CREATE TEST

ERASED TEST, YOU MAY BE INTERESTED ON FMG_7.2

COMMENTS	STATISTICS	RECORDS

TAKE THE TEST

Title of test: FMG_7.2 Description: EXAM OF FORTINET Author: ROPECH Other tests from this author Creation Date: 29/02/2024 Category: Competitive Exam Number of questions: 88

Share the Test:

New Comment

No comments about this test.

Content:

In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices only. The administrator authorized the FortiGate device on FortiManager using the Fortinet Security Fabric. Given the administrator’s actions, which statement correctly describes the expected result? The FortiManager administrator must add the authorized device to the Training ADOM using the Add Device wizard only. The authorized FortiGate will appear in the root ADOM. The authorized FortiGate can be added to the Training ADOM using FortiGate Fabric Connectors. The authorized FortiGate will be automatically added to the Training ADOM. In the event that one of the secondary FortiManager devices fails, which action must be performed to return the FortiManager HA manual mode to a working state? The FortiManager HA state transition is transparent to administrators and does not require any reconfiguration. Manually promote one of the working secondary devices to the primary role and reboot the old primary device to remove the peer IP of the failed device. Reconfigure the primary device to remove the peer IP of the failed device. Reboot the failed device to remove its IP from the primary device. Which three settings are the factory default settings on FortiManager? (Choose three.) The administrative domain is disabled. The Port1 interface IP address is 192.168.1.99/24. Management Extension applications are enabled. The FortiManager setup wizard is disabled. FortiAnalyzer features are disabled. Refer to the exhibit. A junior administrator is troubleshooting a FortiManager connectivity issue that is occurring with managed FortiGate devices. Given the FortiManager device manager settings shown in the exhibit, what can you conclude from the exhibit? FortiManager lost internet connectivity, therefore, both devices appear to be down. The administrator must refresh both devices to restore connectivity. The administrator had restored the FortiManager configuration file. The administrator can reclaim the FGFM tunnel to get both devices online. Refer to the exhibit. What can you conclude from the failed installation log shown in the exhibit? Policy ID 2 will not be installed. Policy ID 2 is installed in the disabled state. Policy ID 2 is installed without a source address. Policy ID 2 is installed without the remote user student. Refer to the exhibit. Given the configuration shown in the exhibit, how did FortiManager handle the service category named General? FortiManager ignored the firewall service category General and updated the FortiGate duplicate value in the FortiGate database. FortiManager ignored the firewall service category General and did not update its database with the value. FortiManager ignored the firewall service category General but created a new service category in its database. FortiManager ignored the firewall service category General and deleted the duplicate value in its database. An administrator is in the process of moving the system template profile between ADOMs by running the following command: execute fmprofile import-profile ADOM2 3547 /tmp/myfile File system ADOM1 ADOM2 object database ADOM2. What does a policy package status of Never Installed indicate? The policy configuration has been changed on a managed device and changes have not yet been imported into FortiManager. FortiManager is unable to determine the policy package status. The policy configuration has been changed on FortiManager and changes have not yet been installed on the managed device. The policy package was never imported after a device was registered on FortiManager. Refer to the exhibit. If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.) During discovery, the FortiManager NATed IP address is not set by default on FortiGate. If the FGFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel. FortiGate is discovered by FortiManager through the FortiGate NATed IP address. FortiGate can announce itself to FortiManager only if the FortiManager non-NATed IP address is configured on FortiGate under central management. When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel? FortiGate will reject the CLI commands that will cause the tunnel to go down. FortiManager will revert and install a previous configuration revision on the managed FortiGate. FortiManager will not push the CLI commands as part of the installation that will cause the tunnel to go down. After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down. You are moving managed FortiGate devices from one ADOM to a new ADOM. Which statement correctly describes the expected result? The shared device settings will be installed automatically. Any unused objects from a previous ADOM are moved to the new ADOM automatically. The shared policy package will not be moved to the new ADOM. Policy packages will be imported into the new ADOM automatically. An administrator enabled workspace mode and now wants to delete an address object that is currently referenced in a firewall policy. Which two results can the administrator expect to happen? (Choose two.) FortiManager will temporarily change the status of the referenced firewall policy. FortiManager will disable the status of the address object. FortiManager will replace the deleted address object with the none address object in the referenced firewall policy. FortiManager will not allow the administrator to delete a referenced address object until the ADOM is locked. An administrator runs the Policy Check feature on FortiManager ADOM. What will be the result? It will find and provide recommendations to combine multiple separate policy packages into one common policy package. It will find and merge duplicate policies in the policy package. It will find and provide recommendations for optimizing policies in a policy package. It will find and delete disabled firewall policies in the policy package. An administrator created a header and footer global policy package and assigned it to an ADOM. What are two outcomes from this action? (Choose two.) You must manually move the header and footer policies after the policy assignment. After you assign the global policy package to an ADOM, the policy package is hidden from the ADOM and cannot be viewed. If you assign an additional global policy package to the same ADOM, FortiManager removes previously assigned policies. You can edit or delete all the global objects in the global ADOM. An administrator is replacing a failed device on FortiManager by running the following command: execute device replace on <devname> <serialnum>. Which device name and serial number must the administrator use? The device name of the new device and serial number of the failed device The device name and serial number of the failed device The device name of the failed device and serial number of the new device The device name and serial number of the new device. Refer to the exhibit. How will FortiManager try to get updates for antivirus and IPS? From the list of configured override servers or public FDN servers From the default server fds1.fortinet.com From the configured override server IP address 10.0.1.50 only From public FDNI server IP address with the fourth highest octet only. Refer to the exhibit Which two statements about the output are true? (Choose two.) Configuration changes have been installed on FortiGate, which means the FortiGate configuration has been changed. The latest revision history for the managed FortiGate does match the FortiGate running configuration. Configuration changes directly made on FortiGate have been automatically updated to the device-level database. The latest revision history for the managed FortiGate does not match the device-level database. Which two settings are required for FortiManager Management Extension Applications (MEA)? (Choose two.) You must create an MEA special policy on FortiManager using the super user profile. You must open the ports to the Fortinet registry. When you configure MEA, you must open TCP or UDP port 540. The administrator must have the super user profile. Refer to the exhibit. Given the configuration shown in the exhibit, what are two results from this configuration? (Choose two.) Unlocking an ADOM will submit configuration changes automatically to the approval administrator. Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out. The same administrator can lock more than one ADOM at the same time. Unlocking an ADOM will install configuration changes automatically on managed devices. An administrator has assigned a global policy package to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1? When a new policy package is created, the administrator must import the global policy package to ADOM1. When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package. When a new policy package is created, the administrator must assign the global policy package from the global ADOM. When creating a new policy package, the administrator can select the option to assign the global policy package to the new policy package. Refer to the exhibit. On FortiManager, an administrator created a new system template named Training with two new DNS addresses. During the installation preview stage, the administrator notices that central-management settings need to be purged. What can be the main reason for the central-management purge command? The Remote-FortiGate device does not have any DNS server-list configured in the central-management settings. The DNS addresses in the default system settings are the same as the Training system template. The ADOM is locked by another administrator. The Training system template has a default FortiGuard widget. Refer to the exhibit. Which statement is true about the FortiManager ADOM policy tab based on the API request? The API command has enabled both central NAT and interface policy on the policy tab. The API command has requested the policy tab permissions information only. The API command has failed when requesting policy tab permissions information. The API command has applied to customer with ID: 200. What will happen if FortiAnalyzer features are enabled on FortiManager? FortiManager will keep all the logs and reports on the FortiManager. FortiManager will install the logging configuration to the managed devices. FortiManager can be used only as a logging device. FortiManager will enable ADOMs to collect logs automatically from non-FortiGate devices. . An administrator would like to review, approve, or reject all the firewall policy changes made by the junior administrators. How should the workspace mode settings be configured on FortiManager? Set to normal and using the approval group feature. Set to read/write and using the policy locking feature. Set to workflow and using the ADOM locking feature. Set to workspace and using the policy locking feature. Refer to the exhibit. What will happen if the script is run using the Remote FortiGate Directly (via CLI) option? (Choose two.) FortiManager provides a preview of CLI commands before executing this script on a managed FortiGate. FortiManager will create a new revision history. FortiGate will auto-update the FortiManager device-level database. You must install these changes using the Install Wizard. View the following exbibit What is the purpose of setting ADOM Mode to Advanced? The setting allows automatic updates to the policy package configuration for a managed device. The setting enables the ADOMs feature on FortiManager. The setting disables concurrent ADOM access and adds ADOM locking. This setting allows you to assign different VDOMs from the same FortiGate to different ADOMs. / This setting allows you to assign a VDOM from a single device to a different ADOM. What is the purpose of ADOM revisions? To save the current state of all policy packages and objects for an ADOM. To create System Check points for the FortiManager configuration. To revert individual policy packages and device-level settings for a managed FortiGate by reverting to a specific ADOM revision To save the current state of the whole ADOM. . An administrator wants to delete an address object that is currently referenced in a firewall policy. What can the administrator expect to happen? FortiManager will not allow the administrator to delete a referenced address object. FortiManager will replace the deleted address object with all address object in the referenced firewall policy. FortiManager will replace the deleted address object with the none address object in the referenced firewall policy. FortiManager will disable the status of the referenced firewall policy. . Which three settings are the factory default settings on FortiManager? (Choose three.) Port1 interface IP address is 192.168.1.99/24. FortiAnalyzer features are disabled. Password is fortinet Reports and Event Monitor panes are enabled. Username is admin. . An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package, Fortinet, in the custom ADOM1. Which statement about the global policy package assignment to the newly-created policy package Fortinetis true? When a new policy package is created, it automatically assigns the global policies to the new package. / When the Fortinet policy package is created, it automatically assigns the global policies When a new policy package is created, you need to reapply the global policy package to the ADOM. When a new policy package is created, you can select the option to assign the global policies to the new package. When a new policy package is created, you need to assign the global policy package from the global ADOM. . What will happen if FortiAnalyzer features are enabled on FortiManager? FortiManager can be used only as a logging device. FortiManager will reboot. FortiManager will send the logging configuration to the managed devices so the managed devices will start sending logs to FortiManager FortiManager will enable ADOMs automatically to collect logs from non-FortiGate devices. . Which two statements about Security Fabric integration with FortiManager are true? (Choose two.) The Security Fabric license, group name and password are required for the FortiManager Security Fabric integration. The Fabric View module enables you to view the Security Fabric ratings for Security Fabric devices. The Fabric View module enables you to generate the Security Fabric ratings for Security Fabric devices. The Security Fabric settings are part of the device level settings. . A service provider administrator has assigned a global policy package to a managed customer ADOM named My ADOM, which has four policy packages. The customer administrator has access only to My ADOM. How can customer or service provider administrators remove both global header and footer policies from the policy package named Shared_Package? The customer administrator can unassign both polices by locking My ADOM The service provider administrator can unassign both policies from the global ADOM The customer administrator can unassign both global polices from My ADOM The service provider administrator can unassign both global policies from My ADOM . Review the download import report. Why is it failing to import firewall policy ID 1 Policy ID 1 is configured from the interface any to port6. FortiManager rejects the request to import this policy because the any interface does not exist on FortiManager Policy ID 1 does not have the ADOM Interface mapping configured on FortiManager Policy ID 1 for this managed FortiGate already exists on FortiManager in the policy package named Remote-FortiGate. The address object used in policy ID 1 already exists in the ADOM database with any as the interface association, and conflicts with the address object interface association locally on FortiGate . An administrator would like to create a policy on the Staging ADOM in backup mode, and install it on the FortiGate device in the same ADOM. How can the administrator perform this task? The administrator must change the ADOM mode to Advanced to bring the FortiManager online. The administrator must disable the FortiManager offline mode first. The administrator must use the Policy & Objects section to create a policy first. The administrator must use the FortiManager script. Given the configuration shown in the exhibit, what are two results from this configuration? (Choose two). The same administrator can lock more than one ADOM at the same time Concurrent read-write access to an ADOM is disabled. / It disables concurrent read-write access to an ADOM You can validate administrator login attempts through external servers Two or more administrators can make configuration changes at the same time, in the same ADOM. You are using the Quick Install option to install configuration changes on the managed FortiGate. Which two statements correctly describe the result? (Choose two.) It installs all the changes in the device database first and the administrator must reinstall the changes on the FortiGate device It provides the option to preview only the policy package changes before installing them. It installs device-level changes on the FortiGate device without launching the Install Wizard It installs provisioning templates changes on the FortiGate device. An administrator's PC crashes before the administrator can submit a workflow session for approval. After the PC is restarted, the administrator notices that the ADOM was locked from the session before the crash. How can the administrator unlock the ADOM? Log in as Super_User in order to unlock the ADOM Log in using the same administrator account to unlock the ADOM Restore the configuration from a previous backup Delete the previous admin session manually through the FortiManager GUI or CLI . An administrator configures a new OSPF route on FortiManager and has not yet pushed the changes to the managed FortiGate device. In which database will the configuration be saved? Configuration-level database Device-level database Revision history database ADOM-level database . What does a policy package status of Conflict indicate? The policy configuration has never been imported after a device was registered on FortiManager The policy package reports inconsistencies and conflicts during a Policy Consistency Check The policy package configuration has been changed on both FortiManager and the managed device independently. The policy package does not have a FortiGate as the installation target. . What will be the result of reverting to a previous revision version in the revision history? It will install configuration changes to managed device automatically It will modify the device-level database It will tag the device settings status as Auto-Update It will generate a new version ID and remove all other revision history versions . An administrator has created a firewall address object that is used in multiple policy packages for multiple FortiGate devices in an ADOM. After the installation operation is performed, which IP/netmask will be shown on FortiManager for this firewall address object? The FortiManager replaces the address object to none 0.0.0.0/0 10.0.5.0/24 192.168.1.0/24 . An administrator has enabled Service Access on FortiManager. What is the purpose of Service Access on the FortiManager interface? It allows FortiManager to determine the connection status of managed devices. It allows administrative access to FortiManager It allows third-party applications to gain read/write access to FortiManager It allows FortiManager to respond to requests for FortiGuard services from FortiGate devices . Refer to the exhibit. Which two statements about an ADOM set in Normal mode on FortiManager are true? It allows making configuration changes for managed devices on FortiManager panes It supports the FortiManager script feature. You cannot assign the same ADOM to multiple administrators. FortiManager automatically installs the configuration difference in revisions on the managed FortiGate . An administrator enabled workspace mode and now wants to delete an address object that is currently referenced in a firewall policy. What can the administrator expect to happen? FortiManager will replace the deleted address object with the none address object in the referenced firewall policy. FortiManager will temporary disable the status of the referenced firewall policy FortiManager will leave the address object empty. FortiManager will not allow the administrator to delete a referenced address object until the ADOM is locked . In the event that one of the secondary FortiManager devicæ fails, which action must be performed to return the FortiManager HA to a working state? Reboot the failed device to remove its IP from the primary device Reconfigure the primary device to remove the peer IP of the failed device Manually promote one of the working secondary devices to the primary role, and reboot the old primary device to remove the peer IP of the failed device. The FortiManager HA state transition is transparent to administrators and does not require any reconfiguration. According to the error message why is FortiManager failing to add the FortiAnalyzer device? The administrator must use the correct user name and password of the FortiAnalyzer device The administrator must use the Add Model Device section and discover the FortiAnalyzer device The administrator must select the Forti-Manager administrative access checkbox on the FortiAnalyzer management interface The administrator must turn off the Use Legacy Device login and add the FortiAnalyzer device to the same network as Forti-Manager. Which two items does an FGFM keepalive message include? (Choose two.) FortiGate uptime FortiGate license information FortiGate configuration checksum FortiGate IPS version . What is the advantage of using FortiManager to manage FortiAnalyzer? It allows FortilManager to run reports based on FortiAnalyzer It allows FortiManager to manage all FortiGate devices It allows FortiManager to store all managed FortiGate device logs It allows FortiManager to act as a collector and FortiAnalyzer device . An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package, Fortinet, in the custom ADOM1. What will happen to the Fortinet policy package? When the Fortinet policy package is created, it automatically assigns the global policies. When the Fortinet policy package is created, you can select the option to assign the global policies. When the Fortinet policy package is created, you need to reapply the global policy package to the ADOM. When the Fortinet policy package is created, you need to assign the global policy package from the global ADOM. Which two items are included in the FortiManager backup? (Choose two.) Flash configuration Firmware images FortiGuard database All devices . An administrator is about to add the FortiGate device to FortiManager using the discovery process. FortiManager is operating behind a NAT device, and the administrator configured the FortiManager NATed IP address under the FortiManager system administration settings. What is the expected result? During discovery, FortiManager sets the NATed device IP address on FortiGate During discovery, FortiManager sets both the FortiManager NATed IP address and NAT device IP address on FortiGate During discovery, FortiManager sets the FortiManager NATed IP address on FortiGate During discovery, FortiManager uses only the FortiGate serial number to establish the connection . An administrator is tasked with troubleshooting an issue with push updates failing on a FortiManager device that is located behind a NAT device. Which two settings should the administrator check? (Choose two.) That the external IP address on the NAT device is set to DHCP and configured with the virtual IP That the virtual IP address and correct ports are set on the NAT device That the override server IP address is set on FortiManager and the NAT device That the NAT device IP address and correct ports are configured on FortiManager . What is the purpose of the Policy Check feature on FortiManager? It provides recommendations to combine similar policy packages within an ADOM into one Single policy package. It compares the policy packages with the revision history, and updates policy packages in the ADOM database It provides recommendations for optimizing policies in a policy package It merges and creates dynamic mappings for duplicate objects used in a policy package . An adiministrator has configured the command shown in the exhibit on FortiManager. A configuration change has been installed from FortiManager to the managed FortiGate that causes the FGFM tunnel to go down for more than 15 minutes. What is the purpose of this command? It allows the FortiManager to revert and install a previous configuration revision on the managed FortiGate. It allows FortiGate to reboot and restore a previously working firmware image It allows FortiGate to unset central management settings It allows FortiGate to reboot and recover the previous configuration from its configuration file . Given the configuration shown in the exhibit, which two statements are true? (Choose two.) FortiManager is in workflow mode The FortiManager ADOM is locked by the administrator An administrator can also lock the Local-FortiGate-1 policy package The FortiManager ADOM mode is set to Normal . Which two statements are true if the script is executed using the Device Database option? (Choose two.) The script history will show successful installation of the script on the remote FortiGate The successful execution of a script on the Device Database will create a new revision history You must install these changes using the Install Wizard to a managed device The Device Settings Status will be tagged as Modified. An administrator would like to create three ADOMs on FortiManager with different access levels based on departments. What can you comclude from the design shown in exhibit? (choose two) The administrator must set the FortiManager ADOM mode to advanced Admin a can access vdom2 and vdom3 with the super profile The administrator must configure FortiManager in workspace The FortiManager policies and objects database can be shared between the Financial and HR ADOMs. . An administrator logs into the FortiManager GUI and sees the panes shown in the exbibit. Which two reasons can explain why the FortiAnalyzer feature panes do not appear? (Choose two) FortiAnalyzer features are not enabled on FortiManager The administrator profile does not have full access privileges like the Super_User profile The administrator logged in using the unsecure protocol HTTP, so the view is restricted The administrator IP address is not a part of the trusted hosts configured on FortiManager interfaces. An administrator with the Super _ User profile is unable to log in to FortiManager because of an authentication failure message. Which troubleshooting step should you take to resolve the issue Make sure FortiManager Access is enabled in the administrator profile Make sure Offline Mode is disabled Make sure the administrator IP address is part of the trusted hosts. Make sure ADOMs are enabled and the administrator has access to the Global ADOM . Which two statements about the scheduled backup of FortiManager are true? (Choose two.) It does not back up firmware images saved on FortiManager. It can be configured using the CLI and GUI. It backs up all devices and the FortiGuard database. It supports FTP, SCP, and SFTP. Which configuration setting for FortiGate is part of a device-level database on FortiManager? VIP and IP Pools Firewall policies. Security profiles Routing. An administrator is having trouble when trying to add FortiGate using the Add Device wizard on FortiManager. Which two options can be used to troubleshoot this issue? (Choose two.) Make sure Offline Mode is disabled. A configuration sync failure Make sure UDP port 541 between FortiManager and FortiGate is allowed. Make sure FMG-Access on the FortiGate interface facing FortiManager is enabled. Which two Security Fabric features exist on FortiManager? (Choose two.) Enables you to view and renew Security Fabric licenses for FortiGate devices. Enables you to run security ratings on FortiGate devices. Enables you to view the logical and physical topology of Security Fabric devices. Enables you to view the security ratings of FortiGate Security Fabric groups. View the following exhibit An administrator is importing a new device into FortiManager and has selected the options shown in the exhibit. What will happen if the administrator makes the changes and installs the modified policy package on this managed FortiGate? The unused objects that are not tied to the firewall policies will remain as read-only locally on FortiGate. The unused objects that are not tied to the firewall policies in the policy package will be deleted from the FortiManager database. The unused objects that are not tied to the firewall policies locally on FortiGate will be deleted. The unused objects that are not tied to the firewall policies will be installed on FortiGate. An administrator is configuring a new Restricted Admin profile. Which two permissions can the administrator configure? (Choose two.) IPS sensor Web Filter profile Device registration FortiGuard configuration. How does FortiManager determine if a managed device Sync Status is Out-of-Sync? It compares the device-level database with the FortiGate configuration. It compares the provisioning template with the FortiGate configuration. It compares the current revision history with the FortiGate configuration. It compares the ADOM-level database with the FortiGate configuration. What is the purpose of dynamic objects? To merge duplicate objects automatically To map a single logical object to a unique definition per device To update the object’s CLI syntax automatically based on the ADOM version. To map the same object automatically across multiple ADOMs. Which two scripting languages are supported by FortiManager (Choose two.) Tool Command line (TCL) Perl Command Line Interface (CLI) Python. What must you specify when you configure an SD-WAN using central management? At least two member interfaces At least four member interfaces A Fortinet SD-WAN license At least one member interface. Which command can be used to sniffer the FGFM protocol communication between FortiManager and FortiGate? diagnose sniffer packet any "port 443" 4 diagnose sniffer packet any "port 541" 4 diagnose sniffer packet any "port 80" 4 diagnose sniffer packet any "port 8113" 4. When adding a new device using the model device option, which methods are available to link the model device to the real device? IP address and pre-shared key Model number and hostname. Serial number and pre-shared key Hostname and certification authentication. Which two settings must be configured for SD-WAN Central Management? (Choose two.) SD-WAN must be enabled on per-ADOM basis You can create multiple SD-WAN interfaces per VDOM When you configure an SD-WAN, you must specify at least two member interfaces. The first step in creating an SD-WAN using FortiManager is to create two SD-WAN firewall policies. What are two outcomes of ADOM revisions? (Choose two.) ADOM revisions can significantly increase the size of the configuration backups. ADOM revisions can save the current size of the whole ADOM ADOM revisions can create System Checkpoints for the FortiManager configuration ADOM revisions can save the current state of all policy packages and objects for an ADOM. An administrator with the Super_User profile is unable to log in to FortiManager because of an authentication failure message. Which troubleshooting step should you take to resolve the issue? Make sure FortiManager Access is enabled in the administrator profile Make sure Offline Mode is disabled Make sure the administrator IP address is part of the trusted hosts. Make sure ADOMs are enabled and the administrator has access to the Global ADOM. Which two conditions trigger FortiManager to create a new revision history? (Choose two.) When FortiManager is auto-updated with configuration changes made directly on a managed device When changes to the device-level database are made on FortiManager When FortiManager installs device-level changes on a managed device Most Voted When a configuration revision is reverted to a previous revision in the revision history. An administrator would like to create an SD-WAN using central management in the Training ADOM. To create an SD-WAN using central management, which two steps must be completed? (Choose two.) Specify a gateway address when you create a default SD-WAN static route Enable SD-WAN central management in the Training ADOM Configure and install the SD-WAN firewall policy and SD-WAN static route before installing the SD-WAN template settings Remove all the interface references such as routes or policies that will be a part of SD-WAN member interfaces. Refer to the exhibit. You are using the Quick Install option to install configuration changes on the managed FortiGate. Which two statements correctly describe the result? (Choose two.) It will not create a new revision in the revision history It installs device-level changes to FortiGate without launching the Install Wizard It cannot be canceled once initiated and changes will be installed on the managed device It provides the option to preview configuration changes prior to installing them. An administrator run the reload failure command: diagnose test deploy manager reload config <deviceid> on FortiManager. What does this command do? It downloads the latest configuration from the specified FortiGate and performs a reload operation on the device database. It installs the latest configuration on the specified FortiGate and update the revision history database. It compares and provides differences in configuration on FortiManager with the current running configuration of the specified FortiGate It installs the provisioning template configuration on the specified FortiGate . An administrator configures a new firewall policy on FortiManager and has not yet pushed the changes to the managed FortiGate. In which database will the configuration be saved? Device-level database Revision history database ADOM-level database Configuration-level database. Which of the following statements are true regarding VPN Manager? (Choose three.) VPN Manager must be enabled on a per ADOM basis. VPN Manager automatically adds newly-registered devices to a VPN community. VPN Manager can install common IPsec VPN settings on multiple FortiGate devices at the same time. Common IPsec settings need to be configured only once in a VPN Community for all managed gateways. VPN Manager automatically creates all the necessary firewall policies for traffic to be tunneled by IPsec. An administrator would like to create an SD-WAN default static route for a newly created SD-WAN using the FortiManager GUI. Both port1 and port2 are part of the SD-WAN member interfaces. Which interface must the administrator select in the static route device drop-down list? port2 virtual-wan-link port1 auto-discovery. An administrator would like to authorize a newly-installed AP using AP Manager. What steps does the administrator need to perform to authorize an AP? Authorize the new AP using AP Manager and wait until the change is updated on the FortiA   Changes to the AP's state do not require installation. Changes to the AP's state must be performed directly on the managed FortiGate. Authorize the new AP using AP Manager and install the policy package changes on the managed FortiGate. Authorize the new AP using AP Manager and install the device level settings on the managed FortiGate. What does a policy package status of Modified indicate? FortiManager is unable to determine the policy package status The policy package was never imported after a device was registered on FortiManager The Policy configuration has been changed on a managed device and changes have not yet been imported into FortiManager The Policy package configuration has been changed on FortiManager and changes have not yet been installed on the managed device. Which configuration setting for FortiGate is part of an ADOM-level database on FortiManager? NSX-T Service Template Security profiles SNMP Routing. Refer to the exhibit An administrator has created a firewall address object, Local, which is used in the Remote-FortiGate policy package. When the installation operation is performed, which IP/Netmask will be installed on Remote-FortiGate, for the Local firewall address object? 192.168.5.0/24 Remote-FortiGate will automatically choose an IP/netmask based on its network interface settings. 10.0.2.0/24 It will create the Local and Remote-Local firewall address objects on Remote-FortiGate with 192.168.5.0/24 and 10.0.2.0/24 values. An administrator, Trainer, who is assigned the Super_User profile, is trying to approve a workflow session that was submitted by another administrator, Student. However, Trainer is unable to approve the workflow session. What can prevent an admin account that has Super_User rights over the device from approving a workflow session? A. Trainer Trainer must first create their own workflow session to approve student session. Trainer is not a part of workflow approval group. Trainer must close Student’s workflow session before approving the request. Trainer does not have full rights over this ADOM. Refer to the exhibit. Given the configuration shown in the exhibit, what can you conclude from the installation targets in the Install On column? (Choose two.) Policy 3 will be installed on all FortiGate devices and vdom belongs to the ADOM. Policy seq.# 3 will be skipped because no installation targets are specified. Policy seq.# 3 will be installed on all managed devices and VDOMs that are listed under Installation Targets. Policy seq.# 2 will not be installed on the Local-FortiGate root VDOM because there is no root VDOM in the Installation Target. Policy seq # 1 will be installed on the Remote-FortiGate root [NAT] and Student[NAT] VDOMs only.

Report abuse