TADM_70_22

Which of the following is used to determine the assignment of a table to a specific table category? Please choose the correct answer. "Max Extent". "Min Extent". "Next Extent". "Default Initial Extent".

Which of the following is not a support tool for ABAP system copies? Please choose the correct answer. SMIGR. PACKAGE SPLITTER. TABLE SPLITTER. MIGCHECK.

Which ABAP data dictionary definitions are available when you use R3LDCTL to generate structure file for heterogeneous and homogeneous system copies? Please choose the correct answer. Partition fields. View fields. Compression fields. Primary key fields.

What are the important points associated with R3LOAD restart export? There are 2 correct answers to this question. Read next write position in dump file from *.TOC. Read next task with status. Delete table content. Export restarts.

Which of the following type of File can limit the maximum initial extent to a value of 1.78 GB? Please choose the correct answer. R6SZCHK. R3SZCHK. R2SZCHK. R4SZCHK.

You notice that tables were loaded into the wrong database storage unit after a R3LOAD 2 system copy. Which of the following file types must you analyzed? There are 2 correct answers to this question. .TOC. .STR. .EXT. .TPL.

What information can be found in a *.TOC file? There are 3 correct answers to this question. The identifier into which database the export dump can be imported. The first and last data block of the exported table data in the dump file. The total number of rows exported for all packages of a splitted table. The where condition in case of table splitting. The table name, dump file name and header data.

Which of the following is not a R3SETUP/SAPINST load error? Please choose the correct answer. Change into the install directory. Get R3LOAD parameters from file "FILE". Start many additional R3LOAD process. Solve the load problem.

How does an importing MIGMON process identify if all packages were successfully exported in a parallel export/import scenario? Please choose the correct answer. It analyzes the content of the export task files. It verifies the export logs for proper termination. It checks the export statistics properties file for errors. It compares the number of packages vs. the number of signal files.

Which program do you use to perform table splitting during a DMO process? Please choose the correct answer. MIGCHECK. SAPUP. R3TA. R3LOAD.

Select the correct sequence of ABAP DDIC - DB and Runtime from the following option? Please choose the correct answer. SAP transaction SE11-> Database utility -> Select object. SAP transaction SE11-> Runtime object -> Select unit. SAP transaction SE11-> Table view-> Database utility. SAP transaction SE11-> Runtime-> Database utility.

Identify the reasons associated with the Homogeneous system copies? There are 2 correct answers to this question. System move for multiple component. System move into or out MCOD configuration. System move (hardware change). System move into single database.

Which SAP Migration Tool writes its data in a format that is independent of database and platform? Please choose the correct answer. JLOAD. JSLOAD. JSAPINST. JPKCT.

Which tasks does the R3LOAD tool perform? There are 2 correct answers to this question. It compresses data on the block level. It writes platform-dependent dumps. It exports data dictionary definitions. It converts data to Unicode.

Which file does SAPINST use to continue after an error? Please choose the correct answer. control.xml. dialog.xml. keydb.xml. message.xml.

List down the reasons for common Heterogeneous system copy? There are 3 correct answers to this question. Hardware enhancements. Verification sessions. Cost reduction. Performance improvement. Project analysis.

What was the main purpose of the JSPLITTER development? Please choose the correct answer. To check the resource availability for JAVA system. To reduce the import/export runtime for large JAVA system. To run migration system over different application server. To improve the import/export support requirement.

What is required for custom export/import order definitions and even the change of individual parameters for each single package? Please choose the correct answer. PKGNAME. PKGID. ORDER. SAPINST.

Which of the following statements are TRUE regarding R3LOAD ABAP Data Export/Import? There are 2 correct answers to this question. Table splitting for multiple data process. Efficient data compression. Requires syntax check for heterogeneous data import. Implementation is database and platform specific.

What are the steps required to migrate an ABAP based system? There are 2 correct answers to this question. Generate *.TSK files only. Technical migration preparation. Unload export database. Generate R3LOAD control files.

Which source does R3LOAD use to populate the TSK files? Please choose the correct answer. Structure files. ABAP data dictionary. Database data dictionary. Extent files.

Which of the following is not an Initial extent sizes for .EXT calculation? Please choose the correct answer. Target. Primary index. Table. Secondary index.

What are the typical warning in R3SZCHK.log if reaching the size limit? There are 2 correct answers to this question. WARNING: REPOLOAD in SLEXC: initial extent reduced to 1782579201. WARNING: /BLUESKY/FECOND in APPL0: initial extent reduced to 1782579222. WARNING: REPOLOAD in SLEXC: initial extent reduced to 1782579200. WARNING: /BLUESKY/FECOND in APPL0: initial extent reduced to 1782579200.

Which of the following statement is TRUE regarding JMIGMON functions and operation variants? Please choose the correct answer. JMIGMON is used to start JLOAD process only. JMIGMON cannot start JLOAD processes. JPKGCTL will add as many tables to a package until the size limit is reached. JMIGMON should not be inspected in case of export or import errors.

List down the characteristics for both Application Server ABAP (AS ABAP) and Application Server Java (AS Java)? There are 3 correct answer to this question. Common SID for all application servers and database. Common database (with different schemas for ABAP and Java). Common startup framework. Common startup background. Common target database.

Name the function required to adjust the SAP JAVA target system for the new instance name, instance number, host name, etc.? Please choose the correct answer. Migration Director. Migration Controller. LOAD PART. LOAD Controller.

List down the Migration Monitor - Net Configuration Variant? There are 2 correct answers to this question. Network: Export directory is shared between source and target system. FTP: File transfer via FTP between source and target system EH FTP. File transfer via ASP between source and target system. Network: Export directroy is shared with target system.

Identify the migration support tools from the following options? There are 3 correct answers to this question. PACKAGE SPLITTER. TABMON. JSPLITTER. MIGMON.

Which of the following are the sockets using R3LOAD Export/Import? There are 2 correct answers to this question. Features concurrent export and import. Released since R3LOAD 6.40. Fully supported by the SAPINST. Network connection is a must.

What are the general configuration parameters for Migration Monitor (MIGMON)? There are 2 correct answers to this question. Usage parameters. Process parameters. FTP parameters. Socket parameters.

In which Export Dump directory do you find the SQLFiles.LST file? Please choose the correct answer. <Export Dump> /DB. <Export Dump> /DB/ <DBS>. <Export Dump> /DATA. <Export Dump> / <Install Directory>.

How MIGMON is used for concurrent export/import systems? There are 2 correct answers to this question. Technical Post-Migration activities. File transfer via FTP, tape, USB disk, laptop. Splitting test activities. Pre-migration test activities.

JLOAD did not only export the table data, it also generated it own export/import job Files. How JLOAD is creating Job file? Please choose the correct answer. 7.01 JPKGCTL. 7.02 JPKGCTL. 6.0 JPKGCTL. 7 JPKGCTL.

Which of the following option is not a PERL-Based Package Splitter? Please choose the correct answer. Available since release 4.6B, used up to Netweaver '04. Requires Perl version 5 or higher. Backward compatible up to 5.0B. Backward compatible up to 4.0B.

What can you do with the Software Provisioning Manager? Please choose the correct answer. SAP system uninstall. SAP system automated configuration and verification. SAP system upgrade. SAP front end installation and distribution.

What are the major elements of Migration Monitor - Stand-alone Configuration? There are 2 correct answers to this question. Environment system. Target system. Importing system. Exporting system.

You perform a Java dual stack split. Which split options do you have? There are 3 correct answers to this question. Migrate DB. Upgrade DB. Remove. Keep DB. Move DB.

Identify the most suitable option for- "Export JAVA stack and import into the same database; but as MCOD installation. Remove original JAVA stack. Please choose the correct answer. Remove JAVA stack. Move JAVA stack. Keep JAVA database. Move Java database.

Which file does JPKGCTL create to enable an optimized export of packages?. jsplitter_cmd.properties. sizes.xml. split_input.txt. dbsize.xml.

When JPKGCTL/JSPLITTER calculates the package sizes, the results are inserted into a sizes.xml file, which allows JMIGMON to export/import the packages by size. Operating system from type Y to type X. Database type S from version <n> to version <n+x>. Database from type B to type A. Operating system type U to different hardware architecture.

Which features does the database migration option of SUM provide for benchmarking? Note: There are 2 correct answers to this question. Export of specific tables only. Unload using memory sockets. Decluster during export. Export without dump generation.

You perform a Java migration. What information is stored in the sizes.xml Please choose the correct answer. The exported size of each table and index. The calculated size of the target database. The expected export size of each package. The actual size of each data dump file.

What are the operating levels for technical post-migration activities. Set up database storage units. Perform a file system back up. Install the SAP system license. Install the latest SAP system. Set up external interfaces.

In what order are the tasks executed during the export of an AS ABAP source system?. R3LDCTL->R3LOAD->R3SZCHK. R3SZCHK->R3LDCTL->R3LOAD. R3LDCTL->R3SZCHK->R3LOAD. R3LOAD->R3SZCHK->R3LDCTL.

What information can you find in the JLOAD*.STAT.XML files? There are 2 correct answers to this question. Start and end date of export/import. Name of dump files. Number of exported/imported rows. Status of export import.

The ABAP/JAVA dual stack split is not intended to be used in which of the following system?. Homogeneous system. Export system. Heterogeneous system. Import system.

The R3LOAD command line only contains the parameters required for reading the command file and writing a log file. What happens if an R3LOAD process finds a TSK.BCK and a TSK file while starting?. It reads the TSK file and copies it over the TSK.BCK file. It leaves the TSK and TSK.BCK file as they are and terminates. It merges the TSK.BCK file into the existing TSK file. It deletes TSK.BCK file and uses the TSK file.

Name the tables which may not exist in Netweaver systems? There are 2 correct answers to this question. TGAB2. TGDB2. IGAB2. IGDB2.

What options are available in the SAPINST Step State Editor? There are 2 correct answers to this question. Repeat a step. Break at a step. Jump to a step. Mark a step.

What information is contained in the SQLFiles.LST file? Note: There are 2 correct answers to this question. Target database type. Generation timestamp. SAP system type of source system. Location of *.SQL files.

The R3L0AD tool stopped on error during an import. How does R3LOAD proceed when it is started again for the failed package? Note: There are 2 correct answers to this question. It aborts the restart if no process ID file is found for the package. It reads the task file and continues with the first task on status 'err' or 'xeq'. It reads the table of contents file to get the name of the dump file to be read. It changes the import_state.properties package status to '?'.

What are some of the files of the LOADTOOLS.SAR archive delivered with the Software Provisioning Manager (SWPM)? Note: There are 2 correct answers to this question. DDLGEN.TPL. MIGCHECK. R3LDCTL. R3TA table splitter.

Which programs are initiated by DISTMON during export/import? Note:There are 2 correct answers to this question. DIPGNTAB. Time Analyzer. Migration Monitor. R3LOAD.

During a system copy to oracle, a primary key was created for a table which should NOT have one. Which of the following file types do you check to find the error?. *.TOC. *.TSK. *.EXT. *.SQL.

You are restarting a failed R3LOAD Import. From which file does R3LOAD obtain the WHERE condition to delete data of a table split that had been loaded during the failed import?. The task file. The structure file. The where file. The *.SQL file.

Which of the following R3LOAD task files create a primary key? Choose 2 correct answers. <PACKAGE>_DPI.TSK. <PACKAGE>_TPI.TSK. <PACKAGE>_TDI.TSK. <PACKAGE>_DT.TSK.