FCP - FortiManager 7.4 - NSE 5 FortiManager Exam

Given the configuration shown in the exhibit, which two statements are true? (Choose two answers). FortiManager is in workflow mode. An administrator can also lock the Local-FortiGate-1 policy package. The FortiManager ADOM workspace mode is set to Normal. The FortiManager ADOM is locked by the administrator.

Given the configuration shown in the exhibit, which two conclusions can you draw from the installation targets in the Install On column? (Choose two answers). Policy seq.# 3 will be installed on all managed devices and VDOMs that are listed under Installation Targets. seq.# 3 will be skipped because no installation targets are specified. Policy seq.# 2 will not be installed on the Local-FortiGate root VDOM because there is no root VDOM in the Installation Target. Policy seq.# 1 will be installed on the ISFW device root[NAT] and Student[NAT] VDOMs only.

What will be the result of reverting to a previous revision version in the revision history? (Choose one answer). It will generate a new version ID and remove all other revision history versions. It will install configuration changes to managed device automatically. It will tag the device settings status as Auto-Update. It will modify the device-level database.

An administrator would like to create a policy on the Staging ADOM in backup mode, and install it on the FortiGate device in the same ADOM. How can the administrator perform this task? (Choose one answer). The administrator must use the Policy & Objects section to create a policy first. The administrator must use a FortiManager script. The administrator must disable the FortiManager offline mode first. The administrator must change the ADOM mode to Advanced to bring the FortiManager online.

What can you conclude from the failed installation log shown in the exhibit? (Choose one answer). Policy ID 2 is installed in the disabled state. Policy ID 2 is installed without the remote user student. Policy ID 2 will not be installed. Policy ID 2 is installed without a source address.

In the event that one of the secondary FortiManager devices fails, which action must be performed to return the FortiManager HA manual mode to a working state? (Choose one answer). The FortiManager HA state transition is transparent to administrators and does not require any reconfiguration. Manually promote one of the working secondary devices to the primary role, and reboot the old primary device to remove the peer IP of the failed device. Reconfigure the primary device to remove the peer IP of the failed device. Reboot the failed device to remove its IP from the primary device.

An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package, Fortinet, in the custom ADOM1. What happens to the Fortinet policy package when it is created? (Choose one answer). You must assign the global policy package from the global ADOM. The global policy package is automatically assigned. You must reapply the global policy package to ADOM1. You can select the option to assign the global policies.

Which output is displayed right after moving the ISFW device from one ADOM to another? (Choose one answer). Image A. Image B. Image C. Image D.

An administrator has enabled Service Access on FortiManager. What is the purpose of Service Access on the FortiManager interface? (Choose one answer). Allows administrative access to FortiManager. It allows FortiManager to respond to requests for FortiGuard services from FortiGate devices. It allows FortiManager to determine the connection status of managed devices. It allows third-party applications to gain read/write access to FortiManager.

A junior administrator is troubleshooting a FortiManager connectivity issue that is occurring with a managed FortiGate device. Given the FortiManager device manager settings shown in the exhibit, what can you conclude from this scenario? (Choose one answer). The administrator must refresh the device to restore connectivity. FortiManager lost internet connectivity, therefore, the device appears to be down. The administrator can reclaim the FortiGate to FortiManager protocol (FGFM) tunnel to get the device online. The administrator recently restored a FortiManager configuration file.

Refer to the exhibit. You are using the Quick Install option to install configuration changes on the managed FortiGate. Which two statements correctly describe the result? (Choose two answers). It installs provisioning template changes on the FortiGate device. It provides the option to preview only the policy package changes before installing them. It installs all the changes in the device database first and the administrator must reinstall the changes on the FortiGate device. It installs device-level changes on the FortiGate device without launching the Install Wizard.

What percent of the available RAM is being used by the process in charge of downloading the web and email filter databases from the public FortiGuard servers? (Choose one answer). 2.9. 3.1. 1.5. 4.1.

Which two results occur if the script is run using the Device Database option? (Choose two answers). You must install these changes on a managed device using the Install Wizard. The successful execution of a script on the Device Database creates a new revision history. The script history shows successful installation of the script on the remote FortiGate device. The device Config Status is tagged as Modified.

Push updates are failing on a FortiGate device that is located behind a NAT device. Which two settings should the administrator check? (Choose two answers). That the override server IP address is set on FortiManager and the NAT device. That the external IP address on the NAT device is set to DHCP and configured with the virtual IP. That the NAT device IP address and correct ports are configured on FortiManager. That the virtual IP address and correct ports are set on the NAT device.

Refer to the exhibit. What is true about the objects highlighted in the image? (Choose one answer). They can be set to optional or required. They are available across all ADOMs by default. They can be used as variables in scripts. They cannot be created in the global database ADOM.

An administrator configures a new OSPF area on FortiManager and has not yet pushed the changes to the managed FortiGate device. In which database will the configuration be saved? (Choose one answer). Device-level database. ADOM-level database. Configuration-level database. Revision history database.

Which statement about the upgrade of ADOMs on FortiManager is true? (Choose one answer). To ensure database consistency, you must upgrade an ADOM before you upgrade the devices in it. Upgrading the FortiManager version upgrades all existing ADOMs automatically. You cannot import policies from a device until its FortiOS version matches the ADOM version. ADOMs using global objects can be upgraded before or after upgrading the global database ADOM.

An administrator created a new global policy package that includes header and footer policies and then assigned it to an ADOM. What are two outcomes of this action? (Choose two answers). To assign another global policy package later to the same ADOM, you must unassign this policy first. After you assign the global policy package to an ADOM. the impacted policy packages become hidden in that ADOM. You can editor delete all the global objects in the global ADOM. You must manually move the header and footer policies after the policy assignment.

Which configuration setting for FortiGate is part of an ADOM-level database on FortiManager? (Choose one answer). NSX-T Service Template. Routing. SNMP. Security profiles.

Refer to the exhibit Which shows the Download Import Report. Why is FortiManager failing to import firewall policy ID 1? (Choose one answer). Policy ID 1 is configured from the interface any to port6. FortiManager rejects the request to import this policy because the any interface does not exist on FortiManager. Policy ID 1 for this managed FortiGate already exists on FortiManager in the policy package named Remote-FortiGate. Policy ID 1 has an address object that already exists in the ADOM database with any as the interface association, and conflicts with the address object interface association locally on FortiGate. Policy ID 1 does not have the ADOM interface mapping configured on FortiManager.

What must you consider before deciding to use FortiManager to manage a FortiAnalyzer device? (Choose one answer). Confirm that FortiManager has enough storage capacity for the expected logs. Ensure that FortiAnalyzer features are installed in advance. Check whether FortiManager is part of a high availability (HA) cluster. Determine whether the VDOMs of the same FortiGate will be assigned to different ADOMs.

What is the purpose of ADOM revisions? (Choose one answer). To save the current state of the whole ADOM. To save the current state of all policy packages and objects for an ADOM. To revert individual policy packages and device-level settings for a managed FortiGate. To save the FortiManager configuration in the System Checkpoints.

An administrator is about to add the FortiGate device to FortiManager using the discovery process. FortiManager is operating behind a NAT device, and the administrator configured the FortiManager NATed IP address under the FortiManager system administration settings. What is the expected result ? (Choose one answer). During discovery, FortiManager uses only the FortiGate serial number to establish the connection. During discovery, FortiManager sets the FortiManager NATed IP address on FortiGate. During discovery, FortiManager sets the NATed device IP address on FortiGate. During discovery, FortiManager sets both the FortiManager NATed IP address and NAT device IP address on FortiGate.

An administrator is in the process of copying a system template profile between ADOMs by running the following command: execute fmprofile import-profile ADOM2 3547 /tmp/myfile Where does this command import the system template profile from? (Choose one answer). FortiManager file system. ADOM2 object database. ADOM2 device database. Source ADOM policy database.

Which API method is used to create objects or overwrite existing ones? (Choose one answer). Set. Add. Exec. Update.

What is a characteristic of the FortiManager high availability (HA) feature? (Choose one answer). When a secondary unit is removed, FortiManager updates the managed devices using TCP port 5199. The primary unit synchronizes all configuration revision with the secondary units. All secondary units must be in the same network as the primary unit. Each cluster member must be upgraded manually, starting with the primary unit.

Which two items are included in the FortiManager backup? (Choose two answers). All devices. Firmware images. FortiGuard database. Flash configuration.

Which two statements about Security Fabric integration with FortiManager are true? (Choose two answers). The Fabric View module enables you to view the Security Fabric ratings for Security Fabric devices. The Security Fabric license, group name, and password are required for the FortiManager Security Fabric integration. The Security Fabric settings are part of the device-level settings. The Fabric View module enables you to generate the Security Fabric ratings for Security Fabric devices.

An administrator has assigned a global policy package to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1? (Choose one answer). When creating a new policy package, the administrator can select the option to assign the global policy package to the new policy package. When a new policy package is created, the administrator must assign the global policy package from the global ADOM. When a new policy package is created, the administrator must import the global policy package to ADOM1. When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package.

An administrator created two new meta fields in FortiManager. Which operation can be performed with these parameters? (Choose one answer). You can invoke them using the $ character. You can add them to objects as custom attributes. You can export them to be used in other ADOMs. You can use them as variables in scripts.

An administrator runs the reload failure command diagnose test deploymanager reloadconf <deviceid> on FortiManager. What does this command do? (Choose one answer). It compares and provides differences in configuration on FortiManager with the current running configuration of the specified FortiGate. It downloads the latest configuration from the specified FortiGate and performs a reload operation on the device database. It reloads the policy package from the FortiManager to FortiGate. It installs the latest configuration on the specified FortiGate and updates the revision history database.

What happens if you create an ADOM with version 7.2, add FortiGate devices running FortiOS 7.2, and then upgrade the FortiGate devices to FortiOS 7.4? (Choose one answer). The ADOM can concurrently manage FortiGate devices running different firmware versions. Adding higher version FortiGate devices to a lower version ADOM triggers an automatic ADOM upgrade. The ADOM restricts access to devices running lower firmware versions. Upgrading the FortiGate devices to FortiOS 7.4 may result in ADOM database corruption.

An administrator has created a firewall address object that is used in multiple policy packages for multiple FortiGate devices in an ADOM. After the installation operation is performed, which IP/netmask will be shown on FortiManager for this firewall address object?. FortiManager generates an error for each FortiGate without a per-device mapping defined for that object. 192.168.1.0/24. FortiManager replaces the address object to none. 192.168.1.0/28.

A service provider administrator has assigned a global policy package to a managed customer ADOM named My_ADOM, which has four policy packages. The customer administrator has access only to My_ADOM. How can customer or service provider administrators remove both global header and footer policies from the policy package named Shared_Package? (Choose one answer). The customer administrator can unassign both polices by locking My_ADOM. The customer administrator can unassign both global polices from My_ADOM. The service provider administrator can unassign both global policies from My_ADOM. The service provider administrator can unassign both policies from the global ADOM.

Given the configuration shown in the exhibit, what are two results from this configuration? (Choose two answers). Unlocking an ADOM will submit configuration changes automatically to the approval administrator. Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out. Unlocking an ADOM will install configuration changes automatically on managed devices. The same administrator can lock more than one ADOM at the same time.

When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel? (Choose one answer). FortiGate will reject the CLI commands that will cause the tunnel to go down. FortiManager will revert and install a previous configuration revision on the managed FortiGate. FortiManager will not push the CLI commands as part of the installation that will cause the tunnel to go down. After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.

What are two outcomes of ADOM revisions? (Choose two answers). ADOM revisions can create System Checkpoints for the FortiManager configuration. ADOM revisions can save the current state of the whole ADOM. ADOM revisions can significantly increase the size of the configuration backups. ADOM revisions can save the current state of all policy packages and objects for an ADOM.

Which statement about the environment shown in the exhibit is correct? (Choose one answer). You must restart the secondary unit if you promote it to become the primary. A failover will take place after five minutes without receiving heartbeat packets. FortiAnalyzer features are not enabled on this FortiManager device. No FortiGuard packages have been synchronized between the cluster members yet.

An administrator would like to review, approve, or reject all the firewall policy changes made by the junior administrators. How should the workspace mode settings be configured on FortiManager? (Choose one answer). Set to read/write and using the policy locking feature. Set to normal and using the approval group feature. Set to workflow and using the ADOM locking feature. Set to workspace and using the policy locking feature.

An administrator created a new ADOM named Training for FortiGate devices only, and added the root FortiGate device of a Security Fabric group to the Training ADOM. Given the administrator's actions, which statement correctly describes the expected result for the downstream devices in the Security Fabric? (Choose one answer). The downstream devices show as unauthorized in the Training ADOM. The downstream devices are automatically authorized. The downstream devices will appear in the root ADOM. The downstream devices must be added using the Add Device wizard.

Which two statements about the scheduled backup of FortiManager are true? (Choose two answers). It can be configured using the CLI and GUI. It does not back up firmware images saved on FortiManager. It backs up all devices and the FortiGuard database. It supports FTP, SCP, and SFTP.

Which two statements about the integrity of databases on FortiManager are correct? (Choose two answers). The diagnose dvm check-integrity command attempts to fix a corrupted file system. Scheduled backups run database integrity commands automatically. Not following the correct upgrade path may cause inconsistencies in the databases. You should fix all database integrity issues before performing a backup. The diagnose cdb check adom-integrity command can correct issues related to looked devices.

If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two answers). During discovery, the FortiManager NATed IP address is not set by default on FortiGate. If the FGFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel. FortiGate is discovered by FortiManager through the FortiGate NATed IP address. FortiGate can announce itself to FortiManager only if the FortiManager non-NATed IP address is configured on FortiGate under central management.

Which two statements about the output are true? (Choose two answers). The latest revision history for the managed FortiGate does not match the device-level database. Configuration changes have been installed on FortiGate, which means the FortiGate configuration has been changed. Configuration changes directly made on FortiGate have been automatically updated to the device-level database. The latest revision history for the managed FortiGate does match the FortiGate running configuration.

You are moving managed FortiGate devices from one ADOM to a new ADOM. Which statement correctly describes the expected result? (Choose one answer). The shared device settings will be installed automatically. Any unused objects from a previous ADOM are moved to the new ADOM automatically. The shared policy package will not be moved to the new ADOM. Policy packages will be imported into the new ADOM automatically.

What does a policy package status of Never Installed indicate? (Choose one answer). FortiManager is unable to determine the policy package status. The policy configuration has been changed on a managed device and changes have not yet been imported into FortiManager. The policy package was never imported after a device was registered on FortiManager. The policy configuration has been changed on FortiManager and changes have not yet been installed on the managed device.

An administrator is importing a new device into FortiManager and has selected the options shown in the exhibit. What will happen if the administrator makes changes and then installs the modified policy package on this managed FortiGate? (Choose one answer). Policies not imported prompt a confirmation before being deleted. Policies not imported are marked as modified for future import attempts. Policies not imported remain untouched on the managed FortiGate. Policies not imported are deleted on the managed FortiGate during the installation.

Given the import report shown in the exhibit, how did FortiManager handle the service category named General? (Choose one answer). FortiManager ignored the firewall service category General but created a new service category in its database. FortiManager ignored the firewall service category General and deleted the duplicate value in its database. FortiManager ignored the firewall service category General and did not update its database with the value. FortiManager ignored the firewall service category General and updated the FortiGate duplicate value in the FortiGate database.

Refer to the exhibit. How will FortiManager try to get updates for antivirus and IPS? (Choose one answer). From the list of configured override servers that have the ability to fall back to public FDN servers. From the configured override server list only. From public FDNI servers with highest index number only. From the default server fds1.fortinet.com.

When using the FortiManager JSON API, what is the purpose of the session ID received after successful authentication? (Choose one answer). It is used to identify the FortiManager metadata on the client. It includes a hash to check the integrity of the JSON response sent by FortiManager. It contains information about the HTTP request method used. It serves as an authentication token for subsequent API requests.

An administrator, Trainer, who is assigned the Super_User profile, is trying to approve a workflow session that was submitted by another administrator, Student. However, Trainer is unable to approve the workflow session. What can prevent an admin account that has Super_User rights over the device from approving a workflow session? (Choose one answer). Trainer is not a part of workflow approval group. Trainer must close Student's workflow session before approving the request. Trainer must first create their own workflow session to approve student session. Trainer does not have full rights over this ADOM.

What will happen if the script is run using the Remote FortiGate Directly (via CLI) option? (Choose two answers). FortiManager provides a preview of CLI commands before executing this script on a managed FortiGate. FortiManager will create a new revision history. FortiGate will auto-update the FortiManager device-level database. You must install these changes using the Install Wizard.

Given the configuration shown in the exhibit, what are two results from this configuration? (Choose two answers). You can validate administrator login attempts through external servers. The same administrator can lock more than one ADOM at the same time. Two or more administrators can make configuration changes at the same time, in the same ADOM. Concurrent read-write access to an ADOM is disabled.

According to the error message, why is FortiManager failing to add the FortiAnalyzer device? (Choose one answer). A. The administrator must use the correct user name and password of the FortiAnalyzer device. The administrator must turn off the Use Legacy Device login and add the FortiAnalyzer device to the same network as FortiManager. The administrator must select the FortiManager administrative access checkbox on the FortiAnalyzer management interface. The administrator must use the Add Model Device section and discover the FortiAnalyzer device.

Which two conditions trigger FortiManager to create a new revision history? (Choose two answers). When FortiManager is auto-updated with configuration changes made directly on a managed device. When changes to the device-level database are made on FortiManager. When FortiManager installs device-level changes on a managed device. When a configuration revision is reverted to a previous revision in the revision history.

Which statement about the policy lock feature on FortiManager is true? (Choose one answer). Policy locking is available in workspace normal mode. Locking a policy takes precedence over a locked ADOM. When a policy is locked, the ADOM that contains it is also locked. Administrators in the approval group can work concurrently on a locked policy.

An administrator would like to create three ADOMs on FortiManager with different access levels based on departments. What two conclusions can you draw from the design shown in the exhibit? (Choose two answers). The FortiManager administrator must set the ADOM device mode to Advanced. Policies and objects databases can be shared between the Financial and HR ADOMs. An administrator with the super user profile can access all the VDOMs. The administrator must configure FortiManager in workspace normal mode.

Which two items does an FGFM keepalive message include? (Choose two answers). FortiGate IPS version. FortiGate license information. FortiGate configuration checksum. FortiGate uptime.

In the event that the monitored interface for the primary FortiManager device fails, which action must you perform to return FortiManager high availability (HA) to a working state? (Choose one answer). Reboot the current primary device to force a secondary device to become the new primary. Manually promote one of the working secondary devices to the primary role, and reboot the old primary device to remove the peer IP address of the failed device. Reconfigure the primary device to remove the peer IP address of the failed device from its configuration. He FortiManager HA failover is transparent to administrators and does not require any additional action.

How will FortiManager try to get updates tor antivirus and IPS? (Choose one answer). From the list of configured override servers or public FDN servers. From the configured override server IP address 10.0.1.50 only. From the default server fds1.fortinet.com. From public FDNI server IP address with the fourth highest octet only.

An administrator has created a firewall address object that is used in multiple policy packages for multiple FortiGate devices in an ADOM. After the installation operation is performed, which IP/netmask will be installed on Local-FortiGate for the LOCAL_SUBNET firewall address object? (Choose one answer). 192.168.1.0/24. Local-FortiGate automatically chooses an IP/netmask based on its network interface settings. It will create two firewall address objects on Local-FortiGate with 192.168.1.0/24 and 10.0.5.0/24 values. 10.0.5.0/24.

You want to let multiple administrators work in the same ADOM without creating configuration conflicts What is the best and the most effective solution to apply? (Choose one answer). Configure RADIUS authentication to assign ADOM roles to each user. Enable workflow mode, which is the only way to prevent concurrent configuration conflicts. Assign administrators with JSON API access to the FortiManager. Activate workspace mode in the ADOM settings.

An administrator has created a firewall address object that is used in multiple policy packages for multiple FortiGate devices in an ADOM. After the installation operation is performed, which IP/netmask will be installed on Remote-Firewall [VDOMI) for the LAN firewall address object? (Choose one answer). 21.21.2.5/255.255.255.255. 172.16.5.20/255.2551255.255. 172.16.5.0/255.255.255.0. 10.10.10.5/255.255.255.255.

If the monitored interface for the primary FortiManager device fails, what must you do to maintain high availability (HA)? (Choose one answer). The FortiManager HA failover is transparent to administrators and does not require any additional action. Manually promote one of the working secondary devices to the primary role, and reboot the original primary device to remove the peer IP address of the failed device. Reconfigure the primary device to remove the peer IP address of the failed device from its configuration. Check the integrity database of the primary device to force a secondary device to become the new primary with all active interfaces.

An administrator needed to recover all the configurations related to the user, Support. The configurations were saved in configuration revision ID 9. The administrator reverted the configuration using the Configuration Revision History window and received the CLI output shown in the exhibit. What can you conclude from the CLI output? (Choose one answer). The administrator set the flag to 0 to prevent configuration overrides. The administrator reinstalled the policy package. The administrator needs to retrieve the device to correctly detect the FortiGate firmware version. The administrator installed only the device-level configuration.

An administrator wants to configure and manage multiple objects in the FortiManager database and give access to other users who work in the same database. To stay in control of the changes made to firewall policies by other team members, the administrator needs a setup where all modifications go through a central check before they can be installed. How can the administrator create this setup? (Choose one answer). Enable the prompt asking the administrator to accept firewall policies changes before saving. Enable the workspace (for all ADOMs) to control all changes made by any administrator. Enable device lock and the advanced mode feature in the ADOM. Enable workflow mode and the ADOM lock feature.

An administrator has assigned a global policy package to a new ADOM named ADOM1 What will happen if the administrator tries to create a new policy package in ADOM1? (Choose one answer). The administrator will be able to select the option to assign the global policy package to the new policy package. FortiManager will automatically assign the global policy package to the new policy package. FortiManager will automatically install policies on the policy package in ADOM1. The administrator will have to assign the global policy package from the global ADOM.

Which is recommended when you are managing a high volume of logs in your network? (Choose one answer). Store logs on FortiManager and use FortiView. Add and manage FortiAnalyzer from FortiManager. Enable advanced ADOM mode on FortiManager. Forward logs from FortiAnalyzer to FortiManager daily.

FortiGate HQ-NGFW-1 downloads and validates FortiGuard databases from FortiManager, which acts as a local FortiGuard Distribution Server (FDS) in a closed network. An administrator pushes a new firewall policy with an intrusion prevention system (IPS) profile from FortiManager to FortiGate HQ-NGFW-1. However, FortiGate does not recognize the new IPS signature from FortiManager. What is the most likely reason why FortiGate HQ-NGFW-1 does not recognize the new IPS signature? (Choose one answer). FortiGate must enable rating for the FortiManager IP address, 192.168.1.120, in server list 1. FortiManager and FortiGate have different IPS database versions. The administrator must enable IPv6 connections for FortiGuard services on FortiManager. The administrator must enable the fortiguard-anycast option to correctly download all signatures from the local FDS.

While attempting to push a NetFlow configuration script through the FortiManager policy package, an administrator encounters an error stating that an object is unrecognized in line 4. Starting log (Run on database) config vdom edit AGEUSR [line 4] > config sys interface [parameter(s) invalid. detail: object unrecognized] Failed to commit to DB, reason ([line 4] > config sys interface [parameter(s) invalid. detail: object unrecognized]) Running script(NetFlow_Configuration) on DB failed What must the administrator do to successfully apply the NetFlow configuration script and avoid the object unrecognized error? (Choose one answer). Make sure the user running the script has full access to the VDOM—AGEUSR. Run the script on the device database. Use metadata variables if they use VDOMs in the script. Create a normalized interface on the policy layer before running the script.

Given the configuration shown in the exhibit, which two statements are true? (Choose two.). An administrator can also lock the Local-FortiGate_root policy package. FortiManager is in workflow mode. The FortiManager ADOM is locked by the administrator. The FortiManager ADOM workspace mode is set to Normal.

An administrator enabled workspace mode and now wants to delete an address object that is currently referenced in a firewall policy. Which two results can the administrator expect? (Choose two.). FortiManager will temporarily change the status of the referenced firewall policy to disabled. FortiManager will disable the status of the address object until the changes are installed. FortiManager will not allow the administrator to delete a referenced address object until they lock the ADOM. FortiManager will replace the deleted address object with the none address object in the referenced firewall policy.

What is the purpose of ADOM revisions?. To save the current state of the whole ADOM. To save the current state of all policy packages and objects for an ADOM. To revert individual policy packages and device-level settings for a managed FortiGate. To save the FortiManager configuration in the System Checkpoints.

Which two statements about the output are true? (Choose two.). The latest revision history for the managed FortiGate does not match the device-level database. Configuration changes have been installed on FortiGate, which means the FortiGate configuration has been changed. Configuration changes directly made on FortiGate have been automatically updated to the device-level database. The latest revision history for the managed FortiGate does match the FortiGate running configuration.

Which statement about the policy lock feature on FortiManager is true?. Policy locking is available in workspace normal mode. Locking a policy takes precedence over a locked ADOM. When a policy is locked, the ADOM that contains it is also locked. Administrators in the approval group can work concurrently on a locked policy.

An administrator runs the Policy Check feature on FortiManager ADOM. What will be the result?. It will find and provide recommendations to combine multiple separate policy packages into one common policy package. It will find and merge duplicate policies in the policy package. It will find and provide recommendations for optimizing policies in a policy package. It will find and delete disabled firewall policies in the policy package.

An administrator created a header and footer global policy package and assigned it to an ADOM. What are two outcomes from this action? (Choose two.). You must manually move the header and footer policies after the policy assignment. After you assign the global policy package to an ADOM, the policy package is hidden from the ADOM and cannot be viewed. If you assign an additional global policy package to the same ADOM, FortiManager removes previously assigned policies. You can edit or delete all the global objects in the global ADOM.

An administrator is replacing a failed device on FortiManager by running the following command: execute device replace sn <devname> <serialnum>. Which device name and serial number must the administrator use?. The device name of the new device and serial number of the failed device. The device name and serial number of the failed device. The device name of the failed device and serial number of the new device. The device name and serial number of the new device.

Which two settings are required for FortiManager Management Extension Applications (MEA)? (Choose two.). You must create an MEA special policy on FortiManager using the super user profile. You must open the ports to the Fortinet registry. When you configure MEA, you must open TCP or UDP port 540. The administrator must have the super user profile.