test09

In which data object do you maintain the production ine as the work center for repetitive manufacturing?(2). Production cost collector. Repetitive manufacturing profile. Production version. Routing.

MRP created a planned order for a material that has one single material from stock as a component.What happens to this dependent requirement when you convert the planned order into a production order?. It is converted into a schedule line. It is converted into a reservation. It is converted into a planned order. It is converted into a production order.

You want to set up a meke-to order planning scenario for a finished material.Some components from the bill of materials(BOM) should be procured per sales order.other components should be procured for various requirements.Forecasting is NOT possible.Which setting do you make to achieve this?. Planning strategy 50(Planning without final assembly)and the corresponding Mixed MRP indicator. Planning strategy 50(Planning without final assembly)and the corresponding individual Collective indicator. Planning strategy 20(Make-to-Order)and the corresponding individual Collective indicator. Planning strategy 20(Make-to-Order)and the corresponding Mixed MRP indicator.

You want to create a production order from a planned order.What methods could you use?(2). Order release. Individual conversion. Partial conversion. FUll conversion.

In your project,you have several materials that are planned by different people.How can you assign the planning responsiblity?. MRP planning file. MRP group. MRP type. MRP controller.

A material has been set up as a phantom assembly by entering the special procurement key in the material master.How can you switch off the phantom assembly in a specific bill of material(BOM)?. Change the phantom item indicator for the phantom assembly in the BOM. Change the item category of the phantom assembly in the BOM. Change the special procurement key of the phantom assembly in the BOM. Change the explosion type of the phantom assembly in the BOM.

Your client is asking for your advice on material master numbering in SAP S/4HANA.What do you need to consider?(2). The number of leading zeros for internal numbers is client-specific. In Customizing you can decide by material type whether to use the long material number.-specific. The maximum mater all number length is 40 for external numbers and 18 for internal numbers. The display template for material numbers applies to all clients.

Your company produces a finished good based on a forecast and expects it to being stock when customers order it.If customers order more than the forecasted quantity,the production quantity should be increased to try to meet the extra demand.Which planning strategy do you use?. Make-to-stock production(10). Planning without final assembly(50). Make-to-order production(20). Planning with fianl assembly(40).

What are possible configuration steps when setting up the alert monitor in Advanced Planning?(3). Create object selection variant for product-related alerts. Assign the overall profile to the authorization profile. Assign the alert profile to the overall profile. Create objcet selection variant for transportation lane-related alerts. Create objcet selection variant for resource-related alerts.

You want to schedule an operation finitely,without moving other operat ons.Which scheduling strategy do you select?. Squeezeing. Insert operation. Find slot. Scheduling working time only.

You want to triggering-house production of a semi-finished mater al before a saled order for the corresponding finished good is received.Which planning strategy supports the comsumption of planned independent requirements for the semi-finished material?. Planning with final assembly(40). Make-to-order production(20). Planning at assembly level(70). Planning without fianl assembly(50).

When can the material availabity check occur automatically in a production order?(2). At order release. At order settlement. At order creation. At order confirmation.

Which time elements are part of a routing operat on?(3). Wait time. Pick/pack time. Move time. Queue time. Float befor production.

Your quality department detects a deviation in a raw material batch.Unfortunately,this batch has already been used in production.How can you identify all effected finished goods stocks?. Use the material staging report. Use the batch information cockpit. Use batch determination. Use the material staging report.

How would you define pegging in the context of Advanced Planning?. An evaluation to verify if there are overstock situations in the balance between receipt and issue elements after the production planning run. An evaluation to verify if there are mater al or capacity shortage in the network after the production planning run. An evaluation that is ordered according to the bill-of-material structure of all related products and represents the relationship between the receipt and the issue elements. An evaluation that is ordered according to the network structure of all related products and represents the converage of issue elements with receipt elements.

You have a scheduling agreement with a vendor.You want classic MRP to automat cally create schedule lines in case of material shortage.What must you do?(2). Add the agreement to the source list and mark it for MRP relevance. Set the creation indicator for delivery schedule lines on the initial screen of the MRP run. Set the creation indicator for purchase requisitions on the initial screen of the MRP run. Add the agreement to the quota arrangement and mark it for MRP relevance.

You have maintained the parameters for simple discontinuation the material master of a component.Which business process will be affected if the available stock is zero and the discontinuation dateis in the past?. Back flushing. production order release. Kanban. Material requirements planning.

How can SAP S/4HANA support a GMP compliant production process?(3). Use of the digital signature function to check and run business processed. Predefined GMP compliant process order types to meet audit requirements. Use of the GMP compliant flag in relevant master data applications. Documentation of quality data with Quality Management. Recipe approva with Engineering Change Management.

For a production version to be valid and consistent what requirements must be fulfilled?(3). The deletion flag must NOT be set for the bill of materials(BOM)or the routing. The assigned routing and bill of materials(BOM) must be valid in the entire validity period. The lot size range must be within the lot-size range of the assigned routing. The assigned routing must be a rate routing. The assigned routing must NOT hava alternative sequences.

Which options do you have to plan both quant ties and capacities during line loading in repetitive manufacturing?(2). Assign planned orders manual lying the planning table. Run MRP with quota arrangement. Run MRP with automatic selection of production version. Run PP/DS heuristics for repetitive manufacturing.

How can you limit the validity of a bill of material(BOM)?(2). By period. By plant. By industry. By material type.

Your project team decides to use a make-to-order planning strategy for a strategic material in discrete manufacturing.What is the impact of this decision?(3). Sales order-specific stock is created. Production orders are created with sales order reference. Sales order-specific planning run is required. Storage location MRP areas are required. Net requirements calculation is sales order-specific.

What does it mean for the production planner when MRP works with infinite capacities?. MRP assigns capacity requirements automatically to work center is with the earliest available capacity. MRP creates capacity requirements only if the work center has sufficient capacity. MRP assigns capacity requirements automatically after the last scheduled order on a work center. MRP creates capacity requirements without checking the capacity of a work center.

How can you set up the supply source for the SAP Kanban process?(3). Using stock transfer reservations for stock transfer. Using purchasing costs for automated source prioritization. Using purchase orders for external procurement. Using quotations for internal and external procurement. Using run schedule quantities for in-house production.

What does a line hierarchy in repetitive manufacturing represent?. A production line with an alternative sequence in the routing. A production line with a parallel sequence in the routing. A production line with prioritized alternative work centers. A production line with more than one work center.

You need to model goods receipt processing time in Detailed Scheduling.Which modelling options do you have?(2). Model a handling resource in the location master and goods receipt time in the mater all master. Model a resource inbound in the location master. Model a transportation resource in the location master. Model a separate resource in the produciton data structure.

Mode selection is one of the scheduling options available in Advanced Planning in SAP S/4HANA.When can you use mode selection?. When alternate resources are used within one operation. When multiple planned orders existion one resource. When multiple production versions are maintained for one product. When multiple operations are maintained for one product.

In your plant,MRP is activated.Which options do you have to exclude a material from the MRP run?（2）. Use a specific MRP controller. Use a specific material group. Use a specific material status. Use a specific MRP type.

You want to perform capacity availability checks on your production orders.What must be set for this to occur?(2). Checking control must have an overall profile assigned in customizing. PRT Availability check must be set. Checking rule and group must be assigned. Indicator Relevant for finite scheduling must be set.

If the stock level drops below the reorder stock in reorder point planning,what is the sysytem logic to trigger procurement?. Fill up to the reorder stock level. Fill up to the maximum stock level. Fill up to the safety stock level. Fill up based on the lot size procedure.

Which time elements can be reduced by a reduction strategy?（3）. Wait time. Move time. Goods receipt processing time. Queue time. Float after production.

When working with both cross-plant and plant-specific material statuses in the mater al master,which status has the highest prority?. The cross-plant status. The plant-specific status. The most restrictive status. The least restrictive status.

Which master data object governs the relationship between supply source and demand source in the Kanban process?. Production supply area. Rate routing. Replenishment strategy. Control cycle.

What are the consequences when you assign a planned order to a production line manually,using the planning tablein repetitive manufacturing?. The planned order's component availability is checked. The planned order's component are copied from the picking list. The planned order generates capacity requirements. The planned order is converted to a production order.

Which actions does the system perform by default when you save a confirmation for a finished product in repetitive manufacturing?(3). Posting of goods receipt for the product. Posting of production costs to the production cost collector. Material staging for next order in sequence. Reduction of associated capacity requirements. Archiving of documents for assembly scrap.

Which SAP solutions can be used for forecast ng in Supply Chain Planning?（2）. Integrated Business Planning(IBP). Material Requirements Planning(MRP). Capacity Requirements Planning(CRP). Supply Chain Management(SCM).

In a production process,you need a certain amount of iquid as input material.The source tank is directly connected to the reactor.How can you process consumption posting?. Picking list. Kanban. Backflushing. Transger order.

Your project uses process orders for the production of iquid chemicals.What can you define to ensure that the production flow happens only in physically connected tanks?. Resource network. Work center hierarchy. Setup matrix. Operation network.

Which SAP solutions support the supplier area in the portfolio of the Digital Value Network?(3). SAP S/4HANA. SAP Ariba. SAP Concur. SAP SucessFactors. SAP Field glass.

What does the industry sector determine?(2). Whether a material master field is required,changeable,displayed,or hidden. Whether material numbers are assigned internally or externally. Which transaction you can use to create a new material. Which material master views can be maintained.

What is the purpose of a reporting point confirmation in repetitive manufacturing?（2）. To reduce the total production lead time for along production line. To stage different components for a production line simultaneously. To provide timely updates of inventory management for the staged components. To determine the work in progress along the production line.

Which materials have a negative quantity in a bill of materials or in a recipe?（3）. Waste products. Bulk materials. By-products. Continuous flow materials. Co-products.

You want to reduce planning efforts for B/C materials.Which planning procedure do you recommend?. Consumption-based planning. Manual planning without check. Material requirements planning. Forcast planning.

You use planning strategy Finite Scheduling - with Reverse and want to allow scheduling in the past.How can you achieve this?. Specify a positive offset time in the strategy profile. Specify a positive planning horizon in the strategy profile. Specify a negative offset time in the strategy profile. Specify a negative planning horizon in the strategy profile.

When do you use variant bills of materials(BOMB)?. When a material has multiple BOM. When a material has a configurable BOM. When multiple material also have the same BOM. When multiple material is have similar BOM.

What are the possible results of a production planning run in Advanced Planning(PP/OS)?(3). Planned order. Purchase requisition. Stock transport order. Production order. Scheduling agreement schedule line.

Which time elements does MRP consider in backward scheduling to determine the order dates for components from dependent requirements?(2). In-house production time. Total replenishment lead time. Operation duration. Planned delivery time.

If you use floats to limit dispatching in capacity planning,what type of time element can be reduced by strategy settings while dispatching?. Queue time. Goods receipt processing time. Production time. Minimum wait time.

Where do you maintain the duration of a product on operation?. Bill of material(BOM). Routing. Work instructions. Material master.

What data can you maintain in the sub items of a bill of material(BOM)?(2). Scrap percentage. Quantity. Item type. Installation point.

Which time elements are relevant for lead time scheduling of a product on order?(2). Total replenishment lead time. Setup time. Planned delivery time. Float after production.

Which bill of material(BOM) categories can you define in SAP S/4HANA?(2). Work Center BOM. Functional Location BOM. Sales Order BOM. Class BOM.

Which of the following processes lead to an entry in the MRP planning file?(3). Change of the material's procurement type. Change of the storage bin. Change of a purchasing contract. Change of a sales order. Change of dependent requirements.

The MRP run detected a shortage of a material that you source from an external supplier in full pallets.How can you make sure you will only receive full pallets?. Use the reorder point. Use the fixed lot size procedure. Use the MRP type for vendor managed inventory. Use the minimum order quantity.

What could be the reason for multiple commitment of individual capacities,where several operations have the same scheduled dates on a resource after capacity planning?（2）. Alternative resource are fully occupied. The work center has several individual capacities. The Change planning Direct on indicator is set. The planning strategy is infinite.

You are working with planning strategy 40(Planning-with-final assembly).When does consumption of planned independent requirements take place?. When you deliver a sales order. When you create a planned order. When you create a sales order. When the MRP results are saved.

Advanced Planning uses master data and transaction data from SAP S/4HANA in which data object can you set the advanced planning flag?(2). Material. Work center. Production version. Plant.

What is the difference between co-products and by-products?. Only by-products have a zero inventory valuation. Only co-products can be manufactured in isolation from the main product. Only co-products are identified by a special item category in the bill of material(BOM). Only co-products appear in the process or production order settlement rule.

How can you achieve a feasible production plan in case of capacity constraints?（3）. Adjust the available capacity. Select an alternative mode on a resource. Reduce the planning window. Form optimum sequences to reduce setup times. Execute a new production planning run.

What is the purpose of collective orders?. To post production costs on a cost collector instead of the production order. To manage production orders for an entire finished product on multiple levels. To combine order management of co-products and by-products with the main product. To post any component withdrawals single back flush with order confirmation.

Which chart types does the tabular planning table provide in SAP S/4HANA?(2). Capacity requirements chart. Work center capacities chart. Order(pool)chart. C.Orders(dispatched).

An issue storage location was NOT found through the work center,bill of material(BOM)item,or material master.What determines whether the storage location can be derived from the production version?. MRP Profile. Plant Data. MRP Group. MRP Controller.

What are some uses for the low-level code assigned to each material?(2). It is used by ATP to determine the priority of alternative components. It is used by product costing to determine how costs are rolled up. It is used by engineering to identify sub items in an engineering bill of material(BOM). It is used in MRP to determine the sequence in which materials are planned.

What are the consequences if operation status Dispatched is set for a production order operation?. You can reschedule the operation using finite Scheduling in a planning board. You can reschedule the order using lead time scheduling. You can reschedule the order using material requirements planning. You can reschedule the operation using lead the scheduling.

For what production type are production orders used?. Discrete manufacturing processes. Replenishment controlled by control cycles. Period and quantity-oriented production. Process manufacturing processes.

Where does the system check master data selection settings during the creation of planned orders and production orders?（3）. In the MRP controller. In the production version. In the routing. In the production order type.

Why would you use phantom assemblies?（3）. To reduce the number of materials masters. To reduce the number of changes required in bills of material. To increase the number of planning levels. To make the assignment of componenets easier. To simplify the structure of bills of material.

Which of the following business processes are controlled by parameters that are dependent on production order type?（2）. Engineering cahnge management. Implementation. Planning. Inspection during production.

How can you carry out cost object controlling for production orders?（2）. Cost-related. Product-related. Order-related. Milestone-related.

Which of the following is a valid sequence of the main activities in product on order processing?. Creation,scheduling,release,variance calculation,confirmation. Creation,scheduling,release,material withdrawal,confirmation. Creation,staging,release,material withdrawal,confirmation. Creation,release,scheduling,material withdrawal,confirmation.

What does forecasting in the demand planning cycle include?(3). Past quotation quantities. One-off events. Market intelligence. Past sales order quantities. Past procurement quantities.

What is a work center hierarchy in SAP S/4HANA capacity planning?. A group of work centers in a production line being used in sequence for production. A group of work centers in a parallel sequence that is used to split product on quantities and work on them in parallel. A group of alternative work centers for production,structured in hierarchy levels by prior ties. A group of alternative work centers providing a cumulative available capacity for production.

Your production planners must execute planning only for specific resources.How can you achieve this in Advanced Planning(PP/OS)?. Use a planning group. Use a resource group. Use a heuristic. Use a propagation range.

Which of the following elements does MRP take into account during net requirement calculation?（2）. Lot size. Purchase orders. Maximum stock level. Safety stock.

What determines whether the planned independent requirements in MRP consume other requirements?. Requirements profile. Consumption sequence procedure. Requirements type. Order type.

During production order creation,several valid production versions are found.How does the system choose the product conversion?. Validity period or sales order. Alphanumeric or quota arrangement. Lot size or material cost. Planned order or material number.

What do you use to schedule operations from planned orders so that the production plan can be fulfilled?. Capacity Requirements Planning(CRP). Supply Network Planning(SNP). Material Requirements Planning(MRP). Demand Planning(DP).

You want to insert an operation at a certain time on a work center.The planning direciton is forward.The desired dispatching time coincides with an operation that has previously been dispatched.How does the insertion take place?. The previously dispatched operation stays assist the new operation is inserted before the dispatiched operation. The previously dispatched operation stays as is the new operation is inserted before the dispatiched operation. The new operation is inserted at the desired time the proviously dispatched operation is moved forward. The new operation is inserted at the desired time the proviously dispatched operation is moved backward.

In the Schedule Production app,which settings can you make in the planning strategy?（3）. Planning mode(bucket/sequence). Direciton(forward/backward). Finiteness level(0...1). Scheduling control(finite/infinite). Fixed pegging(on/off).