ERASED TEST, YOU MAY BE INTERESTED ON MTCNA set 2
COMMENTS |
STATISTICS |
RECORDS
|
|---|
TAKE THE TEST
|
Title of test:
MTCNA set 2 Description: another set for normis lovers out there Author: normis Other tests from this author Creation Date: 10/12/2024 Category: Others Number of questions: 25 |
Share the Test:
New Comment
No comments about this test.
Content:
|
For static routing functionality, additionally to the RouterOS 'system' package, you will also need the following software package: routing no extra package required dhcp advanced-tools. action of type masquerade in 'ip -> Firewall -> NAT' is a 'special case' of the following action: redirect dst-nat src-nat same netmap. Which port(s) and protocol(s) are used by MikroTik RouterOS DNS forwarder: TCP 53 UDP 53 UDP 80 TCP 80. Which route will be used to reach host 192.168.1.55? /ip route add disabled=no distance=1 dst- address=192.168.1.0/24 gateway=1.1.1.1 add disabled=no distance=1 dst-address=192.168.1.0/25 gateway=2.2.2.2 add disabled=no distance=1 dst-address=192.168.0.0/16 gateway=3.3.3.3 Route via gateway 1.1.1.1 Route via gateway 3.3.3.3 Route via gateway 2.2.2.2. Why is it useful to set a Radio Name on the wireless interface? To identify a RouterOS station in a list of connected clients To identify a station in the Access List: To identify a station in Neighbor discovery To identify a wireless access point on your mobile device. Is action=masquerade allowed in chain=dstnat? yes, but it works only for incoming connections no yes, but only if dst-addr is specified yes. In the Route List, the identification DAb for a route stands for dynamic - active - bgp direct - active - bgp direct - acknowledge - backup dynamic - active - backup. Mark all correct answers about wireless: Forwarding between client can be enable by using access-list /ip firewall filter allows to deny authentication to the AP Wireless access-list on the access point (AP) can be used to allow or deny client connection to your AP The only way to prevent wireless client connections is to disable wireless interface. Router has Wireless and Ethernet client interfaces, all client interfaces are bridged. To create a DHCP service for all clients you must configure DHCP server for all client, DHCP server must be configured on only on bridge interface every bridge port DHCP service is not possible in this setup Ethernet and wireless interfaces. Netinstall can be used to Reinstall software without losing licence Install package for different hardware architecture Install different software version (upgrade or downgrade) Keep configuration, but reset a lost admin password. Which is the default port of IP-Winbox? TCP 8192 TCP 80 TCP 8291 UDP 8291. What can be used as 'target-address' in the simple queue? client's MAC address server's address address list name client's address. Consider the following diagram. Assuming that all the necessary configuration has already been done on R2 (proxy-arp is disabled), to communicate from a device on LAN1 to a device on LAN2, which of the following configurations on R1 would enable this? /ip route add dst-address=0.0.0.0/0 gateway=192.168.99.2 /ip route add dst-address=0.0.0.0/0 gateway=Ether1 /ip route add dst-address=192.168.1.0/24 src-address=192.168.0.0/24 gateway=192.168.99.2 /ip route add dst-address=192.168.0.0/24 gateway=192.168.0.1 /ip route add dst-address=192.168.1.0/24 gateway=192.168.99.2. What is the meaning of the status letter "R" on a PPPoE client interface in RouterOS Interfaces menu? Remote Radius Running Reconnecting. In RouterOS queue configurations the word "total" usually represents upload upload + download download - upload download. If ARP=reply-only is configured on an interface, what will this interface do Add new IP addresses in /ip arp list Accept all IP/MAC combinations listed in /ip arp as static entries Add new MAC addresses in /ip arp list Accept all IP addresses listed in /ip arp as static entries Accept all MAC-addresses listed in /ip arp as static entries. You want to use PCQ and allow 256k maximum download and upload for each client. Choose correct argument values for the required queue kind=pcq pcq-rate=5000000 pcq-classifier=dst-address kind=pcq pcq-rate=1256000 pcq-classifier=dst-address kind=pcq pcq-rate=256000 pcq-classifier=src-address kind=pcq pcq-rate=5000000 pcq-classifier=src-address kind=pcq pcq-rate=256000 pcq-classifier=dst-address. Which options can be used when you want to prevent access from one specific address to your router web interface? Firewall Filter Chain Input WWW service from IP Services Group settings for System users Firewall Filter Chain Forward. Which facility should be used, to ensure that clients with radio signal strength poorer than -90 dBm can't connect to interface wlan1 on Mikrotik Access Point? Access List Connecttion List Registered List Hotspot User Profile. What will happen if "Default forward" is disabled in wireless menu on a RouterOS AP? Only clients with matching access control list rule will be able to connect to the AP Clients will not be able to connect to the AP Clients will not be able to communicate with each other AP will not be able to communicate with the clients. What is the correct action for a NAT rule on a router that should intercept SMTP traffic and send it over to a specified mail server? Redirect Dst-nat Passthrough Tarpit. Which configuration menu should you use to change router's Winbox default port? /ip firewall service-ports /ip firewall filter /system resource /ip service. when setting up a server ppp secrets are used for: Router users IPSec clients PPPoE clients PPP clients L2TP clients PPtP clients. The router's firewall rules are: / ip firewall filter add chain = forward action = jump jump-target = custom / ip firewall filter add chain = custom action = passthrough / ip firewall filter add chain = forward action = log Traffic will be logged in chain=forward Traffic will be accepted in the chain = custom Traffic will be dropped in the chain = custom. Which port does PPTP use by default? TCP 1723 UDP 1721 UDP 1723 TCP 1721. |
Report abuse