OperaciónC

A company is deploying a new FortiGate using zero-touch provisioning to streamline its setup. The IT team has already registered the FortiGate serial number on FortiManager and preconfigured its settings in advance. FortiGate is in its factory default state. However, after connecting FortiGate to the network, FortiManager does not automatically initiate the provisioning process. Which two scenarios are likely to cause this issue? (Choose two.). The pre-shared key set on FortiManager does not match the one set on FortiGate. The DNS server doesn't have the A or AAAA records configured. Zero-touch provisioning is disabled on FortiManager. The serial number added on FortiManager does not match the FortiGate serial number.

Refer to the exhibit. Port2 on FortiSwitch is configured with an 802.1X authentication security policy, but a device connected to port2 is unable to access the network. The administrator has gathered the diagnose output, as shown in the exhibit, to investigate the issue. Which two scenarios could explain why the device is failing to gain network access? (Choose two.). The device does not support 802.1X authentication. The device is not configured for 802.1X authentication. The device has been quarantined for 3600 seconds. The device has been assigned the guest VLAN.

An administrator is reviewing FortiSwitch trunk configurations. Which two statements accurately describe the functionality of FortiSwitch trunks? (Choose two.). FortiSwitch connecting to FortiGate uses the Fortinet Discovery Protocol (FDP) to automatically form a trunk. FortiSwitch trunks can only connect to other FortiSwitch devices and not to a FortiGate. FortiSwitch uses trunk to refer to a LAG interface. FortiSwitch connecting to the FortiGate FortiLink interface automatically forms a trunk.

Refer to the exhibits to analyze a network topology and SSID settings. FortiGate is configured to use an external captive portal for authentication to grant access to a wireless network. Testing detected that users attempting to access the SSID are not able to access the captive portal login page. Which configuration change should fix this issue?. Firewall policy with the ID 13 must have NAT disabled. Address objects FortiAuthenticator and WindowsAD must be included as exempt destinations/services. Change the SSID security mode to WPA2-Enterprise for authentication. A firewall policy with port4 as source is missing.

When deploying a FortiSwitch in a network managed through FortiLink, how does the FortiGate facilitate communication to the FortiSwitch?. FortiGate establishes communication with FortiSwitch using a pre-configured VLAN without requiring DHCP. FortiSwitch requires internet access to register its license in order to connect with FortiGate over FortiLink. FortiGate acts as a DHCP server and provides the FortiAP with an IP address over FortiLink. FortiSwitch initially requires to be configured with static IP addresses to function over FortiLink.

When troubleshooting a FortiLink connectivity issue between FortiGate and FortiSwitch, why is it important to verify their time and date settings?. Matching time settings ensure proper STP convergence on the FortiLink interface. Time synchronization is critical for the CAPWAP DTLS tunnel. Time and date are used to determine the encryption algorithm on FortiLink. Incorrect time synchronization may disrupt the FortiLink discovery protocol (LLDP or MCLAG).

You are troubleshooting an issue where users are being intermittently redirected to an error page after submitting their login credentials on a captive portal. As part of your troubleshooting steps, you review the POST parameters sent from the client to the authentication server. What should you check in the magic ID within the POST parameters to help resolve the issue?. Confirm that the magic ID is tied to the correct redirection URL for the user session. Determine whether the magic ID has expired, which could cause the server to reject the authentication request. Validate that the magic ID contains encryption keys for securing the user's password during transmission. Verify whether the magic ID matches the session generated by the server to ensure the request is valid.

In which two ways is layer 2 isolation applied to a quarantined device? (Choose two.). By blocking communication based on the device's MAC address. By assigning the quarantined device to a separate VLAN. By blocking communication based on the device's IP address. By configuring route policy rules to restrict traffic. Contact us on Whats. By assigning a null route based on the device's IP address.

A network administrator is configuring a RADIUS server on FortiGate to authenticate remote users. The administrator configures FortiGate to forward authentication requests to FortiAuthenticator, which then proxies these requests to a Windows Active Directory (AD) server using LDAP. What is the primary benefit of using FortiAuthenticator in this configuration?. This configuration provides a solution to the CHAP-to-LDAP dilemma, enabling MSCHAPv2 authentication. FortiAuthenticator simplifies the configuration by allowing FortiGate to use LDAP directly for authentication without the need for RADIUS. This configuration allows FortiGate to directly authenticate remote users against Windows Active Directory without the need for an intermediate proxy. FortiAuthenticator encrypts the RADIUS authentication traffic between FortiGate and the AD server, securing communication.

What is the primary purpose of configuring an untagged VLAN on a FortiSwitch port in a network deployment?. To enable QoS (quality of service) on the port. To carry multiple VLANS on a single port. To automatically tag traffic from connected devices. To enable features like quarantine MAC or dynamic VLAN assignment.

Refer to the exhibits. You are configuring FortiAuthenticator to authenticate wireless users through Active Directory using LDAP. The users send their authentication requests to FortiAuthenticator through RADIUS, with FortiAuthenticator serving as the back-end authentication server. On FortiGate, a RADIUS server pointing to FortiAuthenticator has been configured. Although the connection to the RADIUS server is successful on FortiGate, authentication for the wireless users fails. After reviewing the configurations on both FortiGate and FortiAuthenticator, you notice that the RADIUS Service Policy appears to be misconfigured. Which configuration step might be missing?. In the Identity Sources section, select a different Username format. In the Identity Sources section, enable Windows AD Domain Authentication. In the Authentication Factors secion, select Password-only. In the Authentication Factors section, enable Adaptive Authentication.

You need to optimize your wireless network to improve performance and reliability in a dynamic environment. The network must adapt to changes in the radio frequency (RF) environment, such as interference, new devices, and fluctuating traffic patterns. Which role does FortiAlOps play in monitoring and automatically adjusting to changes in the radio frequency (RF) environment?. To monitor network traffic and recommend firewall rules in real time. To limit the number of devices connected to each access point in a given area. To increase the signal strength of the network if required by modulating power levels on all access points. To detect and report interference and congestion, helping to optimize wireless performance and coverage.

What are three key components of the 802.1X authentication process? (Choose three.). Gateway. Authentication Server. Authenticator. Authentication Service. Supplicant.

Refer to the exhibits. You are adding a new FortiSwitch to FortiGate for management. All necessary settings have been configured on FortiGate, but FortiSwitch remains offline. The cabling has been verified and is correctly connected. Which misconfiguration might be preventing FortiGate from detecting FortiSwitch?. The Fortilink interface has the wrong interface member. The Fortilink interface setting type must be physical. The DHCP server setting voi-string is misconfigured. The Fortilink interface setting ip-managed-by-fortiipam must be enabled.

Refer to the exhibit. What can you conclude if you are accessing the FortiSwitch ports menu on FortiManager?. FortiSwitch is in standalone mode. FortiSwitch is in transparent mode. The ADOM is configured to support FortiSwitch per-device- management. The ADOM is configured to support FortiSwitch central management.

Refer to the exhibit. The exhibit shows an LDAP server configuration with the Username setting has been expanded to display its full content. The administrator has configured the LDAP settings on FortiGate and is troubleshooting for authentication issues. As part of the troubleshooting steps, the administrator runs the command dsquery user -samid student on the Windows Active Directory (AD) server with an IP address 10.0.1.10 and received the output CN-student, CN=Users, DC-trainingAD, DC-training, DC-lab. Based on the dsquery output, which LDAP setting on FortiGate is misconfigured?. The Bind Type is incorrectly configured, preventing FortiGate from connecting to the LDAP server. Server IP/Name is misconfigured so FortiGate can't reach the LDAP server. The Distinguished Name setting is incorrectly configured, causing issues with user authentication. he Common Name Identifier is incorrectly set, causing authentication failures.

How does Syslog SSO on FortiAuthenticator establish user identity?. By intercepting and decrypting network traffic to extract user credentials. By directly communicating with the domain controller to retrieve user login events. By using predefined user credentials stored on FortiAuthenticator. By parsing syslog messages from network devices to extract user login events and associate them with IP addresses.

A conference center wireless network provides guest access through a captive portal, allowing unregistered users to self-register and connect to the network. The IT team has been tasked with updating the existing configuration to enforce captive portal authentication over a secure HTTPS connection. Which two steps should the administrator take to implement this change? (Choose two.). Disable HTTP administrative access on the guest SSID to enforce HTTPS connection. Update the captive portal URL to use HTTPS on FortiGate and FortiAuthenticator. Enable HTTP redirect in the user authentication settings. Create a new SSID with the HTTPS captive portal URL.