SIMULATION -
You are a functional consultant for a company named Contoso Entertainment System USA (USMF).
From sales order number 000720, you need to ensure that a product named Projector Television is delivered directly to a customer.
To complete this task, sign in to Dynamics 365 portal. When you configure Direct Delivery (direct from the Vendor), a PO is created to purchase the item from the Vendor and have it shipped directly to the customer.
The instructions below include generating the PO and a product receipt. These steps may not be required in the exam but are included for reference.
1. Go to Navigation pane > Modules > Accounts receivable > Orders > All sales orders.
2. Select New.
3. Search for and select sales order number 000720.
4. On the Action Pane, select Sales order, then select Direct delivery. The Create delivery page lists all the open sales order lines as copied from the sales order.
5. Select the sales order line for the product named Projector Television.
6. The Vendor account field will be populated. A message informs you that the purchase order has now been created.
7. Expand the Line details section.
8. Select the Delivery tab and verify that the Direct delivery field is set to Yes.
9. On the Action Pane, select General.
10. Select Related orders.
11. Select the link in the Purchase order field.
12. Expand the Line details section and select the Address tab.
✑ The delivery address for this purchase order line is the customer's delivery address and not your company's address.
13. Select the Delivery tab.
✑ Like the sales order line, the associated purchase order line type is also set to Direct delivery.
14. On the Action Pane, select Purchase.
15. Select Confirmation.
16. Select OK.
17. On the Action Pane, select Receive.
18. Select Product receipt.
19. In the Product receipt field, type a value.
20. Select OK.
21. On the Action Pane, select General.
22. Select Related orders and highlight the desired record.
✑ After the purchase order has been updated as received, or in other words, after the vendor has shipped the goods to your customer's address, the status of the originating sales order is automatically updated to Delivered.
✑ The sales order can now be invoiced.
23. Select OK.
24. Close the page.
25. Select OK. Close the pages and return to the home page. SIMULATION -.
SIMULATION -
You are a functional consultant for a company named Contoso Entertainment System USA (USMF).
You perform a manual inventory count and discover that item number T0003 has an inventory count of 230 units.
You need to adjust the inventory to reflect the manual count.
To complete this task, sign in to Dynamics 365 portal.
There are several ways to update the inventory. You can use one of the inventory adjustment journals or you can use the quantity adjust functionality to adjust the
Quantity of Inventory from the 'On hand inventory' form.
1. Navigate to Product Information management > Products > Released Product
2. In the Released Product form, select item number T0003.
3. On the Manage Inventory action tab, click the 'On Hand inventory' button.
4. On 'On Hand inventory' you can check available quantity.
5. Click the Quantity adjustment button to adjust the quantity.
6. In the Quantity field, specify the quantity 230.
7. Once the quantity has been specified click on OK button.
8. Now you can check adjusted quantity on 'On Hand Inventory' form. Correct Answer: See explanation below.
DRAG DROP -
A company is implementing inventory by using Dynamics 365 Supply Chain Management.
You need to set up inventory journals and ensure that they are used for the correct processes.
Which journal types should you use? To answer, drag the appropriate journal types to the correct actions. Each journal type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place: Counting- Transfer- Adjustment Counting- Adjustment- Transfer Transfer- Counting- Adjustment.
A company is implementing sales order functionality in Dynamics 365 Supply Chain Management.
The company has a business requirement to fulfill sales orders by using direct delivery.
You need to enter a direct delivery sales order so that a purchase order is automatically created.
What should you do after you enter the sales order and lines? A. Set the ship complete toggle to On and confirm the order on the sales order header. B. Select automatic and confirm the sales order on the line level setup tab in the reservation field. C. Change the site to direct delivery and confirm the sales order. D. Select the direct delivery option under the sales order action pane and complete the form.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company is implementing inventory management in Dynamics 365 Supply Chain Management.
The company needs to block inventory and ensure that physical inventory will not be reserved by other outbound transactions.
You need to select the appropriate option to block the inventory in the system.
Solution: Select the full blocking option in the item sampling page.
Does the solution meet the goal? A. Yes B. No.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company is implementing inventory management in Dynamics 365 Supply Chain Management.
The company needs to block inventory and ensure that physical inventory will not be reserved by other outbound transactions.
You need to select the appropriate option to block the inventory in the system.
Solution: Create a quality order on the quality orders page for the quantity to be blocked.
Does the solution meet the goal? A. Yes B. No.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company is implementing inventory management in Dynamics 365 Supply Chain Management.
The company needs to block inventory and ensure that physical inventory will not be reserved by other outbound transactions.
You need to select the appropriate option to block the inventory in the system.
Solution: Manually create a transaction on the inventory blocking page.
Does the solution meet the goal? A. Yes B. No.
HOTSPOT -
Inventory in a warehouse is assigned to an inventory status of available.
You need to set up an inventory status for damaged items so that they are not sold to customers.
Which values should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area: 1-1 1-2 3-1 2-3.
A company plans to stock new items and value those items by using FIFO principle. The company has multiple sites set up. There are multiple warehouses for each site.
You must be able to view the value and quantity of these items at each warehouse.
You need to apply FIFO costing per warehouse.
How should you complete the costing setup? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area: 2-3 1-3 3-2 4-3.
SIMULATION -
You are a functional consultant for a company named Contoso Entertainment System USA (USMF).
You need to configure a new quality process for item number M0017. The process must meet the following requirements:
✑ Perform an impedance test on 100 percent of the units purchased.
✑ Initiate the test after the product receipt is posted.
To complete this task, sign in to Dynamics 365 portal.
Configure Item Sampling to specify 100 percent of the units.
Configure Quality Association to specify what test to run and configure the test to run after the receipt is posted.
Configure Item Sampling.
1. Go to Inventory management > Setup > Quality control > Item sampling.
2. Click New.
3. In the Item sampling field, type the name 100%.
4. In the Description field, type a value (100%).
5. In the Quantity specification field, select percent.
6. In the Value field, enter a number (100)
7. Click Save.
8. Close the page.
Configure a Quality Association -
1. Go to Inventory management > Setup > Quality control > Quality associations.
2. Click New.
3. In the Reference type field, select Purchase.
4. In the Item code field, select Table.
5. In the Item field, select the item M0017.
6. In the Event type field, select Product Receipt.
7. In the Execution field, select After.
8. Expand or collapse the Specifications section.
9. In the Test group field, find and select the Impedance test.
10.Click Save.
11.Close the page. 11.Close the page.
DRAG DROP -
A company implements warehouse locations in Dynamics 365 Supply Chain Management.
You need to configure location directives for inventory movement.
Which configurations should you use? To answer, drag the appropriate strategies to the correct requirements. Each strategy may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place: 1-2-3 2-1-3 3-2-1 1-3-2.
DRAG DROP -
You are the quality supervisor for a company. You receive 100 units of item C0001.
You find defects in some units. You move the items to quarantine for further inspection. Fifty units fail inspection.
You need to scrap the defective units.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place: 4-1-3-2 4-2-3-1 2-4-1-3 3-1-4-5.
HOTSPOT -
A company sells a new product line. Buyers purchase a large shipment into the distribution center.
The product must be divided among the retail stores equally.
You need to configure buyer push functionality.
Which configuration options should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area: 3-1 1-3 2-4 4-3.
DRAG DROP -
You are implementing Dynamics 365 Supply Chain Management.
A user reports that some of the quarantine statuses appear to mean the same thing.
You need to explain the status of quarantine orders by the location of the item.
What is the status of the orders based on the location of the item? To answer, drag the appropriate statuses to the correct steps. Each status may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place:
2-3-4 3-2-1 4-2-1 3-2-4.
A company runs out of inventory in warehouse 22 but has overstock in warehouse 11. The warehouses are linked to the same site.
The inventory must be moved from warehouse 11 to warehouse 22. The company must retain ownership of the inventory financially and be able to generate reports as to where the inventory value resides at all times.
You need to create an order to move the stock.
What should you do? A. Create a transfer order from the transit warehouse to warehouse 22. B. Create a transfer order from warehouse 11 to the transit warehouse. C. Create a transfer order from warehouse 11 to warehouse 22. D. Create a sales order for warehouse 11 and a purchase order for warehouse 22.
HOTSPOT -
A company must ship product from one warehouse, receive it in another, and account for the inventory. It will take two days for the shipment to travel between locations.
You need to set up and process the transfer between the two warehouses.
How should you complete the setup? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area: 1-2 3-2 1-3 2-4.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company is implementing inventory management in Dynamics 365 Supply Chain Management.
The company needs to block inventory and ensure that physical inventory will not be reserved by other outbound transactions.
You need to select the appropriate option to block the inventory in the system.
Solution: Configure a blocking cause in the inventory setup configuration.
Does the solution meet the goal? A. Yes B. No.
DRAG DROP -
A company uses Dynamics 365 Supply Chain Management.
You need to perform month-end close processes.
At which process steps should you perform the actions? To answer, drag the appropriate process steps to the appropriate actions. Each process step may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Select and Place: 1-2-3-4-5 3-1-2-5-4 5-4-2-1-3 2-3-1-4-5.
A company uses Dynamics 365 Supply Chain Management.
An employee notices a discrepancy in inventory.
You need to create the inventory blocking transaction.
What are two possible ways to achieve the goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point. A. inventory status B. quality order C. batch disposition code D. manual inventory blocking.
A company uses Dynamics 365 Supply Chain Management.
Orders are reserved against open purchase orders that have not yet been received. As a result, there are issues prioritizing deliveries, which is causing backorders on both sales orders and transfer orders.
Negative inventory is not currently allowed.
Product reservations must be performed against physical stock only.
You need to update the configuration for product reservations.
What should you do? A. Clear the Reserve Items Automatically check box for transfers. B. Clear the Reserve Ordered Items check box. C. Select the Auto batch reservations check box. D. Select the Physical negative inventory check box.
A company has revenue items that generate high, medium, or low revenue.
You need to configure ABC classifications as follows:
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point. A. Define highest, middle, and lowest ABC values as percentages B. Define highest, middle, and lowest ABC values as amounts C. Select ABC model of revenue D. Define internal interest in percentage E. Select ABC model of value.
HOTSPOT -
All items that a company purchases from a specific vendor arrive with defects.
You need to automatically generate quality orders for all items when the products are physically received from the vendor, and product receipts are issued.
How should you configure the quality association? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area: 2-1-3-1 2-3-1-2 3-2-3-1 4-2-3-1.
A company plans to run their profit and loss statements by using the site storage dimension.
If the site is changed on sales order, purchase order, or other source document, a mismatch is created between financial and storage dimensions. This leads to incorrect profit and loss reporting.
You need to ensure that the financial dimension updates when the site storage dimension changes.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point. A. Lock the dimension link. B. Associate the financial dimension hierarchy with the storage dimension hierarchy in the organization chart. C. On the storage dimension site setup screen, select Default inventory status ID. D. Associate the site storage dimension with the site financial dimension. E. Activate the dimension link.
A company uses Dynamics 365 Supply Chain Management.
Products must automatically be classified based on the company's objectives and priorities.
You need to create the ABC model.
Which three ABC codes should you configure? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point. A. Margin B. Cost C. Revenue D. Profit E. Value.
You are the materials manager at a distribution company.
You are responsible for setting up the ABC classification of all items as follows:
✑ Class A materials represent 70 percent of the material value.
✑ Class B materials represent 20 percent of the material value.
✑ Class C materials represent 10 percent of the material value but are the most commonly used.
You need to assign an ABC classification value model to all items using those values.
What should you do? A. Run the ABC classification report B. Run the ABC classification periodic task to update the value model for all items C. Manually update the Value classification on the Released product record D. Run the ABC classification periodic task to update the revenue model for all items.
DRAG DROP -
You are the sales manager at a distribution company.
You have a drop-ship order for a batch of chemicals that will go directly from your vendor to your customer.
You need to create and process this direct delivery within Dynamics 365 Supply Chain Management.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place: 4-3-5 3-2-5 3-1-4 3-5-2.
HOTSPOT -
An inventory control clerk manages adjustments in inventory.
Some adjustments have a cost impact. Other adjustments must be posted to a specific ledger account or must be registered in inventory.
You need to configure the system.
Which journal types should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area: 3-1-2 1-1-3 2-1-3 2-3-1.
A company employee is in charge of warehouse operations and controlling inventory adjustments through journals.
The employee needs to add inventory for samples at a specific cost. The samples were shipped by a vendor without a purchase order. The employee needs to be sure that the inventory value goes to a ledger account so that the value of the samples is not mixed in with other inventory value.
You need to ensure that the employee is able to correctly add the inventory.
What should you do? A. Create a movement journal, add the cost, and specify the offset ledger account on the line. B. Create an adjustment journal, add the cost, and specify the offset ledger account on the line. C. Create an arrival journal, add the cost, and specify the offset ledger account on the line. D. Create a transfer journal, transfer to a different warehouse, and then adjust the cost.
DRAG DROP -
You are the inventory manager for a distribution center. You are configuring the inventory breakdown for a new center in California.
You need to set up warehouse locations for the center and configure the prerequisite inventory hierarchy.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place: 1-6-5-2 3-2-6-4 4-2-1-5 2-3-5-1.
DRAG DROP -
During a company's busy season, the sales team experiences multiple backorders.
The company wants to use forecasting to determine seasonal buying trends.
You need to define the setup and data set required for forecasting.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place: 2-5-4-1 3-2-4-1 5-3-4-2 4-1-2-3.
HOTSPOT -
A company sells vehicles and performs multiple quality checks on them while in production.
The company receives a customer complaint about a 2019 vehicle that has leaks around the windows and door seals.
You need to block inventory on these vehicles and perform quality tests to ensure that there are no leaks.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area: 1-1 1-2 2-3 3-4.
A company uses Dynamics 365 Supply Chain Management to manage inventory.
The company realizes that there is an incorrect inventory amount for Item 33442 in Warehouse 1.
You need to correct the inventory amount by using the posting setup configured on the item group.
Which two journal types achieve the goal? Each correct selection provides a complete solution.
NOTE: Each correct selection is worth one point. A. Inventory adjustment journal B. Inventory transfer journal
C. Inventory movement journal D. Inventory counting journal.
DRAG DROP -
A company opens a new warehouse facility.
You need to receive items on a transfer order by using an arrival overview.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place: 5-4-2-1-3 1-3-2-5-4 3-2-4-1-5 2-4-3-5-1.
You use Dynamics 365 Supply Chain Management to manage inventory.
You need to adjust inventory and override the current item posting setup.
Which journal type should you use? A. inventory adjustment B. inventory transfer C. movement D. item arrival.
SIMULATION -
You are a functional consultant for a company named Contoso Entertainment System USA (USMF).
You plan to manage safety stock level.
You need to configure a minimum stock level of 1,500 units for an item named StandardSpeakerUpSel in warehouse number 13.
To complete this task, sign in to Dynamics 365 portal. Select Product information management > Products > Released products and then select the product (StandardSpeakerUpSel), and then on the Action Pane, in the Plan tab, in the Coverage group, select Item coverage to open the Item coverage page.
Select Min/Max in for the Coverage code and enter the value 1,500 for the Minimum value. Select Min/Max in for the Coverage code and enter the value 1,500 for the Minimum value.
HOTSPOT
-
A company uses Dynamics 365 Supply Chain Management with advanced warehouse capabilities. Warehouse workers use mobile devices. High value stocked items are classified as A items and are stocked in different locations in the warehouse.
The accounting department requires that all A items be counted weekly. If there are any inconsistencies, the A items must be counted a second time prior to posting the counts.
You need to configure the system to meet the requirements.
What should you configure for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point. 2-3 1-2 3-1 3-2.
HOTSPOT
-
A company is implementing Dynamics 365 Supply Chain Management. Inventory is valued through FIFO costing.
The company is preparing for cutover and go-live activities. The accounting manager wants to ensure that on-hand inventory is brought into Dynamics 365 Supply Chain Management at the correct cost.
ItemA has the following costing tiers:
• Tier 1: 20 each, $5
• Tier 2: 20 each, $10
• Tier 3: 20 each, $15
You need to configure the item and journals to meet the cutover requirement.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point. 1-3 2-1 2-3 3-1.
A company uses the nonconformance functionality in Dynamics 365 Supply Chain Management.
When a manufactured part fails a quality test, a quality clerk creates a nonconformance. You determine that additional items are needed to correct the issue.
You must record the additional items for the nonconformance.
What should you do? A. Reject the nonconformance and add the items to the quality order. B. Reject the nonconformance and add a related operation. C. Approve the nonconformance and add the items to the quality order. D. Approve the nonconformance and add a related operation.
A company that uses Dynamics 365 Supply Chain Management recently became ISO 9001-certified.
The company must begin documenting nonconformances.
You need to configure the nonconformance functionality.
Which three features must you configure? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point. A. routes B. operations C. diagnostic types D. quality charges E. quarantine zones.
HOTSPOT
-
A company uses Dynamics 365 Supply Chain Management. Inventory is valued through FIFO costing.
The warehouse manager identifies item discrepancies and increases quantities in a counting journal. Finance then discovers that the cost on ItemA posted as zero dollars on the journal transaction.
You need to configure the system to ensure that the cost is populated on the transaction.
What should you configure? To answer, select the appropriate options in the answer area,
NOTE: Each correct selection is worth one point.
2-3 1-3 3-2 2-2.
HOTSPOT
-
A distribution company uses Dynamics 365 Supply Chain Management.
A customer contacts the company to identify a defect in an ordered part. Additional quantities of the defective item are in stock. The defective items require a task that will trigger an action for the items and a label printed.
You need to configure the system.
Which features should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point. 1-1 2-3 3-4 1-3.
HOTSPOT
-
A frozen food distribution company is implementing Dynamics 365 Supply Chain Management.
The warehouse manager wants to ensure that after items are picked, a temperature check is performed and verified on the items before shipment to customers. The temperature check must fall within a specific temperature range to pass.
You need to configure the system.
Which components should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point. 1-1 2-3 1-2 3-1.
A warehouse uses mobile devices for locating products.
Products are listed in the Inventory module in incorrect locations. Users must therefore manually locate products to be picked.
You need to ensure that the users’ mobile device updates the locations of the products.
Which two actions should you take to update product locations by using the mobile devices? Each correct answer presents part of the solution.
A. Manually move product to the correct physical location. B. Log into a desktop computer and update the Inventory module. C. Manually find the physical location of the product. D. Scan a shelf barcode and update the inventory.
HOTSPOT
-
A distribution company uses Dynamics 365 Supply Chain Management.
A high-volume warehouse for the distribution company automatically releases transfer order lines to the warehouse throughout the day.
Order line quantities are frequently changed after release to the warehouse. However, the load lines are not always updated.
You need to configure automatic updates to the load lines.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point. 1-1 2-3 3-1 1-3.
HOTSPOT
-
A food distribution company is implementing Dynamics 365 Supply Chain Management without the Warehouse management module.
The company sells prepackaged meals purchased from one or more vendors. The prepackaged meals contain a single item number. The vendors routinely communicate that lots of prepackaged meals be held if any risk of exposure is identified until they can confirm safe handling per lot. This created supply chain issues because the items are in inventory and therefore not reordered.
You need to resolve the issues.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point. 1-1 2-3 4-1 1-3.
HOTSPOT
-
A company uses Dynamics 365 Supply Chain Management. The company has multiple shrink wrap machines on the shipping dock.
An older shrink wrap machine has a unique vibration. The older machine must be inspected frequently and measured against the vibration and performance of other machines.
You need to configure the following requirements for the aging shrink wrap machine:
• Inspect the older machine frequently.
• Measure results against other machines.
What should you configure for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
4-1 2-3 1-3 3-1.
A cement manufacturing company uses Dynamics 365 Supply Chain Management. The company has two manufacturing plants. On average, each production plant produces 300,000 bags of cement before it must shut down for maintenance.
The production controller must allocate the required resources during the maintenance period.
You need to configure the system to meet the controller’s requirements.
Which two options should you configure? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. Attributes B. Counters C. Maintenance plans D. Asset service levels E. Maintenance requests.
Case study -
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study -
To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Background -
Trey Research is a multinational manufacturer of health and dietary supplements based in Seattle, Washington. The company is experiencing a rapid expansion not only in its supplements but as a lifestyle brand that also sells apparel. The supplements and apparel businesses operate independently but manufacture and operate in the same legal entity.
Current environment -
Current environment. Technology -
Trey Research is migrating from an outdated, on-premises version of Dynamics AX to Dynamics 365 Supply Chain Management. The company wants to retain a lot of its current data structures and processes but adopt new efficiencies when the benefit is obvious. The company uses a third-party e-commerce site that is custom developed by an internal developer.
Current environment. Items -
Product numbering -
All items are numbered by using a smart numbering format: [Product SKU+Size+Color+Style]. For reporting, items are queried for sales and inventory reports by using the first six digits of the item number or until the first dash is encountered.
• A t-shirt could be 01001-S-Red for item 1001 in a size small with the color red.
• A single energy drink could be 02001-12oz or 02001-20oz for the different sizes that product 02001 is sold in.
Product attributes -
• All clothing shares the same set of product attributes.
• Supplements may share the same Product SKU but can have different attributes for the different size, color, or style variations of the product.
• Product attributes that are unnecessary for an item should be excluded from the item.
Pricing -
• All items always have a default price. This price will not expire.
• An item will have four different prices created for it every month, one for each customer tier, as detailed later in this section. The pricing expires at the end of the month. If no special pricing is created, the default item price will be used.
• The monthly sales price in which the additional price breaks are determined is based on the estimated cost of the manufactured items.
• Customers are categorized into four pricing tiers (A, B, C, and D) based on sales volume over the past 12 months.
• Customers can negotiate special pricing for items in 30-day, 60-day, and 90-day increments. Quantity restrictions may be placed, depending on the item discount and promotion.
• Promotional pricing is not used today. Pricing is restricted to monthly prices and customer-specific contract pricing.
Cost -
Items use a FIFO costing model today in their current Dynamics AX 2009 environment; however, using the FIFO costing method has created problems.
Current environment. Warehouse and inventory
• Warehouse requirements are simplistic. There is only one site. The site has two warehouses.
• Trey Research needs to make sure that any energy drinks and nutritional supplements are manufactured and packaged with the highest standards. Trey Research automatically inspects products when all products are reported as finished. All products are inspected again when the items are picked.
• Energy drinks require independent tests to check for dents in packaging, carbonation levels, and fill level.
• Nutritional supplements require separate tests for packaging, expiration date, product seal, and product labeling.
• Government compliancy and consistency testing are handled outside of the Enterprise Resource Planning (ERP) system.
• Resalable products are placed on one of two racks in the warehouse.
Requirements -
Requirements. Technology -
• Trey Research will integrate all pricing and discount capabilities to its e-commerce website.
Requirements. Items -
• Reporting on products should be streamlined as much as possible.
• The item numbering does not have to equate to the actual item number.
• The future costing methods adopted must be commonly accepted for manufacturers.
• Inventory costing should be done after a full inventory valuation is complete. It should take into consideration the direct materials, direct labor, and overhead that goes into an item.
• Any costing method used needs the ability to track cost records about an item, cost categories, and calculation formulas for indirect costs.
• The profitability for nutritional supplements manufacturing processes needs to be expressed in terms of the cost categories for routing operations and the calculation formulas for manufacturing overheads.
• If a vendor can no longer deliver the raw materials for the energy drinks due to supply chain issues, the costs for using an alternative vendor to source the raw materials should be used to determine the impact on profits.
• Apparel items will not be upgraded to the new costing method until after the go-live date due to resourcing and implementation limitations from the apparel team.
Requirements. Pricing -
• Trey Research plans to do promotional pricing. Certain products will receive special pricing during the hours of extreme sporting events that Trey Research sponsors. Before or after the event, normal pricing will resume.
Requirements. White labeling -
• Trey Research wants to start white labeling its products under the brands of major nutritional retail store brands. These products would only be sold to specific customers.
• Trey Research will provide and maintain a 'Compare to' price for customers to use to compare the white-labeled products. This Compare to price will also be the default item price for the customer if the customer accidentally lets a contract price expire.
• The configuration of these restrictions must be applied automatically when creating new products for those customers.
Requirements. Warehouse and inventory
• If products in the warehouse must be blocked from transactions for a specific reason, such as a health and safety review, warehouse users should be able to block the products quickly from the ERP system.
• All product quality tests should be processed in a uniform and consistent manner.
• Creation of any quality processes for products inbound to the warehouse, from the production line, or outbound from the warehouse to consumers should be automatically created to facilitate execution.
• Testing requirements:
◦ Requirement 1: 100 percent of all nutritional supplements and 50 percent of all energy drinks must be tested when production orders are completed. After a product is in testing, 100 percent of all tests must be completed.
◦ Requirement 2: 75 percent of all nutritional supplements and energy drinks should be tested against their required tests during an outbound process.
◦ Damaged products must be placed in one of four bins (based on product type) during the inspection process.
◦ You must define quarantine zones to optimize product visibility throughout the testing process.
You need to define the number of quarantine zones.
How many should you define? A. 1 B. 2 C. 4 D. 6 E. 8.
Case study -
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study -
To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Background -
Trey Research is a multinational manufacturer of health and dietary supplements based in Seattle, Washington. The company is experiencing a rapid expansion not only in its supplements but as a lifestyle brand that also sells apparel. The supplements and apparel businesses operate independently but manufacture and operate in the same legal entity.
Current environment -
Current environment. Technology -
Trey Research is migrating from an outdated, on-premises version of Dynamics AX to Dynamics 365 Supply Chain Management. The company wants to retain a lot of its current data structures and processes but adopt new efficiencies when the benefit is obvious. The company uses a third-party e-commerce site that is custom developed by an internal developer.
Current environment. Items -
Product numbering -
All items are numbered by using a smart numbering format: [Product SKU+Size+Color+Style]. For reporting, items are queried for sales and inventory reports by using the first six digits of the item number or until the first dash is encountered.
• A t-shirt could be 01001-S-Red for item 1001 in a size small with the color red.
• A single energy drink could be 02001-12oz or 02001-20oz for the different sizes that product 02001 is sold in.
Product attributes -
• All clothing shares the same set of product attributes.
• Supplements may share the same Product SKU but can have different attributes for the different size, color, or style variations of the product.
• Product attributes that are unnecessary for an item should be excluded from the item.
Pricing -
• All items always have a default price. This price will not expire.
• An item will have four different prices created for it every month, one for each customer tier, as detailed later in this section. The pricing expires at the end of the month. If no special pricing is created, the default item price will be used.
• The monthly sales price in which the additional price breaks are determined is based on the estimated cost of the manufactured items.
• Customers are categorized into four pricing tiers (A, B, C, and D) based on sales volume over the past 12 months.
• Customers can negotiate special pricing for items in 30-day, 60-day, and 90-day increments. Quantity restrictions may be placed, depending on the item discount and promotion.
• Promotional pricing is not used today. Pricing is restricted to monthly prices and customer-specific contract pricing.
Cost -
Items use a FIFO costing model today in their current Dynamics AX 2009 environment; however, using the FIFO costing method has created problems.
Current environment. Warehouse and inventory
• Warehouse requirements are simplistic. There is only one site. The site has two warehouses.
• Trey Research needs to make sure that any energy drinks and nutritional supplements are manufactured and packaged with the highest standards. Trey Research automatically inspects products when all products are reported as finished. All products are inspected again when the items are picked.
• Energy drinks require independent tests to check for dents in packaging, carbonation levels, and fill level.
• Nutritional supplements require separate tests for packaging, expiration date, product seal, and product labeling.
• Government compliancy and consistency testing are handled outside of the Enterprise Resource Planning (ERP) system.
• Resalable products are placed on one of two racks in the warehouse.
Requirements -
Requirements. Technology -
• Trey Research will integrate all pricing and discount capabilities to its e-commerce website.
Requirements. Items -
• Reporting on products should be streamlined as much as possible.
• The item numbering does not have to equate to the actual item number.
• The future costing methods adopted must be commonly accepted for manufacturers.
• Inventory costing should be done after a full inventory valuation is complete. It should take into consideration the direct materials, direct labor, and overhead that goes into an item.
• Any costing method used needs the ability to track cost records about an item, cost categories, and calculation formulas for indirect costs.
• The profitability for nutritional supplements manufacturing processes needs to be expressed in terms of the cost categories for routing operations and the calculation formulas for manufacturing overheads.
• If a vendor can no longer deliver the raw materials for the energy drinks due to supply chain issues, the costs for using an alternative vendor to source the raw materials should be used to determine the impact on profits.
• Apparel items will not be upgraded to the new costing method until after the go-live date due to resourcing and implementation limitations from the apparel team.
Requirements. Pricing -
• Trey Research plans to do promotional pricing. Certain products will receive special pricing during the hours of extreme sporting events that Trey Research sponsors. Before or after the event, normal pricing will resume.
Requirements. White labeling -
• Trey Research wants to start white labeling its products under the brands of major nutritional retail store brands. These products would only be sold to specific customers.
• Trey Research will provide and maintain a 'Compare to' price for customers to use to compare the white-labeled products. This Compare to price will also be the default item price for the customer if the customer accidentally lets a contract price expire.
• The configuration of these restrictions must be applied automatically when creating new products for those customers.
Requirements. Warehouse and inventory
• If products in the warehouse must be blocked from transactions for a specific reason, such as a health and safety review, warehouse users should be able to block the products quickly from the ERP system.
• All product quality tests should be processed in a uniform and consistent manner.
• Creation of any quality processes for products inbound to the warehouse, from the production line, or outbound from the warehouse to consumers should be automatically created to facilitate execution.
• Testing requirements:
◦ Requirement 1: 100 percent of all nutritional supplements and 50 percent of all energy drinks must be tested when production orders are completed. After a product is in testing, 100 percent of all tests must be completed.
◦ Requirement 2: 75 percent of all nutritional supplements and energy drinks should be tested against their required tests during an outbound process.
◦ Damaged products must be placed in one of four bins (based on product type) during the inspection process.
◦ You must define quarantine zones to optimize product visibility throughout the testing process.
You need to configure the system to automatically enforce inbound and outbound product requirements to and from the warehouse.
Which feature should you use?
A. quality associations
B. quality orders
C. quarantine zones
D. quality tests
E. nonconformances
Question #50Topic 3
HOTSPOT
-
Case study
-
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study
-
To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Background
-
Trey Research is a multinational manufacturer of health and dietary supplements based in Seattle, Washington. The company is experiencing a rapid expansion not only in its supplements but as a lifestyle brand that also sells apparel. The supplements and apparel businesses operate independently but manufacture and operate in the same legal entity.
Current environment
-
Current environment. Technology
Trey Research is migrating from an outdated, on-premises version of Dynamics AX to Dynamics 365 Supply Chain Management. The company wants to retain a lot of its current data structures and processes but adopt new efficiencies when the benefit is obvious. The company uses a third-party e-commerce site that is custom developed by an internal developer.
Current environment. Items
-
Product numbering
-
All items are numbered by using a smart numbering format: [Product SKU+Size+Color+Style]. For reporting, items are queried for sales and inventory reports by using the first six digits of the item number or until the first dash is encountered.
• A t-shirt could be 01001-S-Red for item 1001 in a size small with the color red.
• A single energy drink could be 02001-12oz or 02001-20oz for the different sizes that product 02001 is sold in.
Product attributes
-
• All clothing shares the same set of product attributes.
• Supplements may share the same Product SKU but can have different attributes for the different size, color, or style variations of the product.
• Product attributes that are unnecessary for an item should be excluded from the item.
Pricing
-
• All items always have a default price. This price will not expire.
• An item will have four different prices created for it every month, one for each customer tier, as detailed later in this section. The pricing expires at the end of the month. If no special pricing is created, the default item price will be used.
• The monthly sales price in which the additional price breaks are determined is based on the estimated cost of the manufactured items.
• Customers are categorized into four pricing tiers (A, B, C, and D) based on sales volume over the past 12 months.
• Customers can negotiate special pricing for items in 30-day, 60-day, and 90-day increments. Quantity restrictions may be placed, depending on the item discount and promotion.
• Promotional pricing is not used today. Pricing is restricted to monthly prices and customer-specific contract pricing.
Cost
-
Items use a FIFO costing model today in their current Dynamics AX 2009 environment; however, using the FIFO costing method has created problems.
Current environment. Warehouse and inventory
• Warehouse requirements are simplistic. There is only one site. The site has two warehouses.
• Trey Research needs to make sure that any energy drinks and nutritional supplements are manufactured and packaged with the highest standards. Trey Research automatically inspects products when all products are reported as finished. All products are inspected again when the items are picked.
• Energy drinks require independent tests to check for dents in packaging, carbonation levels, and fill level.
• Nutritional supplements require separate tests for packaging, expiration date, product seal, and product labeling.
• Government compliancy and consistency testing are handled outside of the Enterprise Resource Planning (ERP) system.
• Resalable products are placed on one of two racks in the warehouse.
Requirements
-
Requirements. Technology
-
• Trey Research will integrate all pricing and discount capabilities to its e-commerce website.
Requirements. Items
-
• Reporting on products should be streamlined as much as possible.
• The item numbering does not have to equate to the actual item number.
• The future costing methods adopted must be commonly accepted for manufacturers.
• Inventory costing should be done after a full inventory valuation is complete. It should take into consideration the direct materials, direct labor, and overhead that goes into an item.
• Any costing method used needs the ability to track cost records about an item, cost categories, and calculation formulas for indirect costs.
• The profitability for nutritional supplements manufacturing processes needs to be expressed in terms of the cost categories for routing operations and the calculation formulas for manufacturing overheads.
• If a vendor can no longer deliver the raw materials for the energy drinks due to supply chain issues, the costs for using an alternative vendor to source the raw materials should be used to determine the impact on profits.
• Apparel items will not be upgraded to the new costing method until after the go-live date due to resourcing and implementation limitations from the apparel team.
Requirements. Pricing
-
• Trey Research plans to do promotional pricing. Certain products will receive special pricing during the hours of extreme sporting events that Trey Research sponsors. Before or after the event, normal pricing will resume.
Requirements. White labeling
-
• Trey Research wants to start white labeling its products under the brands of major nutritional retail store brands. These products would only be sold to specific customers.
• Trey Research will provide and maintain a 'Compare to' price for customers to use to compare the white-labeled products. This Compare to price will also be the default item price for the customer if the customer accidentally lets a contract price expire.
• The configuration of these restrictions must be applied automatically when creating new products for those customers.
Requirements. Warehouse and inventory
• If products in the warehouse must be blocked from transactions for a specific reason, such as a health and safety review, warehouse users should be able to block the products quickly from the ERP system.
• All product quality tests should be processed in a uniform and consistent manner.
• Creation of any quality processes for products inbound to the warehouse, from the production line, or outbound from the warehouse to consumers should be automatically created to facilitate execution.
• Testing requirements:
◦ Requirement 1: 100 percent of all nutritional supplements and 50 percent of all energy drinks must be tested when production orders are completed. After a product is in testing, 100 percent of all tests must be completed.
◦ Requirement 2: 75 percent of all nutritional supplements and energy drinks should be tested against their required tests during an outbound process.
◦ Damaged products must be placed in one of four bins (based on product type) during the inspection process.
◦ You must define quarantine zones to optimize product visibility throughout the testing process.
You need to configure the products in Dynamics 365 Supply Chain Management for the requirements.
Which system objects should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point. 3-3-3 2-2-3 1-2-3 3-3-1 1-1-2.
Case study -
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study -
To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Background -
Trey Research is a multinational manufacturer of health and dietary supplements based in Seattle, Washington. The company is experiencing a rapid expansion not only in its supplements but as a lifestyle brand that also sells apparel. The supplements and apparel businesses operate independently but manufacture and operate in the same legal entity.
Current environment -
Current environment. Technology -
Trey Research is migrating from an outdated, on-premises version of Dynamics AX to Dynamics 365 Supply Chain Management. The company wants to retain a lot of its current data structures and processes but adopt new efficiencies when the benefit is obvious. The company uses a third-party e-commerce site that is custom developed by an internal developer.
Current environment. Items -
Product numbering -
All items are numbered by using a smart numbering format: [Product SKU+Size+Color+Style]. For reporting, items are queried for sales and inventory reports by using the first six digits of the item number or until the first dash is encountered.
• A t-shirt could be 01001-S-Red for item 1001 in a size small with the color red.
• A single energy drink could be 02001-12oz or 02001-20oz for the different sizes that product 02001 is sold in.
Product attributes -
• All clothing shares the same set of product attributes.
• Supplements may share the same Product SKU but can have different attributes for the different size, color, or style variations of the product.
• Product attributes that are unnecessary for an item should be excluded from the item.
Pricing -
• All items always have a default price. This price will not expire.
• An item will have four different prices created for it every month, one for each customer tier, as detailed later in this section. The pricing expires at the end of the month. If no special pricing is created, the default item price will be used.
• The monthly sales price in which the additional price breaks are determined is based on the estimated cost of the manufactured items.
• Customers are categorized into four pricing tiers (A, B, C, and D) based on sales volume over the past 12 months.
• Customers can negotiate special pricing for items in 30-day, 60-day, and 90-day increments. Quantity restrictions may be placed, depending on the item discount and promotion.
• Promotional pricing is not used today. Pricing is restricted to monthly prices and customer-specific contract pricing.
Cost -
Items use a FIFO costing model today in their current Dynamics AX 2009 environment; however, using the FIFO costing method has created problems.
Current environment. Warehouse and inventory
• Warehouse requirements are simplistic. There is only one site. The site has two warehouses.
• Trey Research needs to make sure that any energy drinks and nutritional supplements are manufactured and packaged with the highest standards. Trey Research automatically inspects products when all products are reported as finished. All products are inspected again when the items are picked.
• Energy drinks require independent tests to check for dents in packaging, carbonation levels, and fill level.
• Nutritional supplements require separate tests for packaging, expiration date, product seal, and product labeling.
• Government compliancy and consistency testing are handled outside of the Enterprise Resource Planning (ERP) system.
• Resalable products are placed on one of two racks in the warehouse.
Requirements -
Requirements. Technology -
• Trey Research will integrate all pricing and discount capabilities to its e-commerce website.
Requirements. Items -
• Reporting on products should be streamlined as much as possible.
• The item numbering does not have to equate to the actual item number.
• The future costing methods adopted must be commonly accepted for manufacturers.
• Inventory costing should be done after a full inventory valuation is complete. It should take into consideration the direct materials, direct labor, and overhead that goes into an item.
• Any costing method used needs the ability to track cost records about an item, cost categories, and calculation formulas for indirect costs.
• The profitability for nutritional supplements manufacturing processes needs to be expressed in terms of the cost categories for routing operations and the calculation formulas for manufacturing overheads.
• If a vendor can no longer deliver the raw materials for the energy drinks due to supply chain issues, the costs for using an alternative vendor to source the raw materials should be used to determine the impact on profits.
• Apparel items will not be upgraded to the new costing method until after the go-live date due to resourcing and implementation limitations from the apparel team.
Requirements. Pricing -
• Trey Research plans to do promotional pricing. Certain products will receive special pricing during the hours of extreme sporting events that Trey Research sponsors. Before or after the event, normal pricing will resume.
Requirements. White labeling -
• Trey Research wants to start white labeling its products under the brands of major nutritional retail store brands. These products would only be sold to specific customers.
• Trey Research will provide and maintain a 'Compare to' price for customers to use to compare the white-labeled products. This Compare to price will also be the default item price for the customer if the customer accidentally lets a contract price expire.
• The configuration of these restrictions must be applied automatically when creating new products for those customers.
Requirements. Warehouse and inventory
• If products in the warehouse must be blocked from transactions for a specific reason, such as a health and safety review, warehouse users should be able to block the products quickly from the ERP system.
• All product quality tests should be processed in a uniform and consistent manner.
• Creation of any quality processes for products inbound to the warehouse, from the production line, or outbound from the warehouse to consumers should be automatically created to facilitate execution.
• Testing requirements:
◦ Requirement 1: 100 percent of all nutritional supplements and 50 percent of all energy drinks must be tested when production orders are completed. After a product is in testing, 100 percent of all tests must be completed.
◦ Requirement 2: 75 percent of all nutritional supplements and energy drinks should be tested against their required tests during an outbound process.
◦ Damaged products must be placed in one of four bins (based on product type) during the inspection process.
◦ You must define quarantine zones to optimize product visibility throughout the testing process.
You need to configure the system to automatically enforce inbound and outbound product requirements to and from the warehouse.
Which feature should you use? A. quality associations B. quality orders C. quarantine zones D. quality tests E. nonconformances.
Question #51Topic 3
DRAG DROP
-
Case study
-
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study
-
To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Background
-
Trey Research is a multinational manufacturer of health and dietary supplements based in Seattle, Washington. The company is experiencing a rapid expansion not only in its supplements but as a lifestyle brand that also sells apparel. The supplements and apparel businesses operate independently but manufacture and operate in the same legal entity.
Current environment
-
Current environment. Technology
Trey Research is migrating from an outdated, on-premises version of Dynamics AX to Dynamics 365 Supply Chain Management. The company wants to retain a lot of its current data structures and processes but adopt new efficiencies when the benefit is obvious. The company uses a third-party e-commerce site that is custom developed by an internal developer.
Current environment. Items
-
Product numbering
-
All items are numbered by using a smart numbering format: [Product SKU+Size+Color+Style]. For reporting, items are queried for sales and inventory reports by using the first six digits of the item number or until the first dash is encountered.
• A t-shirt could be 01001-S-Red for item 1001 in a size small with the color red.
• A single energy drink could be 02001-12oz or 02001-20oz for the different sizes that product 02001 is sold in.
Product attributes
-
• All clothing shares the same set of product attributes.
• Supplements may share the same Product SKU but can have different attributes for the different size, color, or style variations of the product.
• Product attributes that are unnecessary for an item should be excluded from the item.
Pricing
-
• All items always have a default price. This price will not expire.
• An item will have four different prices created for it every month, one for each customer tier, as detailed later in this section. The pricing expires at the end of the month. If no special pricing is created, the default item price will be used.
• The monthly sales price in which the additional price breaks are determined is based on the estimated cost of the manufactured items.
• Customers are categorized into four pricing tiers (A, B, C, and D) based on sales volume over the past 12 months.
• Customers can negotiate special pricing for items in 30-day, 60-day, and 90-day increments. Quantity restrictions may be placed, depending on the item discount and promotion.
• Promotional pricing is not used today. Pricing is restricted to monthly prices and customer-specific contract pricing.
Cost
-
Items use a FIFO costing model today in their current Dynamics AX 2009 environment; however, using the FIFO costing method has created problems.
Current environment. Warehouse and inventory
• Warehouse requirements are simplistic. There is only one site. The site has two warehouses.
• Trey Research needs to make sure that any energy drinks and nutritional supplements are manufactured and packaged with the highest standards. Trey Research automatically inspects products when all products are reported as finished. All products are inspected again when the items are picked.
• Energy drinks require independent tests to check for dents in packaging, carbonation levels, and fill level.
• Nutritional supplements require separate tests for packaging, expiration date, product seal, and product labeling.
• Government compliancy and consistency testing are handled outside of the Enterprise Resource Planning (ERP) system.
• Resalable products are placed on one of two racks in the warehouse.
Requirements
-
Requirements. Technology
-
• Trey Research will integrate all pricing and discount capabilities to its e-commerce website.
Requirements. Items
-
• Reporting on products should be streamlined as much as possible.
• The item numbering does not have to equate to the actual item number.
• The future costing methods adopted must be commonly accepted for manufacturers.
• Inventory costing should be done after a full inventory valuation is complete. It should take into consideration the direct materials, direct labor, and overhead that goes into an item.
• Any costing method used needs the ability to track cost records about an item, cost categories, and calculation formulas for indirect costs.
• The profitability for nutritional supplements manufacturing processes needs to be expressed in terms of the cost categories for routing operations and the calculation formulas for manufacturing overheads.
• If a vendor can no longer deliver the raw materials for the energy drinks due to supply chain issues, the costs for using an alternative vendor to source the raw materials should be used to determine the impact on profits.
• Apparel items will not be upgraded to the new costing method until after the go-live date due to resourcing and implementation limitations from the apparel team.
Requirements. Pricing
-
• Trey Research plans to do promotional pricing. Certain products will receive special pricing during the hours of extreme sporting events that Trey Research sponsors. Before or after the event, normal pricing will resume.
Requirements. White labeling
-
• Trey Research wants to start white labeling its products under the brands of major nutritional retail store brands. These products would only be sold to specific customers.
• Trey Research will provide and maintain a 'Compare to' price for customers to use to compare the white-labeled products. This Compare to price will also be the default item price for the customer if the customer accidentally lets a contract price expire.
• The configuration of these restrictions must be applied automatically when creating new products for those customers.
Requirements. Warehouse and inventory
• If products in the warehouse must be blocked from transactions for a specific reason, such as a health and safety review, warehouse users should be able to block the products quickly from the ERP system.
• All product quality tests should be processed in a uniform and consistent manner.
• Creation of any quality processes for products inbound to the warehouse, from the production line, or outbound from the warehouse to consumers should be automatically created to facilitate execution.
• Testing requirements:
◦ Requirement 1: 100 percent of all nutritional supplements and 50 percent of all energy drinks must be tested when production orders are completed. After a product is in testing, 100 percent of all tests must be completed.
◦ Requirement 2: 75 percent of all nutritional supplements and energy drinks should be tested against their required tests during an outbound process.
◦ Damaged products must be placed in one of four bins (based on product type) during the inspection process.
◦ You must define quarantine zones to optimize product visibility throughout the testing process.
You need to configure quality controls.
Which solution objects should you configure? To answer, drag the appropriate solution objects to the correct configurations. Each solution object may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
2-3 3-3 1-4 4-2.
DRAG DROP
-
A company uses Dynamics 365 Supply Chain Management. The company purchased a high-tech machine that cuts production time in half compared to existing machines.
The new machine must be serviced after 200 finished goods are produced. Downtime for the new machine will impact production and must be planned in advance so the production lead times are adjusted. The service technicians must always prioritize the new machine repairs over any other repairs.
You need to configure the new machine to prioritize servicing over other repairs.
What should you configure for each requirement? To answer, drag the appropriate configurations to the correct requirements. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point. 2-4 1-3 2-3 3-4.
Question #53Topic 3
DRAG DROP
-
A bottle manufacturing company uses Dynamics 365 Supply Chain Management to manage operations.
The company plans to install machines that accept empty bottles for a cash refund or donation at several recycling locations.
You need to complete the setup for installation of the assets.
What should you configure for each requirement? To answer, drag the appropriate features to the correct requirements. Each feature may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point. 3-2 1-3 3-1 2-3.
HOTSPOT
-
A company is implementing Dynamics 365 Supply Chain Management.
The company wants to optimize the warehouse inbound operations.
You need to select the inbound operation business process based on the scenario.
Which inbound operations should you select? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
2-2-1 1-2-1 2-1-2 1-2-2.
HOTSPOT
-
A company uses Dynamics 365 Supply Chain Management. The company purchased new forklifts for the warehouse.
The types of forklifts vary based on the purpose within the warehouse. Parts, such as belts and wheels, are not always universal and could be specific to the forklift manufacturer and model. The forklift purchase orders must go through a purchase requisition approval process because they are being purchased from new vendors.
You need to determine where to capture the manufacturer and model information for each forklift.
On which component should you capture the information for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point. 2-2 1-2 2-3 4-2.
HOTSPOT
-
A company uses Dynamics 365 Supply Chain Management. The company plans to add trucks to the existing truck fleet over the upcoming months.
The company requires truck drivers to complete a daily self-inspection of their trucks. The government requires that commercial trucks are inspected annually by a certified repair facility.
The fleet manager wants to minimize the amount of time the truck is in the shop.
• When a truck driver reports a problem during the daily inspection that requires a repair and is within a week of the annual inspection, the company requires that both events occur the same time in the shop.
• The annual inspection can vary on due date for both new and existing trucks.
You must configure the requirements to minimize truck downtime.
What should you configure for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point. 1-2 2-3 4-2 1-3.
A manufacturing company uses Dynamics 365 Supply Chain Management.
The company replaced its burners to limit carbon dioxide emissions. The new burners require frequent servicing to be compliant with environmental regulations. The new burners are more complex and take longer to service than the previous burners.
The production controller must track fuel use in liters to schedule timely maintenance. The additional time taken to plan maintenance must be considered.
You must configure the system to meet the requirements.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point. A. Register consumption. B. Configure counter types. C. Set up asset service level. D. Configure asset BOM. E. Create attributes.
A company is implementing Dynamics 365 Supply Chain Management.
Based on a vendor agreement, the company must take ownership of items when they are shipped. Items must be part of inventory valuation but not available for sale until they are physically received into the warehouse.
You need to configure the system to meet the vendor's requirements.
What should you configure? A. Landed cost B. Item group C. Item status D. Item arrival E. Transportation management.
A company uses Dynamics 365 Supply Chain Management and the FIFO valuation method for inventory.
The company’s warehouse experienced a roof leak. The leak caused damage to items in the warehouse. Accounting must know the total cost of inventory that is damaged but does not want the damaged items removed from inventory until they have been inspected.
You need to meet the requirements of the accounting department.
Which two features should you use? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point. A. Stop item for inventory transactions B. Movement journal C. Order holds D. Location profile E. Inventory status.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A manufacturing company has implemented Dynamics 365 Supply Chain Management. The company relies on machinery and equipment for its operations. It has a diverse range of assets, including manufacturing equipment, vehicles, and tools.
The company wants to optimize its asset maintenance processes to minimize downtime and improve overall productivity. The company wants to implement both preventive and reactive maintenance strategies on the following scenarios:
• Changing the tires and oil on the maintenance vehicle fleet.
• Replacing a faulty component on a box maker.
You need to determine the functionality to use for each maintenance requirement.
Solution: Create maintenance plans for the vehicle fleet and the box maker.
Does the solution meet the goal? A. Yes B. No.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A manufacturing company has implemented Dynamics 365 Supply Chain Management. The company relies on machinery and equipment for its operations. It has a diverse range of assets, including manufacturing equipment, vehicles, and tools.
The company wants to optimize its asset maintenance processes to minimize downtime and improve overall productivity. The company wants to implement both preventive and reactive maintenance strategies on the following scenarios:
• Changing the tires and oil on the maintenance vehicle fleet.
• Replacing a faulty component on a box maker.
You need to determine the functionality to use for each maintenance requirement.
Solution: Create maintenance plan for the vehicle fleet and a maintenance round for the box maker.
Does the solution meet the goal? A. Yes B. No.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A manufacturing company has implemented Dynamics 365 Supply Chain Management. The company relies on machinery and equipment for its operations. It has a diverse range of assets, including manufacturing equipment, vehicles, and tools.
The company wants to optimize its asset maintenance processes to minimize downtime and improve overall productivity. The company wants to implement both preventive and reactive maintenance strategies on the following scenarios:
• Changing the tires and oil on the maintenance vehicle fleet.
• Replacing a faulty component on a box maker.
You need to determine the functionality to use for each maintenance requirement.
Solution: Create maintenance round for the vehicle fleet and a maintenance plan for the box maker.
Does the solution meet the goal? A. Yes B. No.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A manufacturing company has implemented Dynamics 365 Supply Chain Management. The company relies on machinery and equipment for its operations. It has a diverse range of assets, including manufacturing equipment, vehicles, and tools.
The company wants to optimize its asset maintenance processes to minimize downtime and improve overall productivity. The company wants to implement both preventive and reactive maintenance strategies on the following scenarios:
• Changing the tires and oil on the maintenance vehicle fleet.
• Replacing a faulty component on a box maker.
You need to determine the functionality to use for each maintenance requirement.
Solution: Create maintenance rounds for both the vehicle fleet and the box maker.
Does the solution meet the goal? A. Yes B. No.
DRAG DROP
-
A company is implementing Dynamics 365 Supply Chain Management.
The company has a history of incorrect inventory valuation reporting due to non-existence of a proper cycle counting policy.
You need to select the type of cycle counting to perform for each use case.
Which cycle counting types should you perform? To answer, drag the appropriate cycle counting types to the correct use cases. Each cycle counting type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point. 1-2 2-1.
|
