DTM 1

In which object can you track and trace the whole journey of your goods, if the whole journey has multiple transportation stages?. Freight booking. Freight unit. Consignment order. Freight order.

A discrepancy is configured with tolerance and blocking. Which of the following blocks are set when a discrepancy outside the configured tolerance is reported for a freight order? Note: There are 3 correct answers to this question. An execution block for the freight order. An execution block for the freight unit. An invoicing block for the freight unit. A planning block for the freight order. An invoicing block for the freight order.

What business documents (objects) can be used as a base for track and trace functionality in transportation management? Note: There are 2 correct answers to this question. Freight order. Resource. Service order. Forwarding order.

You want to use advanced shipping and receiving. What must you define? Note: There are 2 correct answers to this question. Location with type 1011 (vendor). Location with type 1003 (shipping point). Location with type 1200 (loading point). Location with type 1001 (production plant).

Where can you initiate carrier selection? Note: There are 2 correct answers to this question. From report/SCMTMS/PLN_OPT. From the freight booking user interface. From SAP Business Network for Logistics. From the container unit user interface.

You want to make sure that a particular forwarding house is entered as the ordering party in a freight order based on the ID of the consignee. What do you have to define in Customizing for the freight order type?. Shipper/consignee determination. Organizational unit determination condition. Partner determination profile. Creation strategy.

In which SAP Fiori apps can you define whether business shares are considered in the carrier selection process? Note: There are 2 correct answers to this question. Edit Freight Agreement. Create Business Share. Edit Carrier Selection Settings. Define Transportation Lane.

You have defined the transportation zone hierarchy and means of transport hierarchy as shown in the screenshot. Transportation lanes have been defined for all means of transport between all transportation zones. Five allocations have been defined: Orientation: Within; From: 1; To: 1; Means of transport: B Orientation: Within; From: 1; To: 1; Means of transport: A Orientation: Along; From: 2; To: 3; Means of transport: B Orientation: Along; From: 4; To: 2; Means of transport: A Orientation: Along; From: 4; To: 5; Means of transport: C Which allocations are consumed by a freight order with means of transport B from transportation zone 4 to transportation zone 5? Note: There are 3 correct answers to this question. Orientation: Along; From: 4; To: 2; Means of transport: A. Orientation: Within; From: 1; To: 1; Means of transport: A. Orientation: Within; From: 1; To: 1; Means of transport: B. Orientation: Along; From: 4; To: 5; Means of transport: C. Orientation: Along; From: 2; To: 3; Means of transport: B.

You want to print a road waybill document, a loading list, and labels for your freight orders with freight order type FOT1. You also want to send emails and XML messages to the carriers of freight orders of this type. What is the MINIMUM number of PPF (Post-Processing Framework) action profiles that you need to define for this purpose?. 4. 1. 2. 3.

You want to avoid dependency on a single carrier. Which object should you define to balance the load across multiple carriers?. Business share. Transportation allocation. Incompatibility. Condition.

From which of the following transportation management documents can you trigger integration to SAP Extended Warehouse Management?. Freight unit. Freight order. Consignment order. Package unit.

A carrier has responded to your request for quotation but was NOT automatically assigned to the freight order. What could be reasons for this? Note: There are 2 correct answers to this question. The carrier responded after the response time had expired. The tendering process was set to "Direct Tendering - Send Freight Order Directly". The program to evaluate freight quotations was NOT executed. The tendering profile contains a subsequent step.

When using dispute management, which activities can a carrier perform in SAP Business Network for Logistics? Note: There are 2 correct answers to this question. Upload files. Add a detention charge. Change the document currency. Change a charge line's calculation base.

Which of the following are some of the process steps in the strategic freight procurement process? Note: There are 3 correct answers to this question. Generate business shares. Evaluate responses and optimize. Define trade lanes. Prepare request for quotation (RFQ). Generate freight agreements.

What is the maximum number of freight settlement documents that can be created from a freight order with two deliveries during its lifecycle, given that all the charge elements in the calculation sheet have a value greater than zero?. 3. 1. 2. No limit.

Which documents are created in materials management when you transfer a freight settlement document from transportation management to materials management when cost distribution is NOT enabled? Note: There are 2 correct answers to this question. Carrier invoice. Service entry sheet. Purchase order. Settlement management document.

You want to increase the rates of a rate table by 3 percent for a specific source country using the Mass Update function. What must you specify in the Update Rates function?. Scale range. Scale item. Currency. Rounding profile.

In a side-by-side scenario, which of the following objects can you map from transportation management (TM) to materials management (MM)? Note: There are 2 correct answers to this question. TM charge type to MM service master. TM charge category to MM G/L account. TM purchasing organization to MM purchasing organization. TM charge type to MM service material group.

You create a freight agreement request for quotation (RFQ) master with seven RFQ items. Carrier A is NOT incumbent for three items and is removed from those items. Four other carriers are assigned to this freight agreement RFQ master. You generate the individual freight agreement RFQs. How many individual freight agreement RFQs are created for carrier A?. 1. 4. 3. 7.

You want to ensure that the system interprets rates from a rate table as percentages. Where do you have to set the percentage indicator? Note: There are 2 correct answers to this question. Calculation sheet. Scale. Calculation profile. Rate table.

Which of the following profiles is directly assigned to an organizational unit?. Charges profile. Calculation profile. Distribution profile. Dimensional weight profile.

Assuming an agreement determination condition is NOT used, which of the following involved parties determine the correct freight agreement for charge calculation in a freight order? Note: There are 2 correct answers to this question. Carrier. Ordering party. Purchasing organization. Executing carrier.

To which of the following can you assign a dimensional weight profile?. Charge type. Charges profile. Calculation profile. Calculation base.

You want to set up charge calculation for freight orders. Valid charges should consist of a base charge based on the distance and gross weight of the freight order, and a supplemental charge per container that is included in the freight order. Multiple containers are allowed for each freight order, and the charge is based on the container type. The container type can be small, medium, or large. What is the minimum number of charge lines with instruction type "standard" that you must set up?. 0. 2. 1. 3.

To which document type would you assign the event profile to calculate event-based charges in a rail transport?. Transportation unit. Freight booking. Freight unit. Freight order.

A carrier has an agreement with a shipper that starts on January 1 for fuel price as 5% of the base freight. The fuel surcharge is pegged to the current price of 3 USD a gallon. The fuel surcharge can change proportionally based on the fuel price on the calculation date. How will you define fuel surcharge calculation in transportation management? Note: There are 2 correct answers to this question. Use an index table for the fuel surcharge charge item. Use the rating amount or a standard rate table for the fuel surcharge. Use a rate table for the fuel surcharge with calculation date as a scale. Use a determination rule for the index rate table.

Which of the following can you determine using conditions in transportation charge management? Note: There are 2 correct answers to this question. Freight agreement. Carrier in the freight agreement. Validity date of the rate table. Rate table.

You have completed the configuration tasks for cost distribution and freight settlement in transportation management and materials management. The settlement documents were successfully posted. Which of the following business documents would you check to verify that the amounts and postings are correct? Note: There are 2 correct answers to this question. Shipment cost document. Forwarding settlement document. Service entry sheet. Settlement management document.

You add an assessorial charge to a freight order after the freight settlement document (FSD) has been posted and accruals have been booked in materials management. The background report to create FSDs determines change strategy "Reverse and Repost with new FSD" for this freight order. What will you see in transportation management and materials management? Note: There are 2 correct answers to this question. 1 purchase order in materials management. 2 FSDs and 1 credit memo in transportation management. 3 FSDs in transportation management. 3 service entry sheets in materials management.

The following settings are defined for a freight order from location A to location B with two freight units: The distance between locations A and B in the transportation lane is 1500 km, the duration is 19 hours, and the Fix Transportation Duration flag is set. The average speed for the means of transport is defined as 100 km/h and the GIS quality flag is NOT set. Loading and unloading of each freight unit at locations A and B is defined as 1 hour. The vehicle resource is available weekdays from 8:00 am to 8:00 pm. Loading starts on Monday at 8:30 am. When is unloading finished?. Tuesday 6:30 pm. Tuesday 7:30 am. Tuesday 7:30 pm. Tuesday 5:30 pm.