. The administrator sees an unused vSphere License Key. What steps should the administrator follow to properly license the cluster? Select Administration > Licensing > Licenses > Assets > vSAN Clusters, and Assign License. Select Administration > Licensing > Licenses > Synchronize Licenses. Select Administration > Licensing > Licenses > Add > Enter License Keys. Select Administration > Licensing > Licenses, and apply a valid license key. An application VM must tolerate two faults. Which VxRail cluster configurations would support this requirement? EU ACHO QUE CAIU. FTT=2 with erasure coding across a five node Cluster FTT=2 with mirroring across a four node Cluster FTT=2 with mirroring across a five node Cluster FTT=2 with erasure coding across a six node Cluster FTT=2 and two Fault domains FTT=2 and mirroring across a four node Cluster. Which path should be followed to check disk level vSAN metrics? CAIU NA PROVA Host > Monitor > vSAN > Performance > Disks Cluster > Monitor > Host > vSAN > Performance > Disks Cluster > Configure > vSAN > Disk Management Host > Monitor > Performance > Overview. Which VxRail network supports Link Aggregation? CAIU NA PROVA Private Management vSAN and vMOTION VxRail System VMs ESXi Management. Which VDS port group load balancing option requires Static LAG EtherChannel configuration? CAIU NA PROVA Route based on physical NIC load Route based on source MAC hash Route based on IP hash Route based on originating virtual port. An administrator wants to locate the PSNT for a specific VxRail node in order to contact support. Where in the vSphere Client can this information be located? ACHO QUE CAIU NA PROVA Menu > VxRail Menu > Inventory > Host > Summary Hosts and Clusters > Host > Configure > Advanced System Settings Hosts and Clusters > Host > Monitor > VxRail > Physical View. Where is the VxRail Dashboard located in the vSphere client? Hosts and Clusters > Configure > VxRail Menu > VxRail Hosts and Clusters > Monitor > VxRail Menu > Administration. What is a supported VxRail deployment? Internal vCenter Server with customer-supplied Virtual Distributed Switch External vCenter Server with customer-supplied Virtual Distributed Switch Internal vCenter Server with hosts file External vCenter Server with internal DNS. What is the sequence of steps to deploy a second VDS for VxRail network traffic? Cable VxRail NIC ports to ToR switches. Configure the new VDS - Add hosts, assign physical adapters, and assign port groups to VMkernel adapters. Create a VDS with the required number of uplinks. Configure ToR switches to support VxRail network traffic on switch ports that are connected to the VxRail NIC ports. Create port groups on the new VDS for the VxRail networks that must be migrated. What is the order of steps to generate the SolVe procedure to add a capacity drive to a VxRail node? ACHO QUE CAI NA PROVA Select a VxRail model and software version. Expand VxRail Procedures. Select Hardware Upgrade/Expansion Procedures. Generate procedure. Select Capacity Drive (HDD/SSD) Expansion. What is the recommended vSphere HA response to a Datastore with All Paths Down event for vSAN HCI Mesh client clusters? Shut down and restart VMs Issue events Disabled Power off and restart VMs. Which path should be followed to determine how much vSAN capacity is available? Cluster > Monitor > vSAN > Capacity Cluster > Monitor > vSAN > Skyline Health Cluster > Configure > vSAN > Disk Management Cluster > Monitor > vSAN > Physical Disks. VxRail Manager provides a software stack for a software-defined data center. Which layers are part of the stack? Management, network, and storage Security, management, and network Network, storage, and security Storage, security, and management. What is a supported feature when using vSAN HCI Mesh? Data in Transit Encryption vSAN file services Storage vMotion 2-node vSAN clusters. A VxRail administrator is concerned that the Integrated NIC is a single point of failure on VxRail nodes. How should the network traffic be balanced to increase redundancy? Across two ports on a PCle NIC Across Integrated NIC and PCle NIC ports Across two Integrated NICs. What must be run to ensure all components are healthy before upgrading a VxRail Cluster? Skyline Health Performance Diagnostics vSAN Proactive Tests VxVerify. A failure occurs while upgrading a VxRail cluster. Which log file should be analyzed? CAI NA PROVA Icm-web.log marvin.log loudmouth.log platform_svc.log. What are all the actions that can be performed from the Node Information panel of the Physical View of a VxRail E series node? ACHO QUE CAI NA PROVA Replace Disk Shutdown Host Enable Chassis LED Replace Disk Shutdown Host Add Disk Shutdown Host Enable Chassis LED Add Disk Enable Disk LEDs. What is a benefit of using a trusted third party or an organization CA in VxRail Manager? Enables secure digital trust network verification over unsecured networks Minimal client configuration for trust relationships Allows decrypted communication over trusted secured networks Secured trust relationship between internal and external servers. Which system components are managed through a vCenter plug-in? RecoverPoint for Virtual Machines v Sphere VxRail Manager Secure Connect Gateway Secure Connect Gateway v Sphere VxRail Manager RecoverPoint for Virtual Machines. An administrator wants to implement a disaster recovery solution. Two sites are available. The primary site uses VxRail and the secondary site uses a non-vSAN VMware environment. Which technology minimizes data loss with the smallest recovery point objective for this scenario? Stretched Cluster RecoverPoint for VMs VMware HA v Sphere Replication. What is the default VLAN ID for internal management network traffic on VxRail? 0 1 3939 4096. A VxRail Stretched cluster deployment with eight nodes at each data site is being proposed. What is the latency requirement between each data site and the Witness site? Less than 5 ms Less than 10 ms Less than 100 ms Less than 200 ms. What is the correct path for editing the Object Repair Time from the vCenter client? CAI NA PROVA Cluster > Monitor > vSAN > Services > Object Repair Timer Host > Configure > vSAN > Services > Advanced Options > Edit (Repeat for each host) Cluster > Configure > vSAN > Services > Advanced Options > Edit Host > Monitor > vSAN > Services > Object Repair Timer (Repeat for each host). What is a consideration before removing a VxRail node from a cluster? The cluster must have enough nodes remaining to support FTT. The node must be in Maintenance Mode. The node must be disconnected. Capacity Reserve must be enabled. A VxRail administrator has been asked to configure fault domains for an all-flash VxRail Cluster. The application VMs must be able to tolerate two failures and use capacity as efficiently as possible. What is the minimum number of fault domains that must be configured? CAI NA PROVA 4 5 6. A VxRail administrator observes alarms that start with VXR in the vSphere client. How can they obtain information about the alarms and the related knowledge base articles? ACHO QUE CAI NA PROVA Use the VxRail Administration Guide. Go to the Alarm Definitions page and click the KB link. Use the VxRail Event Code Reference. In which environment is it recommended to enable vSAN deduplication and compression? VDI Using Full Clones OLTP Databases Mixed Workloads VDI Using Linked Clones. When vSAN deduplication and compression are enabled on an existing VxRail cluster, when does the disk reformatting operation occur? Every 60 minutes Every 5 minutes As new data is written Immediately. At what object level is vSAN deduplication and compression enabled for a VxRail system? Disk group Datacenter Virtual machine Cluster. A VxRail deployment has eight nodes. The VxRail administrator does not find any compatible datastores when trying to create a storage policy with FTT=2 and FTM=Erasure Coding. What is the likely reason? Erasure coding is only supported on all-flash systems. vSAN datastore used capacity is above 80%. vSAN capacity reserve has been enabled. Fault domains have not been configured. Which command is used to unlock the mystic user account from VxRail Manager? CAI NA PROVA pam_tally2 -- user=mystic -- unlock pam_tally2 -- user=mystic -- reset pam_tally2 -- user=mystic -- passwd pam tally2 -- user=mystic -- enable. An administrator must add an additional network card to an existing set of VxRail nodes in their infrastructure. After the network card has been added to each node, the administrator does not see them in use in vCenter. What must the administrator do to use the newly added uplinks? Use LCM to update NIC Drivers Add uplinks to the virtual distributed switch Add uplinks to the virtual standard switch Use esxcli to install necessary VIBs. What is a consideration when planning for expansion of an existing four node all-flash VxRail Cluster? ACHO QUE CAI NA PROVA New nodes can contain hybrid, all-flash, or NVMe disks. New nodes must be identical to the existing nodes. New nodes can be any processor family. Multiple new nodes can be added simultaneously. Which two files are used to automate VxRail deployment and validate the network configuration? Appliance JSON file PEQ data file Appliance JSON file SPEQ VxRail Test Plan SPEQ VxRail Configuration Portal PEQ data file. An implementation engineer is tasked with setting up RecoverPoint for VMs on a 5-node V570F cluster. How many VMs are licensed to be protected on the cluster? 5 15 25 30. What is a consideration when using ToR switches with VxRail? IPv6 Multicast must be disabled in this environment. Link aggregation must be enabled on VxRail switch ports. VxRail iDRAC Management ports require 10 GbE ports. All-Flash models must use 10 GbE or faster ports. . When using VxRail Manager, what is the source of information that can help validate good VxRail system post-deployment status? Last Heartbeat, Last Configuration Sent, Network Environment Settings, Cluster Monitor System Diagnostic, Events, Health Logical View, Health Physical View, Log Bundle MARVIN-Virtual-SAN-Cluster > Manage > Health and Performance MARVIN-Virtual-SAN-Cluster > Monitor > Virtual SAN > Health. An implementation engineer is configuring the network firewall to support a VxRail installation. Where can they find the necessary firewall rules? Network Validation Tool VxRail Configuration Portal As-Built Configuration Report Rack worksheet of the Network PEQ. For how many days are the vSphere evaluation licenses valid in a new VxRail implementation? CAI NA PROVA 30 45 60 90. A VxRail deployment has just been completed, and the performance service is enabled. The vSAN backend IOPS metrics are not available for the cluster. What is the reason for this issue? Data has not been populated yet Health service has not been turned on Monitoring policy has not been created Performance service has not been disabled and re-enabled. A VxRail deployment has just been completed but the vSAN performance statistics are not available for the cluster or virtual machines. What is the reason for this situation? Data has not been populated Performance service has not been manually enabled vSAN performance hot-fix has not been applied Monitoring policy has not been created. What action is required to enable VxRail Manager the ability to update system software and browse VxRail KB articles? CAI NA PROVA Set the appliance status to 'Installed' in the Dell EMC Install database Set the Username and Password for the Support Account Configure Proxy settings Enable Secure Remote Support (SRS). Which vSAN rules are configured for the VXRAIL-SYSTEM-STORAGE-PROFILE? CAI NA PROVA Failures to tolerate - 2 failures RAID-1 (Mirroring) Object space reservation - Thin provisioning Failures to tolerate - 1 failure RAID-1 (Mirroring) Object space reservation - Thick provisioning Failures to tolerate - 1 failure RAID-5 (Erasure Coding) Object space reservation - Thick provisioning Failures to tolerate - 1 failure RAID-1 (Mirroring) Object space reservation - Thin provisioning.

Report abuse