You are replacing a FAS system that has several DS4243 disk shelves. The new system is an AFF A300. You want to resuse the DS4243 disk shelves with your new AFF A300. In this situation, which Netapp tool would you use to confirm the task is possible? Config Advisor Interoperability Matrix Tool (IMT) Hardware Universe Active IQ.
You create a dedicated SVM for CIFS on a FAS8200 2-node cluster using multiple disk types. In this scenario, which action ensures that this SVM hosts volumes on on SATA drives? Edit the SVM resource Allocation Assign all the SATA drives to a CIFS SVM Move the SAS and SSD aggregates to a different node Create a FlashPool aggregate with the SATA drives.
You are creating a new SVM, which of the following will be automatically created? Root Volume SVM Root Volume Root Aggregate SVM Management LIF.
Which management tool would you use to add licenses to an AFF system? Netapp Service Level Manager OnCommand Insight Active IQ Unified Manager ONTAP System Manager.
You must create a CIFS share for a replicated destination volume for read-only access to the files. In this scenario, which task must be completed before you create the share? Change permissions Set up the preferred domain controller Mount the volume Break the replication.
You have purchased an AFF A300. You want to relocate an aggregate from node_A to node_B. In this scenario, which three system level operations will veto the aggregate relocation by default (Choose 3) aggregate deduplication operations aggregate or volume configuration operations aggregate maintenance operations node root volume rename operations cluster upgrade operations.
Netapp supplied a replacement for a failed drive, but the replacement drive does not show up as a spare. Referring to the exhibit, which statement is true? Automatic disk assignment is disabled You exceeded the maximum drive count for the controller platform The automatic assignment policy is set to the default The failed disk was not sanitized before removal.
In System Manager 9.3, performance data is being collected on which object shown in the exhibit? SVM Cluster Node Storage.
In an HA pair, how many Intercluster LIFs are required for FabricPool? 0 1 2 4.
Which two license protocols are assigned to an SVM for block protocols? (Choose 2) FCoE CIFS FCP iSCSI.
Which Netapp software do you use to confirm that the SAS cabling is correct? Harware Universe Interoperability Matrix Tool Active IQ Unified Manager Active IQ Config Advisor.
Which two types of policies are applied to which types of aggregates Controller failover (CFO) policy to root aggregates Controller failover (CFO) policy to all the aggregates Storage failover (SFO) policy to root aggregates only Storage failover (SFO) policy to data aggregates only.
A customer has an ONTAP 9.8 AFF A250 with 12 internal SSDs. The customer wants to expand their existing aggregates by adding 12 more SSDs to the empty drive slots in the internal shelf. Which two steps must you take to accomplish this task? Manually create root-partition on each disk, and use both partitions to grow existing data aggregates ONTAP will automatically partition the SSDs when the are added to the data aggregate Assign ownership of each SSD manually to the nodes, and they will be automatically partitioned and added Add the newly create data2 partitions to the partner's exisiting data aggregate.
Refer to the Exhibit. Your Ontap 9.8 cluster administrator modified a LIF to use a new service policy. Which type of peer connection is used by LIF1? SVM BGP OSPF Cluster.
You have Windows Server 2019 hosts that use network address translation (NAT) on the network when connecting to their ONTAP 9.8 AFF A400 cluster. You are having iSCSI connectivity issues using IP addresses. The network team recommends using fully qualified domain names (FQDNs).
Which SAN setting in ONTAP would you modify in this scenario? LIF service policies Selective LUN Map (SLM) Port sets SendTargets.
You have a 2-node ONTAP cluster with both 0e ports connected to Fabric A. You have an FC host connected to the FC fabric with the follow initiator WWNs:
--WWNN: 20:00:00:25:B5:01:F0:2A
--WWPN: Fabric A: 20:00:00:25:B5:01:A0:2A
Referring to the exhibit, which three WWNs should be configured in a zone together (Choose 3) 20:00:00:25:B5:01:A0:2A 20:00:00:25:B5:01:F0:2A 50:0a:09:82:80:b7:1b 20:0d:00:a0:98:69:97:ff 20:0f:00:a0:98:69:97:ff.
An Administrator has an SVM named vs1 that is being used for UNIX workloads. Name mappings have been configured with both local name mapping files and with LDAP. NIS will not be used in the environment. The administrator need to ensure that LDAP takes precedence for access over file-based name mappings.
In this scenario, how would you accomplish this task? Use System Manager to modify the properties of the vServer to set the order of preference Modify the /etc/nsswitch.conf file to set the order of preference on the UNIX hosts connecting to the SVM Use the vserver services name-service ns-switch command to set the order of preference. Do not change anything, this is the default behaviour.
You have a Windows 10 computer that lost an SMB drive mapping that used the IP address of your SVM. The mapping was working until security requirements disabled NTLM authentication. Windows Server 2019 servers remained connected to the drive mapping. Referring to the exhibit, what is the reason for this problem? SMBv3 is required The cluster clock is incorrect by more than 3 minutes Kerberos requires the server name DNS is not enabled.
An administrator wants to configure cluster peering between two clusters. In this situation, which role must be used when a LIF is configured management data intercluster cluster.
What are two methods to improve system administration access control security on your ONTAP environment? (choose 2) Enable encrypted cluster peering for peering relationships using the cluster modify command Enable two factor authentication for SSH access Enable SAML authentication using an identity provider that support multi-factor authentication Enable Onboard Key Manager to encrypt volumes.
A customer has a new ASA platform but cannot get the target FC ports to show up in ONTAP System Manager. Referring to the exhibit, what would cause this problem? The FC license is unlicensed. The base license is enabled. The FabricPool license is unlicensed. The SMB/CIFS license is unlicensed.
You are working on a disaster recovery situation where the controller, which is part of a fabric-attached MetroCluster configuration in the disaster site, fails to boot and stays at the loader prompt. This failure generates the error message that is shown in the exhibit.
Which sequence of steps will recover the disaster site? Perform switchback, heal data aggregate, heal root aggregate, and boot ONTAP. Heal root aggregate, heal data aggregate, boot ONTAP, and perform switchback. Heal data aggregate, heal root aggregate, boot ONTAP, and perform switchback. Boot ONTAP, heal root aggregate, heal data aggregate, and perform switchback.
You are an administrator that manages a number of mission-critical applications that use block protocols only. The business unit requires the fastest storage failover.
In this scenario, which ONTAP solution satisfies the requirement? All SAN Array (ASA) with symmetric active-active topology ONTAP Select with Asymmetric Logical Unit Access (ALUA) AFF with Asymmetric Logical Unit Access (ALUA) FAS with symmetric active-active topology.
You have a mix of FAS8200s and AFF A700s in your environment. In this scenario, which two statements are true? (Choose two.) Inline data compaction is disabled by default on FAS systems. Inline aggregate-level deduplication is enabled by default on FAS systems. Inline data compaction is disabled by default on AFF systems. Inline aggregate-level deduplication is enabled by default on AFF systems.
Which two statements are true about epsilon? (Choose two.) Epsilon is automatically assigned to the last node when the cluster is created. Epsilon is an extra fractional vote that enables quorum. In a two-node cluster, each node holds epsilon. Epsilon is automatically assigned to the first node when the cluster is created.
Which command would you use to enable the ONTAP HA feature? storage failover modify -enabled true -node * cluster ha modify -configured true cluster ha modify configured false network options switchless-cluster modify true.
A storage administrator is unable to mount NFS volumes in the SVM1 namespace.
Referring to the exhibit, what is causing this problem? The NFS v4 ACL support is disabled The NFS protocol is disabled The NFS license is disabled The NFS v3 and v4 protocols are running at the same time.
Which three name services does ONTAP support? (Choose three.) HTTP Local Files LDAP NIS SNMP.
When a storage QoS policy is configured, which two metrics are configured with a maximum limit? (Choose two.) Concurrent connections IOPS MBPs Latency.
Which ONTAP feature uses the Service Processor to speed up takeover times between HA pairs? hardware assisted takeover cluster HA automatic takeover and giveback epsilon.
You are training a storage operator to view the aggregates available on the nodes from multiple shells.
Which two shell and command combinations would you use to accomplish this task? (Choose two.) nodeshell aggregate status systemshell aggregate status systemshell aggregate show clustershell aggregate show.
You change a volume's space guarantee from volume to none.
In this scenario, which statement is correct? Free space from the volume shows up as free space in the aggregate. All existing snapshots are automatically deleted. Snap reserve is set to zero (0). Fractional reserve is set to zero (0).
A storage administrator currently has an 8-node FAS8200 cluster with CIFS, NFS, and iSCSI licenses installed. In this scenario, how many additional nodes are supported? 3 6 4 1.
An administrator wants to restore a file using the Previous Versions tab on a Windows client.
Which command enables the Previous Versions feature? volume modify -group volume modify -user volume modify -policy volume modify -snapdir-access.
When a write from a SAN host is received, the information is stored within the controller before it is written to the underlying RAID.
In this scenario, which component stores the data? NVRAM FlashCache HBA Flash Pool.
You are provisioning a LUN for a new host.
In this scenario, which three objects must exist? (Choose three.) Export Policy igroup LUN interface group volume.
Which configuration is supported by MetroCluster? A single AFF at Site A attached through fabrics to an AFF HA pair at Site B An AFF HA pair at Site A attached through fabrics to a FAS HA pair at Site B A single AFF at Site A attached directly to a single AFF at Site B An HA pair at Site A attached directly to an HA pair at Site B.
Your 4-node cluster has two controllers in takeover as shown in the exhibit.
Which action must be performed to ensure a giveback occurs on both nodes? Perform a giveback of node4. Perform a giveback of node3. Perform a giveback of node2. Perform a giveback of node1.
An SVM is configured to authenticate SVM administrators with the access method set to Password. A computer account for the SVM exists on the Active Directory domain controller. You are now required to authenticate administrators through the domain.
Which two steps are required to accomplish this task? (Choose two.) Re-create the computer account for the SVM on the domain Configure the SVM as a tunnel to the domain Create a custom role for all users who belong to the domain Create a login account on the cluster for the domain users with an access method of "domain".
When you create a FlexVol volume, which security style is applied by default? The security style of the SVM root volume The security style of the root volume of the cluster NTFS UNIX.
You are attempting to establish a SnapMirror relationship between your ONTAP cluster (AcmeClus01) and a partner company’s ONTAP cluster (WidgetsClus01). The clusters are unable to establish a peering relationship. You perform a packet capture on WidgetsClus01 and do not see any packets from AcmeClus01. You also discover that the IP subnet that is used for WidgetsClus01’s intercluster LIFs overlaps with a local subnet at your company.
In this scenario, which feature would enable AcmeClus01 and WidgetsClus01 to peer with each other? VLANs Broadcast domains IPspaces ONTAP subnets.
SnapMirror Business Continuity (SM-BC) relies on a component to trigger an automatic unplanned failover (AUFO).
In this scenario, what is this component? Tiebreaker software ONTAP Deploy Cloud Manager ONTAP Mediator.
You are the administrator of an ONTAP 9.8 cluster. Your company wants to know how many files are in the NAS volumes of the cluster and how old these files are.
Which two tools fulfill this requirement? (Choose two.) ONTAP System Manager Active IQ Unified Manager Active IQ Config Advisor ONTAP CLI.
You want to configure Active Directory domain controller access for NetApp ONTAP cluster administration.
In this scenario, which two actions would accomplish this task? (Choose two.) Configure an authentication tunnel through an admin SVM Use the vserver active-directory create command to create a computer account on the domain for a CIFS SVM Configure an authentication tunnel through an existing CIFS SVM Use the vserver active-directory create command to create a computer account on the domain for a non-CIFS SVM.
Windows 2019 reports 500 GB of free space on a disk; however, on the storage side, the LUN has 0 bytes free. When the host deletes files on the disk, auto re-claim on the thin-provisioned LUN does not occur.
In this scenario, which action should you take to enable space reclamation? Set the space allocation option to enable Set the space allocation option to disable Enable space guarantees on the volume Enable space guarantees on the LUN.
You want to add SSDs to existing HDD aggregates.
Which NetApp tool helps you to validate how many SSDs would improve performance? OnCommand Workflow Automation Active IQ Unified Manager ONTAP System Manager Automated Workload Analyzer.
You have a NetApp AFF A400 HA pair with Fabric Pool enabled on all data using the snapshot-only policy. Users are reporting slow restores when they recover files with the Windows Previous Versions tab.
Referring to the exhibit, what is the highest latency seen on restore? 10500 10021 7889 9591.
Your company wants to increase access security in both their NFS and iSCSI environments. Currently iSCSI is not authenticated and NFS relies only on export policies for security.
Which two enhancements do you use to satisfy this new criteria? (Choose two.) Enable Kerberos for NFS exports Enable Challenge-Handshake Authentication Protocol (CHAP) for iSCSI LUN access Enable Challenge-Handshake Authentication Protocol (CHAP) NFS exports Enable Kerberos for iSCSI LUN access.
You have an ESXi cluster with VMware VMFS LUNs on an AFF A400 system. After troubleshooting performance issues, you determine that timeout best practices are not set on the hosts. in this scenario, what NetApp tool would apply the best practice settings? SnapManager SAN Host Utilities SnapCenter Plugi-In for VMware vSphere Virtual Storage Console (VSC).
A volume is set to use Adaptive QoS with the default policy.
In this scenario, which change would affect the QoS throughput ceiling? The volume is resized Disks are added to the volumes aggregate Data is added to the volume More client access the volume.
Which statement is correct about Temperature Sensitive Storage Efficiency (TSSE)? TSSE operations on an AFF array are automatically throttled depending on whether data is hot or cold TSSE is enabled automatically on newly created thick provisioned volumes TSSE operations on Cloud Volumes ONTAP are automatically throttled depending on whether data is hot or cold TSSE operations on ONTAP Select are automatically throttled depending on whether data is hot or cold.
Which configuration is supported using NetApp’s All SAN Array (ASA)? 2-node cluster 12-node cluster 24-node cluster single node cluster.
After deploying an ONTAP 9.8 cluster, you want to disable the unused Ethernet ports.
In this scenario, which two methods would accomplish this task? (Choose two.) Use Active IQ Config Advisor Use ONTAP System Manager Use Active IQ Unified Manager Use the command line interface.
After creating an SVM in an ONTAP cluster, you are asked to delegate administration of the newly created SVM to an SVM administrator.
In this scenario, which two tasks must you complete? (Choose two.) Set a password for the vsadmin user account Configure role-based access control (RBAC) for the vsadmin user account Create a LIF for SVM management Create the vsadmin user account in the new SVM.
You need to configure data-at-rest encryption for your NetApp ONTAP 9.8 cluster. Your company does not have Key Management Interoperability Protocol (KMIP) services available but must require a passphrase to be entered when a node is rebooted.
In this scenario, which two actions should be performed to satisfy these requirements? (Choose two.) Enable onboard key management Enable common criteria mode Configure an external key management server Enable cluster-wide FtPS-compliant mode.
You want to enable the internal ONTAP engine that quickly identifies the file and directory differences between two Snapshot copies. In this scenario, which feature would accomplish this task? SnapCenter SnapDiff SnapVault SnapLock.
Which security method would be used to authenticate targets and initiators in an ISCSI environment? CHAP LDAP NIS /etc.hosts.
You are currently using SnapMirror Synchronous (SM-S) to protect a critical workload at your organization and you want to convert the SnapMirror policy from sync to StrictSync.
In this scenario, which procedure allows you to achieve this task? Modify the existing SnapMirror relationship specifying the strictSync policy, then re-synchronize it Recreate the SnapMirror relationship, specifying the strictSync policy, then promote it Recreate the SnapMirror relationship, specifying the strictSync policy, then re-synchronize it Modify the existing SnapMirror relationship specifying the strictSync policy, then promote it.
Which three protocols are supported by NetApp ONTAP Select? (Choose three.) CIFS iSCSI NVMe NFS FCP.
You are adding a NetApp AFF A400 system to an existing 4-node duster and want to know which ports you would use to expand your cluster.
Referring to the exhibit, which tool would you use to accomplish this task? Netapp Interoperability Matrix (IMT) Netapp Hardware Universe (HWU) Active IQ Unified Manager Active IQ Config Advisor.
You are asked by your network engineering team to make sure that your NetApp cluster is configured to run LACP on its network ports.
Which network component satisfies this request? Interface Group Failover Group VLAN Broadcast Domain.
You need to increase the number of files that can be created in a volume.
Which two methods enable you to achieve this goal? (Choose two.) Increase the size of the volume Set the space guarantee to “volume” Set the fractional reserve to "0" Increase the number of files permitted on the volume.
You are asked to deploy a 2-node ONTAP Select cluster. The physical hardware is located in two different locations and you want the aggregates mirrored synchronously between the two data centers. You must ensure high availability and automated switchover.
In this scenario, which two steps would you take to fulfill this requirement? (Choose two.) Use ONTAP Mediator service to make sure that you have a quorum for the two nodes Use ONTAP Select Deploy to install the nodes on the physical hardware Ensure that the ONTAP Select Deploy VM resides at a third location other than the two data centers Install the SnapMii Mt Sync license on the cluster.
When you set up an ONTAP cluster, which two SVM types are automatically created? (Choose two.) Data Node Cluster Admin.
You have an ONTAP 9.8 cluster. After network maintenance, the LIF that is shown in the exhibit is not always on a correct port and is unreachable by users until the LIFs are moved to port e0c or e0d on either storage node.
In this scenario, which action should you take to ensure that the LIF only fails over to the correct ports? Change the LIF’s failover policy to sfo-partner-only Split the Broadcast Domain Create a DNS load balancing zone Create an IPspace.
Your company has purchased two NetApp AFF A400 HA pairs.
During deployment, how many root aggregates are created? 8 6 2 4.
You want to scale out storage performance for read-intensive data across multiple locations.
In this scenario, which NetApp feature accomplishes this task? FlexClone Flash Pool FlexVol FlexCache.
Your company wants their newly installed ONTAP system to automatically send telemetry data to NetApp to provide early notification of any security risks, bug fixes, and ONTAP updates. Furthermore, in case of hardware failures, a support case should be opened automatically at NetApp.
Which two NetApp components satisfy the requirements? (Choose two.) ONTAP AutoSupport Cloud Insights Active IQ Active IQ Unified Manager.
You have an Internet of Things (loT) application that will use SMB shares on a remote ONTAP Select instance. There are no name services and only a local network is available at the remote loT site.
In this scenario, which two features are supported by ONTAP software for the loT application? (Choose two.) SMB3 Witness protocol SMB Server in workgroup mode Active Directory users CIFS local users.
After attempting to perform an ONTAP upgrade, it fails during the pre-check.
In this scenario, what would cause this problem? idle SnapMirrors encrypted volumes offline data LIF offline volume.
You recently added a new ESXi host to your VMware vSphere cluster. However, you cannot mount any of the existing NFS datastores to the host.
Referring to the exhibit, which action solves the problem? Enable Kerberos in the export policy Add NFSv4 to the access protocols Add HOST 3’s IP address to the NFS export policy Add SMB/CIFS to the access protocols.
You have created a new FlexCache cache volume and want to warm the cache before clients access the cache volume for the first time.
In this scenario, how would you accomplish this task? Synchronize the origin and cache first with the volume flexcache sync-properties command Copy the data from the origin volume to the cache volume with the NetApp XCP Migration Tool Prepopulate the cache volume with data from the origin volume using the flexcache prepopulate start command Enable block-level invalidation using the volume flexcache origin config modify command.
You have a remote FlexCache storage device that is running on ONTAP Select 9.8 software. The cache origin volume is on an FAS8700 that is running ONTAP 9.8 software. The WAN connection dropped, and the FlexCache volume is in disconnected mode.
In this scenario, which LIFs would you ping to troubleshoot the disconnect? Management Cluster Data Intercluster.
Your company requests that the monthly performance data of your ONTAP 9.8 cluster be exported to a CSV file for further processing.
In this scenario, which three NetApp products satisfy this requirement? (Choose three.) Active IQ OneCollect Cloud Insights ONTAP System Manager Active IQ Config Advisor Active IQ Unified Manager.
All SMB users are reporting that their network share performance is slow on a new NetApp FAS500f HA pair. You determine that the users have converged network adapters (CNAs) with flow control enabled and no option to disable.
In this scenario, which two flow control settings are recommended on the NetApp ONTAP physical ports? (Choose two.) Disable flow control end-to-end on data network ports Disable flow control end-to-end on cluster network ports Enable flow control end-to-end on data network ports Enable flow control end-to-end on cluster network ports.
You attempt to create an SVM for CIFS access only.
In this scenario, which three actions must be performed to join the existing Active Directory? (Choose three.) Create DNS entries Create a cluster LIF Create a data LIF Create NTP entries Create export policies.
The availability of the remote cluster in the peering relationship shows “Partial”.
Referring to the exhibit, what is the reason for this status message? The intercluster LIFs on the local cluster are unavailable and not able to communicate to the remote cluster The remote cluster does not have its cluster license applied properly Some nodes in the local cluster are not able to contact some or all nodes in the remote cluster The local cluster is unable to authenticate successfully to the remote cluster.
What establishes a quorum in a 4-node cluster? TieBreaker Epsilon Cluster Peer ONTAP Mediator.
Your company runs a NetApp AFF A220 cluster as a file server for NFS and SMB. You want to use one of the unused ports to connect a single Windows host directly, using FC. You have converted the UTA2 ports e0e and e0f to FC and equipped them with a 16-Gbps FC transceiver. Your Windows host fails to connect to the storage.
In this scenario, which action solves the problem? Use the arbitrated loop topology on storage and host Use an Ethernet switch between storage and host Use the point-to-point topology on all ports Use an FC switch between storage and host.
Which two statements are true about NVMe? (Choose two.) NQNs are added to namespaces LUNs are mapped to initiator groups Namespaces are mapped to the subsystems NQNs are added to subsystems.
You have a 2-node NetApp FAS2750 ONTAP cluster. You create a new 20-GB LUN in a new 100-GB volume and write 10 GB of data to the LUN. No storage efficiencies are enabled for the volume or aggregate.
Referring to the exhibit, which two statements are true? (Choose two.) ONTAP reports that the volume is using 10 GB of its containing aggregate ONTAP reports the volume as 20% full ONTAP reports that the volume is using 100 GB of its containing aggregate ONTAP reports the volume as 10% full.
You have commissioned a new AFF A250 MetroCluster over IP configuration. Your company requires an automatic switchover to the surviving site in case of a site disaster.
What do you need to configure to fulfill this requirement? ONTAP Mediator service Cluster Failover Automated unplanned switchover Storage Failover.
You are caching on-premises ONTAP volumes into the cloud with Cloud Volumes ONTAP as shown in the exhibit.
In this scenario, which two protocols are supported? (Choose two.) NVMe SMB iSCSI NFS.
Your company requires WORM archiving of data on their ONTAP cluster. The data must not be able to be deleted even by an administrator.
Which ONTAP feature fulfills this requirement? SnapVault Software SnapMirror software SnapLock Enterprise SnapLock Compliance.
A user cannot save a file on an ONTAP SMB share.
Referring to the exhibit, which action allows the user to save the file? Synchronize the ONTAP Cluster time to the Active Directory time Let the user save to a writable location Set the user permission for the share to write Allow the file type *.rff in the CIFS Server fpolicy.
A customer wants to migrate a series of LUNs from a third-party array to a FAS.
In this scenario, which two tools would the customer use? (Choose two.) XCP NKS ADP FLI.
After an ONTAP upgrade, you notice that several cluster LIFs are not on their home ports as shown in the exhibit.
Which LIF option would change this outcome? The failover-policy option The data-protocol option The subnet-name option The auto-revert option.
A user wants existing data in a FlexVol created in ONTAP 9.1 to be placed into a FlexGroup volume with ONTAP 9.8.
In this scenario, which two statements are true? (Choose two.) Use SnapMirror to replicate data from FlexVol to FlexGroup Use XCP to copy data from a FlexVol to a FlexGroup You can convert the FlexVol volume to a FlexGroup volume A FlexVol to FlexGroup conversion is not supported.
A Linux host with the 10.0.1.24 IP address is unable to mount the VOL _A volume using NFSv3.
Referring to the exhibit, what is the problem? The volume is in read-only The logical interface does not allow the NFSv3 protocol The host IP address does not match the export policy rule The volume is not mounted in the namespace.
Which two types of capacity tiers are supported with Fabric Pool aggregates in ONTAP 9.8? (Choose two.) StorageGRID Object Storage SWIFT Object Store S3 Object Store NFS Export.
When you perform an upgrade using ONTAP System Manager 9.8, which two statements are true? (Choose two.) The images must be manually uploaded to the cluster by using the ONTAP System Manager interface The latest available images will appear in the ONTAP System Manager interface The images will be automatically uploaded to the cluster by using the ONTAP System Manager interface from the NetApp Support site The update history is available within the ONTAP System Manager interface.
Which two storage efficiency features are enabled by default on AFF systems? (Choose two.) volume-level inline deduplication aggregate-level compression LUN level compression aggregate-level inline deduplication.
You want to prepare your ONTAP cluster and your ESXi cluster to connect NFS datastores over a 10-GbE network using jumbo frames.
In this scenario, which three configurations would accomplish this task? (Choose three.) Enable jumbo frames with an MTU of 1500 for your ESXi hosts Enable jumbo frames with an MTU of 9000 for your ONTAP cluster Enable jumbo frames with an MTU of 1500 for your ONTAP cluster Enable jumbo frames with an MTU of 9000 for your ESXi hosts Enable jumbo frames with an MTU of 9216 for your switches.
After creating several volumes, you notice that the hosting aggregates immediately show a decrease in available space.
Which volume setting would prevent this outcome? space guarantee set to “volume” space SLO set to “semi-thick” space guarantee set to “none” space SLO set to “thick”.
You are the administrator of an ONTAP 9.8 cluster. You have configured an hourly snapshot schedule for all NAS volumes. One of your users accidentally deleted an important spreadsheet file on an SMB share. The file needs to be restored as quickly as possible by the Windows user.
Which statement is correct in this scenario? In Windows Explorer, right-click on the SMB share where the file was deleted, go to previous versions select the file and copy it to the original location. On the cluster CLI, execute the volume snapshot restore-file command with the options to select the SnapShot, path, and restore-path. On the cluster CLI, execute the volume clone create command with the -parent-snapshot option set to the latest Snapshot copy and share the cloned volume as an SMB share, then copy the file back. In ONTAP System Manager, navigate to the volume where the share resides, click on snapshot copies and restore the latest SnapShot copy.
Your manager asks you to create a new FlexVol on an aggregate called AGGR_2. When you click "Create new FlexVol", you are unable to select AGGR_2 to create the new volume.
Referring to the exhibit, which two SVM settings solve this problem? (Choose two.) In the resource allocation tab, select the "Delegate volume creation" option and select AGGR_2. Use the volume move option and reallocate the SVMs root volume to AGGR_2. In the resource allocation tab, select the "Do not delegate volume creation" option. Change the aggregate security style of AGGR_2 to UNIX.
Which two statements about replicating FlexGroup volumes are true? (Choose two.) You can increase the capacity of a FlexGroup volume that is being replicated. The SnapMirror relationship type must be DP You cannot perform a resync on a FlexGroup SnapMirror relationship after it has been broken. The SnapMirror relationship type must be XDP.
Which two objects are supported in a FlexVol volume? Aggregate Qtree RAID group LUN.
An administrator has an SVM named SVM_NAS that is used for NFS clients. You change the volume junction path of a volume named vol1 from /vol1 to /IT/vol1. After you make this change, the existing NFS clients are unable to connect to the new path.
Which cluster object should you update to solve this problem? the load-sharing mirror of the SVM root volume the cluster admin LIF the data LIF on the SVM_NAS SVM the export policy on the SVM_NAS SVM.
Your company has recently decided to stop using the Fibre Channel Protocol (FCP) in the data center. You are asked to decommission FCP and reuse any UTA2 ports to 10 GbE. Which two steps are involved in this task? (Choose two.) Reboot the nodes Destroy any FC LIFs hosted on UTA2 ports. Remove the FCP license from all nodes in the cluster. License additional ports for 10 GbE connectivity.
You are using NetApp Volume Encryption (NVE) on an AFF system.
In this scenario, which two key-management solutions are supported for NVE? (Choose two.) A KMIP Server An SSH key manager The onboard key management service an XTS-AES-256 key manager.
When deploying NVMe/FC, what must be supported and enabled on the host to ensure proper multipathing? NVMe Qualified Names (NQN) Asynchronous Namespace Access (ANA) Single initiator multiple target zoning Asymmetric Logical Unit Access (ALUA).
What are three firewall policies? (Choose three.) Cluster Node Data Management Intercluster.
Your company is merging with another company. You are asked to set up your AFF A400 cluster to support two networks that have the same overlapping 192.168.1.0/24 subnet.
In this scenario, what must you create, to enable the same subnet with overlapping IPs on the same cluster? Broadcast Domain IPspace Subnet Failover Group.
You have a FAS8200 serving a dataset with a high volume of random reads. The dataset is highly optimized by deduplication and compression.
In this scenario, which compression setting provides both high performance and storage efficiency? Secondary compression Compression disabled Aggregate compression Adaptive compression.
You are asked to separate replication and data traffic into their own individual VLANs. You created two new VLANs and need to create logical interfaces (LIFs). In this scenario, what must you do before creating the LIFs? Create a firewall policy. Create an interface group. Create a network subnet Create a broadcast domain.
You configured LACP between a 2-node AFF 220 system and two Ethernet switches using multichassis Ether-channel for redundancy. You sent the network connection diagram in the exhibit to your network team to cable and configure the switch. You noticed partial connectivity on the AFF A220 for the interface groups.
Referring to the exhibit, which two statements are correct? (Choose two.) ONTAP does not have a multichassis Ether-channel feature. The network team forgot to verify the port channel members. 10 GbE ports are not supported with the AFF A220. The storage cabling to the switches is incorrect.
You want to use external tools to monitor your ONTAP cluster’s performance metrics so that your operations team does not have to log in to the cluster. Which three tools allow you to accomplish this task? (Choose three.) OnCommand Insight OnCommand Workflow Automation Active IQ Unified Manager ONTAP System Manager Cloud Insights.
How many global namespaces are there in a 4-node ONTAP cluster that has a single SVM? 1 4 8 2.
You have a new ONTAP 9.7 2-node AFF A300 cluster with 2x DS224C full shelves of 3.8 TB encrypted SSDs.
In this scenario, which statement matches the factory disk-ownership setting? All drives on shelf 1 are assigned to one node, and all drives on shelf 2 are assigned to the partner node. All even-numbered drives on each shelf are assigned to one node, and all odd-numbered drives on each shelf are assigned to the partner node. Disk ownership is not assigned by the factory. Drives 0-11 on each shelf are assigned to one node, and drives 12-23 on each shelf are assigned to the partner node.
You must enable remote authentication and grant a remote administrator either cluster admin or vsadmin access.
In this scenario, which three authentication types are supported for ONTAP 9.7? (Choose three)
LDAP AD SAML NIS Local.
A customer uses Active IQ Unified Manager to configure SnapMirror relationships.
In this scenario, which statement is true? Active IQ Unified Manager and OnCommand WFA have licensing dependencies Active IQ Unified Manager uses the OnCommand WFA API. Automation works directly through Active IQ Unified Manager and later versions. Active IQ Unified Manager and OnCommand WFA cannot be installed on or work with the same
cluster.
You are configuring your tape backup software to authenticate to your single-node cluster by using NDMP. Referring to
the exhibit, which LIF do you use to connect? cluster_mgmt cluster1-01_ic1 cluster-01_mgmt1 data_lif1.
Referring to the exhibit, a customer is experiencing performance problems on an SVM supporting NVMe/FC. You
review the physical FC ports that are connected into the 32 Gbps switches for cluster tme-a700.
In this scenario, what is causing the performance problems? Port 2a needs more network interfaces added to the physical port. Port 2b has a 16 Gbps SFP+ installed. Port 2a needs a 16 Gbps SFP+ installed. Port 2b has two many LIFs running across the physical port.
You are planning to present storage to your servers from your AFF system using FC protocol. You have a pair of FC
switches to ensure connectivity and you have decided to use WWPN zoning.
Referring to the exhibit, which two WWPNs do you use for your configuration? (Choose two.) fc-2 WWPN fc-1 WWPN 0d WWPN 0c WWPN.
You have an SVM-DR relationship as shown in the exhibit. You are given a new requirement to use SnapMirror Synchronous (SM-S) for the data volumes in NFS-SVM-01.
In this scenario, which solution is supported to enable SM-S in ONTAP 9.8 software? Set up new SM-S relationships from the FAS2720 to a new destination Set up NetApp Cloud Sync with a cloud broker in AWS to replicate to a new destination Modify the existing SVM-DR policy to use sync mode Set up new SM-S relationships from the AFF A220 to a new destination.
You attempt to create an SVM for CIFS access only.
In this scenario, which three actions must be performed to join the existing Active Directory? (Choose three.) Create DNS entries Create a cluster LIF Create a data LIF Create NTP entries Create export policies.
You are an administrator that manages a number of mission-critical applications that use block protocols only. The business unit requires the fastest storage failover. All SAN Array (ASA) with symmetric active-active topology ONTAP Select with Asymmetric Logical Unit Access (ALUA) AFF with Asymmetric Logical Unit Access (ALUA) FAS with symmetric active-active topology.
Which three name services are supported with NFS? (Choose three.) NetBIOS WINS External NIS domains (NIS) External LDAP domains (LDAP) Local Users (file).
A storage administrator has an existing FAS2554 HA pair. They want to add a new FAS2620 HA pair to the cluster. The SAN protocols are licensed.
Referring to the exhibit, after adding the second HA pair, how many more nodes are available to add for future use? 4 8 2 12.
What are two methods to improve system administration access control security on your ONTAP environment? (Choose two) Enable two-factor authentication for SSH access. Enable SAML Authentication using an Identity Provider that supports multi-factor authentication. Enable Onboard Key Manager to encrypt volumes. Enable encrypted cluster peering for peering relationships using the cluster modify command.
Which two statements are true when you restore a volume from a Snapshot copy? All Snapshot copies that were created after the Snapshot copy was created are lost. All data that was written to the volume after the Snapshot copy was created is lost. The volume’s SnapMirror relationships need to be re-created. After the volume is restored, it becomes read-only.
An administrator is designing an ONTAP solution that consists of eight FAS8200 nodes in a single cluster. Each node will use four ports for cluster connections.
Which cluster interconnect switch model should be used in this scenario? Nexus 5596UP Nexus 5010 CN1610 CN1601.
Which three steps are required to serve NFS exports from your ONTAP system? You must create an export policy rule. You must license CIFs You must create an SMB share. You must license NFS You must have provisioned a volume to export.
On your customer's AFF A700, there are multiple volumes within the aggregate aggr1. Within aggr1, volumes vol1, vol2, and vol3 store similar data, and volumes vol4 and vol5 store unique data.
In this scenario, which feature would improve storage efficiency with the data stored in volumes vol1, vol2, and vol3? Postprocess compression Data compaction Inline aggregate-level deduplication Inline compression.
You need to move a FlexVol volume from one SVM to another.
In this situation, which command would accomplish this task? volume create volume rehost volume modify volume move.
Node A has taken over Node B. You solved the issue that caused the takeover and are now ready to resume normal operation.
After initiating the storage failover giveback command, how are the aggregates given back? CFO aggregates are automatically given back, SFO aggregates must be manually given back. CFO aggregates and SFO aggregates are automatically given back. The root aggregate is automatically given back, CFO and SFO aggregates must be manually given back. SFO aggregates are automatically given back, CFO aggregates must be manually given back.
You created a new SVM with two NFS data volumes. You have a Linux host on the same subnet as the SVM that is able to NFS mount, however a Linux host on a different subnet is not able to NFS mount.
You confirmed that the export policy rules are correct.
In this scenario, which configuration will solve the mount failure? The NFS server is not configured on the SVM NTP is not configured on the SVM NFS auditing is not enabled on the SVM The SVM default network route is missing.
While troubleshooting performance issues, you notice that only one port in the NetApp interface group a0a is actively sending or receiving data.
Referring to the exhibit, what should you do to ensure that both ports in the interface group are actively used? Change the interface group mode to multimode_lacp. Verify that the network switch has flow-control enabled. Verify that the physical cabling is properly connected to ensure a network link. Change the distribution function to ip.
What are two advantages of creating small RAID groups inside an aggregate? (Choose two.) Maximized storage space Decreased risk of multiple disk failure Shorter reconstruction time Additional available spare drives.
A volume is only 25% full; however, the snapshot reserve is almost full.
Referring to the exhibit, what occurs after the volume's snapshot reserve is full? User-created Snapshot copies are deleted, beginning with the oldest, until the snapshot reserve has 20% free space. Scheduled Snapshot copies are deleted, beginning with the oldest, until the snapshot reserve has 20% free space. Snapshot copies start consuming the volume's free space. The creation of new Snapshot copies fails.
When performing a manual MetroCluster switchover, which two statements are true? (Choose two.) Only the user specified DR groups are switched over. All SVMs in the disaster site are switched over. All DR groups in the disaster site are switched over. Only the user specified SVMs are switched over.
You currently have an 8-node cluster and want to perform a rolling upgrade to a newer version of ONTAP to solve security issues reported in the Active IQ Web site.
In this scenario, which two steps should you validate before you perform the upgrade? (Choose two.) Run Active IQ Config Advisor. Validate Nodes with Hardware Universe. Validate Nodes with Active IQ Unified Manager. Run Upgrade Advisor Report.
In which scenario would you specifically assign aggregates to SVMs? to configure an ONTAP system for CIFS and iSCSI to create SnapMirror peering relationships between SVMs to prevent a storage administrator from overcommitting an aggregate to configure an ONTAP system for multi-tenancy.
You want to improve the write performance of NL-SAS volumes serving data on your ONTAP. You also want to keep the performance consistent during a possible controller failover. Flash Cache Flash Pool FlexCache FabricPool.
You must expand an existing FAS8200 switchless cluster to a switched cluster and add a new FAS8200 HA pair in the cluster.
In this scenario, which three actions would you perform to expand the cluster? (Choose three.) Ensure that the switchless-cluster network option is false. Connect the existing nodes to the cluster switches. Change the cluster ports for the existing HA pair. Ensure that the switchless-cluster network option is true. Join the new HA pair to the cluster.
Which block protocol does ONTAP Cloud support? iSCSI FCoE NFS CIFS.
When FCOE is used in a cluster, which feature must be licensed? CIFS NFS iSCSI FCP.
You execute the volume unmount -vserver vsl -volume vol1 command. Data within the vol1 volume is lost. All data within the junction point is inaccessible to NAS clients. The Snapshot policy in the volume needs to be recreated once the volume is remounted. The existing volume export policies and SMB shares created on the volume or on directories and junction points within the unmounted volume are not retained.
An administrator needs to configure ports for peering.
Referring to the exhibit, which ports should be used? CDOT93-01:e0a and CDOT93-02:e0a CDOT93-01:e0e and CDOT93-02:e0e CDOT93-01:e0d and CDOT93-02:e0d CDOT93-01:e0f and CDOT93-02:e0f.
How would you protect a NAS SVM root volume? Create a SnapMirror copy of the root volume to a peer cluster. Create load-sharing mirrors.
Create a backup the SVM configuration. Create a backup of the SVM root volume.
You have a mission-critical SQL application that uses a single SMB 3.1.1 share to host its database. The storage node that is hosting the SMB share sql01_ca for the SQL database experiences a hardware failure and fails over to the surviving node.
Referring to the exhibit, what is the state of the SMB share for the SQL database during the failover? The SMB share will be available, but all data is corrupted. The SMB share will be unavailable until node failback. The SMB share will be available, and all data is accessible. The SMB share is unavailable due to its stateful nature.
Which commands shows the data compaction savings for an aggregate? storage aggregate show-space storage aggregate show-efficiency volume efficiency show storage efficiency show.
Which two components are required for committing data to a WORM volume? (Choose two.) You must license SnapLock. You must create a SnapLock volume. You must create a SnapLock SVM You must create a SnapLock Aggregate.
An administrator is configuring a third-party software for NDMP. The application is targeting the IP of the data LIF of the SVM called "SVM1". "NDMP" is configured as the SVM scope.
The NDMP service is not enabled for the admin SVM. SVM1 has a user called "Tom" with the backup role. Tom can connect by using SSH to the controller with the credentials that he used to configure the third-party software. The authentication of the third-party software is failing.
In this scenario, what is the reason for the authentication failure? The NDMP password has not been generated for Tom. The application is not targeting the IP of the cluster or node management LIF The NDMP service is not enabled for the admin SVM. The user Tom does not belong to the admin SVM.
You want to use UTA2 ports for native FC LUN access. Configure the UTA2 ports as target ports with 16 Gb SFP+ transceivers. Configure the UTA2 ports as target ports with 10 Gb SFP+ transceivers Configure the UTA2 ports as initiator ports with 10 Gb SFP+ transceivers Configure the UTA2 ports as initiator ports with 16 Gb SFP+ transceivers.
An administrator is configuring an aggregate to use FabricPool to take advantage of auto tiering.
In this scenario, what are three requirements to accomplish this task? (Choose three.) Volume with space-guarantee none FabricPool license Intercluster LIFS Volume with space-guarantee volume AFF array.
Which mediator type is required for an ONTAP Select 2-node HA solution? Mediator Code Mediator storage virtual machine Mediator Cluster Mediator virtual machine.
Assuming that the export policy on the storage allows access, you want to enable client access to the finance volume in the departments SVM in the /tmp/fin directory.
Referring to the exhibit, which UNIX command must be executed to accomplish this task? mount Ct nfs Co nfsvers=3 cluster01:/finance /tmp/fin mount Ct nfs Co nfsvers=3 cluster01:/fin /tmp/fin mount Ct nfs Co nfsvers=3 cluster01:/dept/fin /tmp/fin mount Ct nfs Co nfsvers=3 cluster01:/departments/finance /tmp/fin.
An export policy rule for a volume is set by using the command shown in the exhibit.
If clients with IP addresses 10.64.19.0 and 10.64.18.20 accessed the export, what is the outcome? Neither client is given access Client 10.64.19.0 is given access but 10.64.18.20 is not given access. Client 10.64.19.0 is not given access but 10.64.18.20 is given access. Both clients are given access.
Your company requires that all data must be encrypted in flight to prevent data from falling into the wrong hands.
What are two ways to accomplish this task? (Choose two.) Ensure that SnapMirror compression is enabled in all SnapMirror relationships. Modify your cluster peering relationships to support cluster peering encryption. Enable Multi-Factor Authentication (MFA) for your SnapMirror relationships. Ensure that all intercluster replication traffic is done through a VPN tunnel.
On which two types of ports would data LIFs be hosted? (Choose two.) physical ports or interface groups that host VLANs management e0M port console RJ45 port physical ports that are not part of interface groups.
You relocate an aggregate to a different node by using the storage aggregate relocate command. You cannot relocate an aggregate that is hosting a FlexGroup constituent volume. You can only relocate an aggregate to the HA partner node. You can only relocate an aggregate that is not assigned to a specific SVM You must first break the relationship to move an aggregate that hosts a replication destination.
Which three statements are true for mailbox disks per node in an HA pair? (Choose three.) Six disks are required if the root volume is on a mirrored aggregate. Two disks are required if the root volume is on a disk shelf. Four disks are required if the root volume is on a mirrored aggregate. Eight disks are required if the root volume is on partitioned disks. One array LUN is required if the root volume is on a storage array.
To configure high availability within a FAS8080 EX HA pair, which two statements are correct? (Choose two.) Connect the NVRAM HA interconnects between the nodes in the HA pair. Cable the cluster interconnects to the interconnect switch. Connect multiple FC paths from the controllers to the hosts. Connect both the local node and partner node to disk shelves using multipath HA.
Referring to the exhibit, which connections are used for the cluster interconnect LIFs? 1 2 3A 3B.
An administrator notices that the applications are running slowly. The administrator wants to determine which component on the ONTAP subsystem is experiencing the most latency.
In this scenario, which command would you use to accomplish this task? run -node * stats show system::sys_avg_latency statistics system show run -node * -command sysstat -x 1 qos statistics latency show.
You have a FAS8200 HA pair with disks that are evenly split between nodes A and B. When a disk fails, the replacement disk must automatically assign back to the originally assigned controller, A or B.
Referring to the exhibit, which disk auto assign policy satisfies this requirement? Stack Bay Default Shelf.
At which level of granularity would you back up data to tape using the SMTape command? directory qtree volume aggregate.
You have a RAID-DP aggregate with 42x 4 TB NL-SAS drives. The aggregate contains 3x RAID groups of 14 drives each (12 data + 2 parity), for a total of 36 data and 6 parity drives. You decide to convert the aggregate to RAID-TEC for higher resiliency.
How many spare 4 TB drives are needed to complete the conversion? 1 2 4 3.
Which failover policy is set by default on an iSCSI LIF? local-only broadcast-domain-wide disabled sfo-partner-only.
You have a 4-node NetApp SAN cluster configured as shown in the exhibit.
By default, how many LUN paths does the host see for a newly created LUN on Node 01? 2 1 8 4.
Which three data protocols are supported simultaneously in a single storage virtual machine (SVM) CIFS iSCSI HTTPS FCP Infiniband.
You have a test SVM named svm1 with a LIF that needs to reach a DNS server on a different Layer 2 network. The default route for each network ends in .1 and both networks route to each other.
Referring to the network command output shown in the exhibit, which command will allow access from svm1 to lab.local DNS? network route create -vserver svml -destination 192.168.0.0/24 -gateway 192.168.2.1 -metric 20 network route create -vserver svml -destination 0.0.0.0/0 -gateway 192.168.2.1 -metric 20 network route create -vserver svml -destination 0.0.0.0/0 -gateway 192.168.0.1 -metric 20 network route create -vserver svml -destination 192.168.0.0/24 -gateway 192.168.0.1 -metric 20.
The exhibit displays the values for the default adaptive QoS policy. An administrator assigns the Value policy to a 1 TB volume. Over time, the volume expands to 3 TB.
What is the peak IOPS for the volume, both before and after the expansion? 512 IOPS and 512 IOPS 512 IOPS and 1536 IOPS 512 IOPS and 12288 IOPS 75 IOPS and 512 IOPS.
You want to prevent a single file from filling up a single constituent in a FlexGroup.
Which FlexGroup feature in ONTAP 9.7 will accomplish this task? Flashpool Fractional reserve Snapshot autodelete Elastic sizing.
A customer has lost access to shares being used by an application.
What are three troubleshooting steps the administrator should take? (Choose 3) Verify that the admin SVM is running on the node being accessed by the customer. Verify that the LIF resides on its home port. Verify that the LIFs in the SVM are all up and active. Verify that the SVM has CIFS running, that the share exists, and is online. Verify that there is network connectivity between the SMB client and the SV.
Regarding root partitioned disks in an ONTAP system, which three types of objects are associated with ADP? Root partition Array LUN Data partition Shared disk Container disk.
cluster1::> volume create -vserver vs1 -volume vol1 -aggregate aggr1 -encrypt true
Which statement regarding the command shown in the exhibit is true? The volume will be created and protected on an aggregate using NetApp Storage Encryption (NSE) disks. The volume will be created and protected using an external Key Management Server. The volume will be created and protected for Snaplock Enterprise compliance. The volume will be created and protected using NetApp Volume Encryption (NVE).
Which two features are supported on NetApp ONTAP? SnapMirror FlexCache Fiber channel Storage Pool.
How many admin SVMs are there in a cluster with 4 HA pairs? 8 4 2 1.
Which items are optional in Netapp? LUNs Volumes Qtrees Disks Aggregates.
Protocols; assign each type of protocol NFS CIFS FC iSCSI.
Which two deployment options are software-defined? ONTAP deployed on a FAS system ONTAP deployed on an AFF system ONTAP deployed on commodity hardware ONTAP deployed in the cloud ONTAP deployed by using a heterogenous enterprise array?.
Which pair of components is a major part of data SVMs Aggregates and network ports Disks and nodes Data LIFs and aggregates Volumes and data LIFs.
A volume called svm1_vol2 is created on aggr 2 aggregate and mounted to the junction path /svm1_vol2. An administrator moves the volume to aggr1 agrgegate. After the move, what is the path to the volume? /aggr1/svm1/svm1_vol2 /svm1/vol2 /vol/svm1_vol2 /aggr1/svm1_vol2.
When you create a storage VM to support SAN protocols, which configuration steps need to be made? (Choose 3) Configure a SAN LIF on each cluster node Choose an IPspace for the storage VM Create an interface group (ifgroup) Create a storage VM management LIF.
Which types of data compression are available in NetApp ONTAP software inline and external inline and preprocess inline and postprocess inline and reclaimable.
True or false: Data can be written to a FlexClone volume True False.
True or False: A Flexclone volume, by definition, shares no data blocks with the parent volume? True False.
A SnapMirror relationship is created between which two storage objects? Volumes Aggregates Storage VMs LUNs.
Which three statements about SnapMirror are true? It provides synchronous data replication. It provides asynchronous data replication It provides aggregate-level data protection SnapMirror relationships do no need to be re-established when a source volume is moved. Snapmirror relationships must be reconfigured when a source volume is moved.
True or False: Data can be written to a Snapshot copy? True False.
You want to set up a SnapMirror relationship between two volumes. Your source volume has compression enabled. In this scenario, if compression savings on the destination volume are required, what is the recommended practice? To avoid transferring uncompressed data to the destination over the network, do not enable compression on the destination To automatically inherit compression savings on the destination, enable compression on the destination To avoid transferring uncompressed data to the destination over the network, enable compression on the desitnation Do not enable compression on the destination because the compression type cannot be changed on the destination later.
Which two locations could be targets of ONTAP S3 buckets? (Choose 2) Amazon S3 ONTAP S3 buckets Cloud Volumes for ONTAP Google Cloud Azure NetApp Files Cloud Volumes Service.
Which two statements about SnapMirror Synchronous are correct? (Choose two) Supports FC, NVMe/FC, SMB2.0 and later, NFSv3, NFSv4.0 and NFSv4.1 protocols Supports two fan-out deployments with SnapMirror Synchronous relationship Supports cascading with primary, secondary and tertiary volumes in a SnapMirror Supports manual or scripted application failover to destination copy Support automatic and managed failover.
You want to replicate an entire SVM configuration. The source and destination SVMs are on different subnets. Which set of options do you use when configuring the SnapMirror relationship? -identity-preserve true AND -discard-configs network -identity-preserve false AND -discard-configs network -identity-preserve true AND -discard-configs true -identity-preserve false AND -discard-configs true.
Which statement about LIF failover policies is true? Failover policies are assigned to failover groups Failover policies can be created to control LIF failover behaviour Failover policies define how ports are selected during LIF failover Failover policies define how LIFs are assigned to failover groups.
Which statement is true about Advanced Disk Partitioning? Both nodes must have a root partition and a data partition assigned Both nodes must have a root partition assigned Data partitions can be assigned to any node in a cluster Root partitions can be assigned to any node in a cluster.
What does a Flash Pool aggregate contain? HDDs only SDDs only HDDs for data storage and SDDs for caching HDDs and SDDs that are all used for data caching.
Where do you find the Upgrade Advisor Tool, which you can use to plan a Netapp ONTAP upgrade? In Netapp ONTAP System Manager On the Tools page on the NetApp support site On the downloads page at upgradeontap.netapp.com On the Active IQ page on the NetApp support site.
Which three intervals does NetApp ONTAP software follow when creating cluster configuration backup files? (Choose 3) Every hour Every 8 hours Every 12 hours Daily Weekly Monthly.
Which set of networks is part of a cluster? data network, management network, and cluster interconnect data network, high-availability (HA) interconnect and cluster interconnect high-availability (HA) interconnect cluster interconnect and backup network data network, cluster interconnect and backup network.
Client data that is passed between cluster nodes travels over which links? HA interconnect Cluster interconnect Management network Data network.
What are 4 valid types of ONTAP licenses? (Choose 4) Capacity Site Evaluation Expansionary Provisional Standard.
Which ONTAP software feature provides volume-level synchronous data replication? SnapCenter SnapMirror SnapLock Snapshot.
Which Netapp solution provides continous data availabilitty for mission-critical applications across geographically separated data centers? MetroCluster software SnapMirror software SnapLock software SnapMirror Cloud.
Which ONTAP feature provides software-based, data-at-rest encryption of a volume on any type of drive where unique keys for each aggregate are enabled on the volume? SnapLock software NetApp Storage Encryption NetApp Volume Encryption NetApp aggregate encryption.
Which NetApp product provides application-consistent data protection for applications and databases? Cloud Insights Active IQ Digital Advisor SnapCenter software Active IQ Unified Manager.
You must establish a peer relationship with another cluster. You need to configure the cluster peer offer now, but the other cluster's administrator cannot complete the peer authentication for several hours. What can you do in this situation? Run multiple "cluster peer create" commands from your cluster Use the "cluster peer create -offer-expiration" command to extend the cluster peer offer beyond the default time Wait until the other cluster administrator is available, and then proceed to establish the peer relationship. Create cluster peering in one cluster, and the details are automatically populated in the other cluster.
Which two statements about the passphrase used to peer two clusters are correct? (Choose two) The passphrase is exchanged on the network by ONTAP software between the peering clusters The passphrase must be at least eight characters The passphrase on the peering clusters can be different The passphrase on the peering clusters must be the same.
Which option do you use with the "volume modify" command to exclude SVM volumes from replication? -vserver-dr-protection disabled -vserver-dr-protection false -vserver-dr-protection off -vserver-dr-protection unprotected.
Which version of NDMP does ONTAP software support? 1 2 3 4.
Which three protocols does Cloud Volumes ONTAP support for accessing data from a client application? (Choose 3) NFS iSCSI SMB FC FCoE.
Which Netapp tool do you use to deploy and update Cloud Volumes ONTAP? Cloud Manager ONTAP System Manager NetApp Active IQ Unified Manager NetApp Virtual Storage Console software client plug-in.
Which of the following ONTAP deployment options can provide disaster recovery, backup and archive at both volume and storage VM level? Cloud Volumes ONTAP for AWS Cloud Volumes Service for Google Cloud Cloud Volumes ONTAP for Azure Amazon FSx for ONTAP.
SnapMirror Business Continuity support which two protocols? NFS iSCSI FC SMB.
SnapMirror Business Continuity supports which cluster configurations at the primary and secondary sites? Only 2-node FAS or AFF clusters at both sites Only 2-node AFF or ASA clusters at the primary site and 1 or 2-node AFF or ASA clusters as the secondary site Only 2-node AFF clusters at the primary site and 1 or 2-node clusters at the secondary site Only 2-node AFF or ASA clusters at both sites.
You installed MetroCluster TieBreaker software in observer mode. A disaster causes the primary site to fail. What do you do? Nothing. MetroCluster TieBreaker software performs an automated switchover Turn off the SAN switches to prevent a split-brain scenario Use the "metrocluster switchover -forced-on-disaster true" command to initiate the switchover of storage and client access to the secondary site Use the "metrocluster check" command to verify that switchover is possible.
What enables MetroCluster IP to perform automated unplanned switchover? data broker ONTAP Mediator service SyncMirror feature consistency group.
An application owner at your organization requests a solution for zero RTO in the event of a failure in your primary data center, where you are using NetApp ONTAP 9.8 software with iSCSI LUNs. The owner wants to avoid reconfiguring the application.
Which NetApp solution would you propose to fulfill these requirements? SnapMirror Synchronous (SM-S) SVM Disaster Recovery (SVM DR) SnapMirror Business Continuity (SM-BC) SyncMirror.
Which two statements about VM peering are correct? (Choose 2) System Manager automatically peers storage VMs when creating the protection relationship When using the System Manager, you must peer the storage VM´s before creating the protection relationship One storage VM can be peered with multiple storage VMs only across clusters One storage VM can be peered with multiple storage VMs within a cluster or across clusters.
|
